Panasonic KX-TDA30 User manual

Thank you for purchasing a Panasonic Hybrid IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDA30: PSMPR Software File Version 5.0000 or later
KX-TDA100/KX-TDA200: PMPR Software File Version 5.0000 or later
KX-TDA600: PLMPR Software File Version 5.0000 or later
Model No. KX-TDA30/KX-TDA100
KX-TDA200/KX-TDA600
Hybrid IP-PBX
User Manual

Feature Highlights
IP Communication
This PBX supports IP communication using
a variety of IP telephones, such as the
KX-NT300 series with Bluetooth wireless
headsets.
R
IP Softphone
IP Proprietary
Telephone
You can install a software-based telephone
(Panasonic IP Softphone) on your PC to make
and receive calls using Internet Protocol (IP)
and access PBX features without a wired IP
Proprietary Telephone.
IP Softphone
Consult your dealer Consult your dealer
This PBX can establish Incoming Call Distribution
Groups (ICD Group) by which a large volume of
calls from the external customers could be
received. One extension can act as the supervisor,
and monitor other group members.
Call Centre
Queuing
Customers
ICD
Group 01
ICD
Group 02
You can forward your calls to a voice
processing system and let calling parties leave
messages in your mailbox when you are unable
to receive calls.
Voice Mail Integration
Message Message
Message Message
1.9 Utilising the Call Centre (Page 140) 1.10.5 If a Voice Processing System is Connec-
ted (Page 152)
This PBX optionally supports a Portable Station
(PS) system. PSs can be used in the PBX
with other wired telephones.
Wireless System
PC Phone/PC Console
This PBX supports the PC Phone/PC Console
when your PC is connected to certain Panasonic
telephones via USB interface. The PC Phone/
PC Console provides advanced control and
monitoring of your PBX.
PC
Section 4 Appendix (Page 219) Consult your dealer
2 User Manual
Feature Highlights

If you are using a certain Panasonic telephone
that is equipped with a Navigator Key/Jog Dial
and a display, it helps you to access the desired
feature easily. Also, you will be informed of the
arrival of an incoming call or a message waiting
by the lamp if it is equipped.
Easy Operation
ENTER
Navigator Key Jog Dial Message/Ringer Lamp
This PBX can record or print out call
information: date, time, extension no., dialled
no., duration, etc.
Date
01/02/02
01/02/02
Time
10:03AM
11:07AM
Ext
1230
2230
• • • • • • •
• • • • • • •
• • • • • • •
Call Record
(Station Message Detail Recording)
1.1 Before Operating the Telephones
(Page 18)
Consult your dealer
You can set incoming calls to be redirected
to your message box to let callers leave voice
messages when you are unable to answer
the phone.
Built-in Simplified Voice Message
Hello, this
is 204. Please
leave your
message.
1.6.2 Using Voice Messaging (Built-in Simplified
Voice Message [SVM]) (Page 102)
In This Manual,
•The following abbreviations are used:
APT ® Analogue Proprietary Telephone
Display PT ® Proprietary Telephone with a Display
DPT ® Digital Proprietary Telephone
IP-PT ® IP Proprietary Telephone
PS ® Portable Station
PT ® Proprietary Telephone
SLT ® Single Line Telephone
•The suffix of each model number is omitted.
•The illustrations of the PBX are based on the KX-TDA200.
•The following icons are used frequently.
ConditionsHints
!!
!!
User Manual 3
Feature Highlights

Notice
•Under power failure conditions, the connected telephones may not operate. Please ensure that a separate
telephone, not dependent on local power, is available for emergency use.
•Prior to connection of this product, please verify that the intended operating environment is supported.
Satisfactory performance cannot be guaranteed for the following:
–interoperability and compatibility with all devices and systems connected to this product
–proper operation and compatibility with services provided by telecommunications companies over
connected networks
NOTES
•This manual provides basic information on how you can access commonly used PBX functions with
proprietary telephones (PTs), single line telephones (SLTs), portable stations (PSs), and DSS Consoles.
For detailed information about each feature or setting, consult your dealer.
•In this manual, several kinds of PTs appear, as follows:
–IP Proprietary Telephone (IP-PT)
–Digital Proprietary Telephone (DPT)
–Analogue Proprietary Telephone (APT)
–Proprietary Telephone with a Display (Display PT)
"PT" is used as a generic term to represent all of these PTs. If a PBX feature only supports specific PTs,
such as IP-PTs, the available telephone types are clearly indicated.
•IP-PTs may become busy and you may not be able to make or receive calls, depending on the network
status.
•The contents of this manual apply to PBXs with a certain software version, as indicated on the cover of
this manual. To confirm the software version of your PBX, consult your dealer.
•Product specifications are subject to change without notice.
4 User Manual
Feature Highlights

Safety Notices
Please observe the safety notices in this manual in order to avoid danger to users or other people, and prevent
damage to property.
The notices are classified as follows, according to the severity of injury or damage:
WARNING This notice means that misuse could result in death or serious injury.
CAUTION This notice means that misuse could result in injury or damage to property.
Trademarks
•The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under licence.
•All other trademarks identified herein are the property of their respective owners.
User Manual 5
Feature Highlights

Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk
of fire, electric shock and injury to persons, including the following:
•Do not use the product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool.
•Avoid using wired telephones during an electrical storm. There is a remote risk of electric shock from
lightning.
•Do not use a telephone in the vicinity of a gas leak to report the leak.
SAVE THESE INSTRUCTIONS
6 User Manual
Important Safety Instructions

Important Information
SAVE THESE INSTRUCTIONS
WARNING
SAFETY REQUIREMENTS
For All Telephone Equipment
•The product may only be installed and serviced by qualified service personnel.
•To prevent possible fire or electric shock, do not expose the product to rain or moisture.
•Follow all warnings and instructions marked on the product.
•Do not place the product on an unstable surface, as a fall may cause serious internal damage.
•The product should only be connected to the type of electrical power supply specified on the product label.
If you are not sure of the type of power supply to your home, consult your dealer or local power company.
•For safety purposes some products are equipped with an earthed plug. If you do not have an earthed outlet,
please have one installed. Do not bypass this safety feature by tampering with the plug.
•Do not allow anything to rest on the power cord. Do not locate the product where the power cord may be
stepped on or tripped on.
•To reduce the risk of fire or electric shock, do not overload wall outlets and extension cords.
•To reduce the risk of electric shock, do not disassemble the product. Only qualified personnel should
service the product. Opening or removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock.
•Unplug the product from the wall outlet and have it serviced by qualified service personnel in the following
cases:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate according to the operating instructions. Adjust only the controls that are
explained in the operating instructions. Improper adjustment of other controls may result in damage
and may require service by a qualified technician to restore the product to normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. If product performance deteriorates.
For the PBX
•If damage to the unit exposes any internal parts, disconnect the power supply cord immediately and return
the unit to your dealer.
•Unplug this unit from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise. These
conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorised
Panasonic Factory Service Centre.
•This unit is equipped with an earthed plug. For safety reasons this plug must only be connected to an
earthed outlet that has been installed according to applicable regulations.
•Do not insert objects of any kind into this product through its slots and openings, as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill
liquid of any kind on or in the product.
•Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire, as
they may explode. Dispose according to local regulations.
CAUTION
User Manual 7
Important Information

SAFETY REQUIREMENTS
For All Telephone Equipment
•The product should be kept free of dust, moisture, high temperature (more than 40 °C), and vibration, and
should not be exposed to direct sunlight.
•Unplug the product from the wall outlet before cleaning. Wipe the product with a soft cloth. Do not clean
with abrasive powders or with chemical agents such as benzene or thinner. Do not use liquid cleaners or
aerosol cleaners.
For the PBX
•When relocating the equipment, first disconnect the telecom connection before disconnecting the power
connection. When the unit is installed in the new location, reconnect the power first, and then reconnect
the telecom connection.
•The power supply cord is used as the main disconnect device. Ensure that the AC outlet is located near
the equipment and is easily accessible.
•Slots and openings in the front, back and bottom of the cabinet are provided for ventilation; to protect it
from overheating, these openings must not be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar surface while in use. The product should never
be placed near or over a radiator or other heat source. This product should not be placed in a sealed
environment unless proper ventilation is provided.
•To protect this unit from static electricity, do not touch any external connectors of the unit.
For the Cell Station
2.4 GHz Cell Station (Except for KX-TDA0151CN)
Medical—consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they
are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range
of 2401 MHz to 2480 MHz, and the power output level can range from 0.004 W to 0.4 W.) Do not use the unit
in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to external RF (radio frequency) energy.
2.4 GHz Cell Station (Only for KX-TDA0151CN)
Medical—consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they
are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range
of 2401 MHz to 2480 MHz, and the output peak power level is less than 0.16W.) Do not use the unit in health
care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF (radio frequency) energy.
DECT Cell Station
Medical—consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they
are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range
of 1881 MHz to 1898 MHz, and the output peak power level is less than 0.25 W.) Do not use the unit in health
care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF (radio frequency) energy.
DECT 6.0 Cell Station
Medical—consult the manufacturer of any personal medical devices, such as pacemakers, to determine if they
are adequately shielded from external RF (radio frequency) energy. (The unit operates in the frequency range
of 1920 MHz to 1930 MHz, and the output peak power level is less than 0.12 W.) Do not use the unit in health
care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF (radio frequency) energy.
SECURITY REQUIREMENTS
In order to use the PBX safely and correctly the Security Requirements below must be observed. Failure to do
so may result in:
8 User Manual
Important Information

•Loss, leakage, falsification or theft of user information.
•Illegal use of the PBX by a third party.
•Interference or suspension of service caused by a third party.
What is User Information?
User Information is defined as:
1. Information stored on the SD Memory Card:
Phonebook data, user IDs, system settings data, passwords (User/Administrator/Installer), Personal
Identification Numbers (PINs), etc.
2. Information sent from the PBX to a PC or other external device:
Phone call data (including telephone numbers of outside parties), call charge data, etc.
Requirements
1. The SD Memory Card contains software for all the processes of the PBX and all customer data. It can be
easily removed and taken away from the PBX by a third party. Therefore, do not allow unauthorised access
to prevent data leakage.
2. Always make backups of data stored on the SD Memory Card. For details, consult your dealer.
3. To prevent illegal access from the Internet, activate a Firewall.
4. To avoid unauthorised access and possible abuse of the PBX, we strongly recommend:
a. Keeping the password secret.
b. Selecting a complex, random password that cannot be easily guessed.
c. Changing your password regularly.
5. Perform the following when sending the PBX for repair or handing it over to a third party.
a. Make a backup of data stored on the SD Memory Card.
b. Using an SD formatter, format the SD Memory Card so that information cannot be retrieved from it.
6. To prevent data leakage, render the SD Memory Card physically unusable before disposal.
7. When user information is sent from the PBX to a PC or other external device, the confidentiality of that
information becomes the responsibility of the customer. Before disposing of the PC or other external device,
ensure that data cannot be retrieved from it by formatting the hard disk and/or rendering it physically
unusable.
Notice
SAFETY REQUIREMENTS
For All Telephone Equipment
•Read and understand all instructions.
For the PBX
•Keep the unit away from heating appliances and devices that generate electrical noise such as fluorescent
lamps, motors, and televisions. These noise sources can interfere with the performance of the PBX.
•If you are having problems making calls to outside destinations, follow this procedure to test the outside
lines:
1. Disconnect the PBX from all outside lines.
2. Connect known working single line telephones (SLTs) to those outside lines.
3. Make a call to an external destination using those SLTs.
If a call cannot be carried out correctly, there may be a problem with the outside line that the SLT is
connected to. Contact your telephone company.
If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX to the
outside lines until it has been serviced by an authorised Panasonic Factory Service Centre.
Notes
User Manual 9
Important Information

SAFETY REQUIREMENTS
For All Telephone Equipment
•Never attempt to insert wires, pins, etc. into the vents or holes of the product.
10 User Manual
Important Information

Attention
•When using a Panasonic proprietary telephone (PT), use only the correct Panasonic handset.
•For users of PC Phone (Free Licence Version) shipped with KX-DT301/KX-T7601 USB Module:
All features of the PC Phone software are available for 90 days from the date of installation.
After this period expires, the following buttons on the Operation Screen will become unavailable:
–Recording
–TAM
–Voice Memo
–Text Memo
–Speed
To continue using any of the corresponding features after the trial period, please purchase KX-TDA0350
(PC Phone, 5 licences).
For users in the European Union only
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that
used electrical and electronic products and batteries should not be mixed with general
household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take
them to applicable collection points, in accordance with your national legislation and the Di-
rectives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resour-
ces and prevent any potential negative effects on human health and the environment which
could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please
contact your local municipality, your waste disposal service or the point of sale where you
purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or sup-
plier for further information.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies
with the requirement set by the Directive for the chemical involved.
For users in New Zealand only
•This equipment shall not be set to make automatic calls to the Telecom ’111’ Emergency Service.
•The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted
that the item complies with minimum conditions for connection to its network. It indicates no endorsement
User Manual 11
Attention

of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance
that any item will work correctly in all respects with another item of Telepermitted equipment of a different
make or model, nor does it imply that any product is compatible with all of Telecom’s network services.
•APPLICABLE ONLY TO TELECOM CUSTOMERS WHO HAVE AUTOMATIC ACCESS TO OTHER
CARRIERS FOR TOLL CALLS
When calling back a number from the Caller ID list, all numbers prefixed with "0 + AREA CODE" will be
automatically forwarded to your toll carrier. This includes numbers in your local calling area. The zero +
area code should either be removed when calling back local numbers, or check with your toll carrier that
a charge will not be levied.
•All persons using this device for recording telephone conversations shall comply with New Zealand law.
This requires that at least one party to the conversation is to be aware that it is being recorded. In addition,
the principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the
personal information collected, the purpose for its collection, how it is used, and what is disclosed to any
other party.
12 User Manual
Attention

Table of Contents
1 Operation ................................................................................................17
1.1 Before Operating the Telephones .................................................................................18
1.1.1 Before Operating the Telephones ..................................................................................18
1.2 Making Calls ....................................................................................................................31
1.2.1 Basic Calling ...................................................................................................................31
1.2.2 Easy Dialling ...................................................................................................................36
1.2.3 Redial .............................................................................................................................39
1.2.4 When the Dialled Line is Busy or There is No Answer ...................................................40
1.2.5 Accessing the ISDN Service (ISDN Service Access) .....................................................48
1.2.6 Alternating the Calling Method (Alternate Calling—Ring/Voice) ....................................49
1.2.7 Calling without Restrictions ............................................................................................50
1.2.8 To Access Another Party Directly from Outside (Direct Inward System Access
[DISA]) ............................................................................................................................51
1.2.9 Setting Your Telephone from Another Extension or through DISA (Remote
Setting) ...........................................................................................................................54
1.3 Receiving Calls ................................................................................................................55
1.3.1 Answering Calls ..............................................................................................................55
1.3.2 Answering Hands-free (Hands-free Answerback) ..........................................................56
1.3.3 Answering a Call Ringing at Another Telephone (Call Pickup) ......................................57
1.3.4 Answering a Call via an External Speaker (Trunk Answer From Any Station
[TAFAS]) .........................................................................................................................58
1.3.5 Using the ANSWER/RELEASE Button ..........................................................................59
1.3.6 Identifying Malicious Calling Parties (Malicious Call Identification [MCID]) ....................61
1.4 During a Conversation ....................................................................................................62
1.4.1 Transferring a Call (Call Transfer) ..................................................................................62
1.4.2 Holding a Call .................................................................................................................66
1.4.3 Talking to Two Parties Alternately (Call Splitting) ..........................................................70
1.4.4 Answering Call Waiting ..................................................................................................72
1.4.5 Multiple Party Conversation ...........................................................................................77
1.4.6 Mute ...............................................................................................................................86
1.4.7 Letting Other People Listen to the Conversation (Off-hook Monitor) .............................87
1.4.8 Using the Headset (Headset Operation) ........................................................................88
1.5 Using a PDN/SDN Button ...............................................................................................90
1.5.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension
(KX-TDA100/KX-TDA200/KX-TDA600 only) ..................................................................90
1.6 Before Leaving Your Desk .............................................................................................94
1.6.1 Forwarding Calls ............................................................................................................94
1.6.2 Using Voice Messaging (Built-in Simplified Voice Message [SVM]) ............................102
1.6.3 Showing a Message on the Caller’s Telephone Display (Absent Message) ................113
1.6.4 Preventing Other People from Using Your Telephone (Extension Dial Lock) ..............115
1.7 Making/Answering an Announcement ........................................................................117
1.7.1 Paging ..........................................................................................................................117
1.7.2 Answering/Denying a Paging Announcement ..............................................................119
1.7.3 Making an Announcement and Having a Multiple Party Conversation
(Broadcasting) ..............................................................................................................120
1.8 Setting the Telephone According to Your Needs ......................................................123
1.8.1 Setting the Alarm (Timed Reminder) ............................................................................123
1.8.2 Refusing Incoming Calls (Do Not Disturb [DND]) .........................................................125
1.8.3 Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper
OHCA) ..........................................................................................................................129
1.8.4 Displaying Your Telephone Number on the Called Party and Caller’s Telephone (Calling/
Connected Line Identification Presentation [CLIP/COLP]) ...........................................130
User Manual 13
Table of Contents

1.8.5 Preventing Your Telephone Number Being Displayed on the Caller’s Telephone
(Connected Line Identification Restriction [COLR]) ......................................................131
1.8.6 Preventing Your Number Being Displayed on the Called Party’s Telephone (Calling Line
Identification Restriction [CLIR]) ...................................................................................132
1.8.7 Preventing Other People from Joining Your Conversation (Executive Busy Override
Deny) ............................................................................................................................133
1.8.8 Turning on the Background Music (BGM) ....................................................................134
1.8.9 Protecting Your Line against Notification Tones (Data Line Security) ..........................135
1.8.10 Checking the Time Service Status ...............................................................................136
1.8.11 Setting the Parallelled Telephone to Ring (Parallelled Telephone) ..............................137
1.8.12 Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel
Mode) ...........................................................................................................................138
1.8.13 Clearing Features Set at Your Extension (Extension Feature Clear) ...........................139
1.9 Utilising the Call Centre ................................................................................................140
1.9.1 Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap-up) .....................140
1.9.2 Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming
Call Distribution Group Monitor) ...................................................................................143
1.9.3 Forwarding a Waiting Call (Manual Queue Redirection) ..............................................146
1.10 Using User-supplied Equipment ..................................................................................147
1.10.1 If a Doorphone/Door Opener is Connected ..................................................................147
1.10.2 If an External Relay is Connected ................................................................................149
1.10.3 If an External Sensor is Connected ..............................................................................150
1.10.4 If a Host PBX is Connected ..........................................................................................151
1.10.5 If a Voice Processing System is Connected .................................................................152
1.11 Administrative Features ...............................................................................................158
1.11.1 Using the Telephones in a Hotel-type Environment (Hospitality Features) ..................158
1.11.2 Recording Information Using Preprogrammed Messages (Printing Message) ............165
1.12 After Moving to a New Location in the Office .............................................................166
1.12.1 Using the Same Settings as Your Previous Extension (Walking Extension) ................166
1.13 Using a Display Proprietary Telephone ......................................................................167
1.13.1 Using the Call Log ........................................................................................................167
1.13.2 Using the Directories ....................................................................................................170
1.13.3 Accessing System Features (System Feature Access) ...............................................178
2 Manager Operation ..............................................................................179
2.1 Control Features ...........................................................................................................180
2.1.1 Extension Control .........................................................................................................180
2.1.2 Time Service Mode Control ..........................................................................................181
2.1.3 Restriction Level Control (Dial Tone Transfer) .............................................................183
2.1.4 Turning on the External Background Music (BGM) ......................................................184
2.1.5 Recording Outgoing Messages (OGM) ........................................................................185
2.1.6 Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out) .....................188
2.1.7 Releasing Network Direct Station Selection (NDSS) Monitor ......................................189
3 Customising Your Phone & System ...................................................191
3.1 Customising Your Phone (Personal Programming) ..................................................192
3.1.1 Customising Your Phone (Personal Programming) .....................................................192
3.1.2 Settings on the Programming Mode .............................................................................194
3.1.3 Customising the Buttons ..............................................................................................204
3.2 Manager Programming .................................................................................................209
3.2.1 Programming Information .............................................................................................209
3.2.2 Manager Programming .................................................................................................210
3.3 Customising Your System (System Programming) ...................................................212
3.3.1 Programming Information .............................................................................................212
3.3.2 System Programming ...................................................................................................215
14 User Manual
Table of Contents

4 Appendix ...............................................................................................219
4.1 Troubleshooting ............................................................................................................220
4.1.1 Troubleshooting ............................................................................................................220
4.2 Feature Number Table ..................................................................................................224
4.2.1 Feature Number Table .................................................................................................224
4.3 What is This Tone? .......................................................................................................234
4.3.1 What is This Tone? ......................................................................................................234
4.4 Revision History ............................................................................................................238
4.4.1 KX-TDA600 PLMPR Software File Version 3.1xxx ......................................................238
4.4.2 KX-TDA600 PLMPR Software File Version 5.0xxx ......................................................239
4.4.3 KX-TDA100/KX-TDA200 PMPR Software File Version 1.1xxx ....................................240
4.4.4 KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx ....................................241
4.4.5 KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx ....................................242
4.4.6 KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx ....................................243
4.4.7 KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx ....................................244
4.4.8 KX-TDA30 PSMPR Software File Version 1.1xxx ........................................................245
4.4.9 KX-TDA30 PSMPR Software File Version 2.0xxx ........................................................246
4.4.10 KX-TDA30 PSMPR Software File Version 2.2xxx ........................................................247
4.4.11 KX-TDA30 PSMPR Software File Version 3.0xxx ........................................................248
4.4.12 KX-TDA30 PSMPR Software File Version 4.0xxx ........................................................249
4.4.13 KX-TDA30 PSMPR Software File Version 5.0xxx ........................................................250
Index............................................................................................................251
User Manual 15
Table of Contents

16 User Manual
Table of Contents

Section 1
Operation
This chapter shows you step by step how to use each
feature. Read this chapter to become familiar with the
many useful features of this PBX.
User Manual 17

1.1 Before Operating the Telephones
1.1.1 Before Operating the Telephones
What Kind of Telephone Can Be Used?
You can use a Panasonic IP Proprietary Telephone (IP-PT) (e.g., KX-NT346 or KX-NT366) and a single line
telephone (SLT), such as a rotary pulse telephone or a Panasonic proprietary telephone (PT) such as the
KX-T7636 or KX-DT346. You can also use a Panasonic Portable Station (PS) such as the KX-TCA255 or
KX-TD7690. Use the feature depending on the telephone you are using. If you are using a Panasonic
proprietary telephone with a special feature button such as
REDIAL
or a display (Display PT) or both, you can
follow the operation with the button or display messages for easy programming.
If you use a large display telephone (e.g., KX-NT346 or KX-T7636), you can follow the displayed messages
to use the features. If your telephone does not have feature buttons and/or a display, you may operate the
PBX by entering a feature number instead. Follow the operation for your type of telephone. If you use a Console,
you can use the buttons on the Console as the buttons on the connected proprietary telephone.
•If you use a Panasonic proprietary
telephone which does not have
feature buttons, you may change
one of the unused flexible buttons
to a feature button. Refer
to "3.1.3 Customising the But-
tons".
Registration for Your Portable Station (PS)
Your PS must be registered with the PBX and assigned an extension number before initial use, through system
programming. To confirm the extension number of your PS, refer to "Your extension information" in
Section "3.1.2 Settings on the Programming Mode".
Feature Numbers
To use certain features, you need to enter specified feature numbers (and an additional parameter, if required).
There are two types of feature numbers as follows:
•Flexible feature number
•Fixed feature number
Fixed feature numbers cannot be changed. However, you can change the flexible numbers to other numbers
for easier use. In this manual, the default numbers (factory installed) are used for operations.
A flexible number is shown as (half-shaded key). Use the new programmed number if you have changed
the feature number. Write the new number in "4.2.1 Feature Number Table" (Appendix).
Notice
The default value of a flexible feature number may vary depending on country/area.
If you use a single line telephone which does not have the " " or "#" keys;
it is not possible to access features that have " " or "#" in their feature numbers.
18 User Manual
1.1.1 Before Operating the Telephones

Tone
You will hear various tones, during or after an operation, for confirmation. Refer to "4.3.1 What is This
Tone?" (Appendix).
Display
In this manual, you will see "the display …". This refers to the display of a Panasonic proprietary telephone. If
your telephone is not a Panasonic display proprietary telephone, the message will not be displayed. If you use
a Panasonic display proprietary telephone, the display helps you confirm the settings. Some proprietary
telephones also give you easy access to features. A message is displayed depending on the feature. By
pressing the corresponding button on the side or at the bottom of the display, or pressing the Navigator Key,
you can access the desired feature. Furthermore, depending on the display proprietary telephone, you can
operate features or make calls using the display message. Refer to "1.13 Using a Display Proprietary
Telephone".
Notice
In this manual, the display messages are described in English.
Your Extension Number
If you use a Panasonic display proprietary telephone, you can check your own extension number on the display.
Press the TRANSFER button or Soft (S1) button while on-hook.
Using a Navigator Key/Jog Dial/Volume Key
The Navigator Key can be used for the display contrast and the volume control or you can search for desired
items on the display. Press the Navigator Key/Volume Key or rotate the Jog Dial in the desired direction.
The contrast or the volume level and the items will change as follows:
Navigator Key Jog Dial Volume Key
Up
(Level increases)
Down
(Level decreases)
RightLeft
ENTER
Left
(anti-clockwise)
Level decreases
Right
(clockwise)
Level increases
Up
(Level increases)
Down
(Level decreases)
Examples
The displays and the illustrations shown as examples are from a telephone connected to the KX-TDA200.
Restrictions
Some features may be restricted at your extension depending on system programming and the type of
telephone being used.
User Manual 19
1.1.1 Before Operating the Telephones

Icon Descriptions
The following icons show you the feature availability, notes and action to use the features.
This feature cannot be used with a
single line telephone.
outside line
group no.
OR
/
8
9
0
OR
(CO)
Seize an outside line (One of
the following).
•Press the CO button.
•Dial automatic line access
number 0 or 9.
•Dial outside line group ac-
cess number and outside
line group number.
See "Programming" for Related Pro-
gramming if necessary.
Off-hook (One of the following).
•Lift the handset.
•Press the SP-PHONE button.
•Press the MONITOR button. (To
start talking, lift the handset.)
•Press TALK button.
Press the Call button on the
Doorphone.
On-hook (One of the following).
•Hang up.
•Press the SP-PHONE button.
•Press the MONITOR button.
•Press CANCEL button.
Press the hookswitch lightly.
Press the corresponding feature but-
ton on the proprietary telephone.
Talk.
desired no.
Enter the required number.
<Example>
account code
Enter the account code.
You will hear a busy, confirma-
tion, dial, ring or ringback tone.
B. Tone: Busy Tone
C. Tone: Confirmation Tone
D. Tone: Dial Tone
R. Tone: Ring Tone
R. B. Tone: Ringback Tone
extension no.
Dial an extension number.
outside
phone no.
Dial outside phone number.
phone no.
Dial the telephone number.
dial key
Press any dial key (0–9, , #).
20 User Manual
1.1.1 Before Operating the Telephones