Iii:(,I4 :f:I,' I_,11<"[=ilii ll_ll ;t l,t [,liI
The Universal Remote Control can be programmed to operate many manufacturers' components,
using the component function buttons for CABLE, DBS, VCR, or DVD. Follow the procedures for
programming your Remote Control with or without codes for the component.
Determine the manufacturer of the component and look in the table for the code.
Confirm that the external component is plugged in and on.
Turn the component off.
Press the ACTION and POWER button, together, for at least 5 seconds.
Press appropriate component button on the Remote Control (VCR, DBS/CBL, or DVD).
Enter the 34igit component code using the Remote Control numedc keypad (0 - 9 buttons).
Press the Remote Control POWER button to test the component, if the procedure was
successful, the component will turn on.
Helpful Hints: Unsuccessful Code
If the component does not operate with the
Remote Control, repeat the procedure using
another code. (Some brands have multiple codes.)
if an incorrect code is entered, or if the procedure
takes longer than 30 seconds, the programming
will fail.
i_ _ii'llll'f _l'_,li rj#_,llv/llI/ll;l IIB._/t,'_lgZZ//_ _4¢tl _[iig/!
El Control Remoto Universal puede programarse para operar componentes de varios fabricantes
usando los botones de funci6n para VCR, DBS/CBL o DVD. Siga los procedimientos para
programar su Control Remoto con o sin c6digo para el componente.
Determine el fabricante del componente y busque en la tabla su c6digo.
Confirme que el componente est# conectado yen operaci6n.
Apague el componente.
Presione los botones ACTION (Acci6n) y POWER (Encendido), juntos, cuando menos
por 5 segundos.
Presione el boton de la funci6n apropiada del componente en el Control Remoto (VCR,
DBS/CBL o DVD).
Ponga el codigo del componente de 3 digitos usando el teclado numerico (botones 0 -9)
del Control Remoto.
Presione el bot6n POWER de el Control Remoto para probar el componente. Si este
procedimiento ha sido exitoso, el componente se encender&
Consejes Utiles: C6digo sin _xito
Si el componente no opera con el ControlRemoto,
repita el procedimiento usando otro c6digo.
I(Algunas marcas tienen mOItiplescodigos.) Si se
ha introducido un codigo incorrecto, o si el
procedimiento toma m#s de 30 segundos, la
programaci6n hafracasado.
li#tlllffrill ii !11ill lll/|ililrlliii! i iii#illllllflll i11ill ll¥i]li
La t_lOcommande multimarque peat _tre prograrnrnOe pour commander le._)nctionnement d'appareil.s d'autr,,s
marques h l'aide des touches de [bnctions VCR, DBS/CBL ou DVD. Suivre l'une des proc&hlres de
programmation donnOes ci-dessous.
]Voter la marque de l'appareil et identifier le coda dans le tableau des codes.
Fdll_[_'gIwi
S'assurer que l'appareil amciliaire est branch,; et que le gontact est t;tabli.
Couper l¢ contact sur I'appareil atLviliaire.
Appuver simultanbment sur les touches ACTION et POWER pendant au morns 5secondes.
Appuyer vur la touche de la t_lOcommande correspondant D l'appareil auviliaire utili.s_;(VCR,
DBS('BL ou DVD).
Emrer le c_Jtlch 3 c'hif]i'esd l'aide des touches itttm_;riqlle_dtl clavier de la t_;l(;_ommandc
(tottLhe_ 0 _9).
4ppio'er sur la toit_he POWER tie ta tOl&'ommande pour v_;q[ier le /tmuio#ttleml,ttt Si le h<.t _.ILL'
d_tOentr{, h"contact est Otabli sur I'appareil
Conseil pratique: Entr& d'un mauvais code [
Si l_" umta(I tit" petit lrtw _;tahli vttp l'ltt_lmn'tl lne_ hi
colh! (Certuine% marqul'_ llm lL'dOtt [_lu% d'ttn (oih >.) Si
tttl mazwlli_ tone _>_I e/tt/'_; ou qiw /'enlr_;t" prc/itte plzl_
de 30 secondes, la progmmnlatio## #l "zn#-a pat lieu.
-9-