Panasonic KX-T7350 User manual

Panasonic
Analog Proprietary Telephones
for Advanced Hybrid System
Operating Instructions
KX-T7320
KX-T7335
Model KX-T7350
Contents
Accessories.2
Getting Started.3
Connection.3
Adjusting rear panel controls.3
Location of Controls.4
Features List for KX-TA624.5
Making Calls. 5
During a Conversation.5
Useful Features.6
Station Programming for KX-TA624 .8
Features List for KX-TA1232.9
Making Calls.9
During a Conversation.9
Useful Features. 10
Station Programming for KX-TA1232. 12
Wall Mounting.13
Important Safety Instructions.14
FCC and Other Information. 1 5
Please read this manual before using the Analog Proprietary Telephone.

Thank you for purchasing a Panasonic Telephone.
Accessories
When unpacking, check the following items.
Handset .one
Telephone line cord.one
Handset cord .one
Overlay.one (KX-T7335 only)
Card holder with memory station card one (KX-T7320, KX-T7335 only)
When you ship the product
Carefully pack and send it prepaid, adequately insured and preferably in the
original carton. Attach a postage-paid letter, detailing the symptom to the outside
of the carton.
DO NOT send the product to the Executive or Regional Sales offices. They are
NOT equipped to make repairs.
Product service
Panasonic Servicenters for this product are listed in the servicenter directory.
Consult your authorized Panasonic dealer for detailed instructions.
- For your future reference -
SERIAL NO.- DATE OF PURCHASE
(found on the bottom of the unit)
NAME OF DEALER __
DEALER’S ADDRESS_
2

Getting Started
I Connection
1 Adjusting rear panel controls
RINGER Volume Selector: HANDSET/HEADSET Selector:
Set the ringing volume. Set to “HANDSET”.
(OFF/LOW/HIGH) (KX-T7335 only)
BACK LIGHT Control Selector:
Adjust the BACK LIGHT Control Selector lever
to the desired setting. (OFF/LOW/HIGH)
(KX-T7335 only)
3

Location of Controls
* The illustration used in this page is a KX-T7335.
O LCD (Liquid Crystal Display)
(KX-T7335 only)
© AUTO ANS (Auto Answer)/MUTE:
AUTO ANS is used to answer an intercom
call automatically. MUTE is used to listen
to the other party without them hearing you
in the handsfree conversation mode.
VOICE CALL (KX-T7350 only):
Used to receive an intercom call and to
listen to the other party without them
hearing you in the handsfree mode.
© INTERCOM:
Used to make or receive an intercom call.
© PROGRAM:
Used to enter and exit the programming
mode.
© PAUSE (in programming):
Inserts a pause between the access number
and the phone number. PAUSE button works
when you release the PAUSE button.
© REDIAL (ordinarily):
Redials the last number dialed.
© Flexible Outside (CO) Line Buttons:
Used to make or receive an outside call, or
access a feature if the button is assigned as
Programmable Feature button.
© AUTO/STORE
Used for speed dialing in the system or
storing program changes.
© MESSAGE:
Used to send a message or display a
current message.
© TRANSFER:
Used to transfer a call to another party.
© Volume Control Button:
Used to adjust the volume.
© FLASH:
Used to disconnect or send a flash signal.
© SP-PHONE:
Used for the handsfree operation.
MONITOR (KX-T7350 only):
Used for a handsfree dialing operation.
© HOLD:
Used to place a call on hold.
4

Feature List for KX-TA624
am) Outside (CO) Line button Off-hook On-hook ( ) Feature number Talk
* “Location of Controls” is shown on page 4.
Some feature access numbers may be different. Consult with your dealer for more details.
Desired Function Operation
Making Calls I
Calling
To an extension j To an external party
^ ► | e xtension no. ) ► ^ j ^ ► ( 9 )/ g- ) ► | phone no. ) ► ^
Redial
REDIAL
% ► o f ts
One-Touch
Dialing
To dial
^ co assigned as a One-Touch . (p /•
► 0Z3 - Dialing button ► (£((4
Calling an
operator
Speed Dialing
(Personal)
To set
► (30 (30 ^ (P ersonal speed dial no. (0-9) ] ► [ d esired no.) ► ("IT) ►
To dial
► f"5T) ► [ personal speed dial no. (0-9) ) ►
Speed Dialing
(System)
To dial
► O ► [system speed dial no. j ^ jr^
Doorphone Call
% ► CD CD ► 1 d oorphone n°- ] ► (^<4
Automatic
Callback Busy
To set ; To cancel
While hearing a busy tone 1
|
To answer the extension ; To answer the outside (CO) line
^ ► C(i4 : ^ ► (p hone no -J ► f(<4
During a Conversation j
Holding a call
Holding ; To retrieve a call at the holding extension
HOLD 1 ~
CD* 6 ? 5 i ^ ► to/a=D ► &&
To retrieve an outside call from another extension
^ ► o=d ► &£
Holding a call
exclusively
Holding ; To retrieve a call on exclusive hold
HOLD HOLD rft
00°T» i (£,4
Transferring
a call
c=5 ► b — 7 =L^ ► C«4 ► ^
( i ) 1 phone no. J to an external party
5

Feature List for KX-TA624
Desired Function
Three-party
conference
Forwarding
a call and
Do Not Disturb
(DND)
Picking up
a call
Call Waiting
Setting Absent
Message
Operation
During a Conversation
To add a third party
co_ assigned as a CONF
assigned as a
CUD- (Conference) button *1 ► [party's no. | ► (£«* ► CEZD - CONF (Conference)
To talk to one party by terminating the other J To leave a conference
q )/ a=D : ^
Useful Features
► CD CD ] ►
assigned
n- a s a
u - } FWD/DND
D o Not Disturb (DND)
G>®
Forwarding a call
All calls_
C 1 ) ► [extension no,] ► ®
Busy / N o answer
( 2 ) ► [extension no >®
To an outside line
G>(l ine accsess code ]
► f phone no.l^ ftP)
Follow Me vJ KJ
(~5~3 ► [ your extension no. ] ► (~5~3
Canc el Follow Me _
( 8 ) ► [ your extension no. ] ► ( tQ
C ancel
d>®
Directed
(_4 3 ► [extension no.]
Grou p
CD®
rrpmm outside (co)
line calls
^ ^ r7Drr^roD Intercom and
J J doorphone calls
To talk to the new party
While hearing a tone
CO / INTERCOM IP /’
a=z> / a=D ► Wi
CD® Set
®® Cancel
►
► CD ® ► ( m e T-l) no 'H CSI ► ® ► °f*
To cancel
^ ► CD ® ® ® ►
* 1 If CO button is not assigned, you can press Volume control button (~) while
pressing PAUSE button.
* 2 If CO button is not assigned, you can press Volume control button (/-.) while
pressing PAUSE button.
6

Desired Function
Operation
Useful Features
Paging
To page
All groups & external speakers
®©©
All gro ups
©CD®
Specific groups
f~3~X 3 ) [ paging group no. ]
External speaker
®©
To answer
^ ► : © ©
►
To deny
^ ►
©®©®® S et
L®®©®® Cancel
►
► ^
Sender
Message
Waiting
Receiver
To leave a notification
When the called extension is busy or does not answer
MESSAGE ^ ,--
n—> ►
To cancel a notification
gs _ ( MESSAGE MESSAGE .
► [ extension no. ] ► (I ) (I ) ►
To call back
To clear all notifications
Log-ln/Log-Out
^ ►
'®©©®® For Log-In
.©©©®® For Log-Out
► Sf®
Locking your
extension
4^> ►
CDm ,ockcode lock code flP) Lock
KJLJ (0000-9999) (same code) L0CK
C7~) C 7 ~)(lock code (0000-9999) ) (IT) Unlock
Clearing the
Feature Settings
^ ► ® ® ®
Timed
Reminder
To set
^ ► ® © ^
hour
minute
(~0~) AM
r
(01-12)
(00-59)
! ►
(T) PM
►
I one
' time
To cancel
®©®®^®^
.CD® daily J
To stop the alarm
► 6|Q
7

Station Programming for KX-TA624
To enter the programming mode
To exit the programming mode
^PROGRAM^
^PROGRAM^
Operation
Direct Station
Selection
fa^orrkcs
CONF
(Conference)
CO f —r-\ „ AUTO/STORE
CEZD ► CD ► 0=)
One-touch
Dialing
a=z> ► G DI des n " ed ] ► 0=5'
Log-In/
Log-Out
Q > ► (8 j ► n—)
FWD/DND
rf—> ► (T) ► afz)
SAVE
0 > ► ( 5 ) ► n—>
Caller ID
Indication
- Common
a±z> ► CD CD ► <x=o
Caller ID
Indication
- Personal
Q > ► ( 6 ) ► n—)
Caller ID
Selection
- Common
a=3 ► CD> CD ► a==5
Caller ID
Selection
- Personal
0 ) ► ( 7 ) ► n—>
Preferred Line Assignment,
Outgoing
S~~. N /•—--\ AUTO/STORE
C 1 J C 1 j ► a ) no line
C 1 J l 2 J ► C1 ) idle line
Preferred Line Assignment,
Incoming
CD CD ► U _ ) no line
CD CD ► a=5 ringing line
Intercom Alert Assignment
f m "\ f 1 ‘N ^ AUTO/STORE
C 4 J C 1 J ► Cl- ) ring calling
Z' I \ / -7 \ . AUTO/STORE
(4 ) ( 2 ) ► n - ) voice callina
Call Waiting Tone Type Assignment
( 5 ) ( 1 ) ► n-) tone 1
rZ. \ \ b. AUTO/STORE , _
(.5 ) C 2 J ► n- ) tone 2
Station Programming Data
Default Set *
r~Zr\ f w A ^ AUTO/STORE
CDUD^ azz>
If you press PROGRAM button during on-hook, the proprietary telephone goes to
the program mode. And if you press it again during program mode, the proprietary
telephone returns to on-hook condition. (It operates like an alternate switch.)
AUTO indicator lights on during Program mode.
* Note: This only default clears assignments not using a CO button.
8

Feature List for KX-TA1232
Desired Function Operation
Making Calls
Calling
To an extension | To an external party
► (extension no. ] ► (j^ ! ^ ► g- > ► ( p hone no.
Redial
REDIAL
^ ► o f es
One-Touch
Dialing
To dial
$s. . co_ assigned as a One-Touch ^ (P /•
► U__D Dialing button ^ (Sj((«e
Calling an
operator
0
▼
rV>
Speed Dialing
(Personal)
To set
► C~3^) (T) ► [ personal speed dial no. (0-9) ] ► [ d esired no.) ► ftT) ►
To dial
► (personal speed dial no. (0-9)] ►
Speed Dialing
(System)
To dial
AUTO/STORE / \ fi) /
► (\ ) ^ [system speed dial no. )
Doorphone Call
^ ► C 3 )( 1 ) ► ( doorphone no. (1-4) ) ►
Automatic
Callback Busy
To set ; To cancel
While hearing a busy tone 1
! ^ ► G DQE> e 5 9
To answer the extension ; To answer the outside (CO) line
^ ► C«£ ; ^ ► lP hone no l ► C('£
During a Conversation
Holding a call
Holding | To retrieve a call at the holding extension
O* 6 ? 5 I ^ ► O HD/aZD C^
To retrieve an outside call from another extension
^ ► o => ► £ &
Holding a call
exclusively
Holding ; To retrieve a call on exclusive hold
HOLD HOLD ^
OO 6 * 5 : ^ ► f a/a=D* C«<;
Transferring
a call
transfer ( e xtension no. ) to an extension ^
CZD ► co , -, ► ((l:$ ► ®* S
(i ) [ phone no. ] to an external party ^
Three-party
conference
To add a third party
co- assigned as a CONF third ' (P /• . co _ N
C -(Conference) button * ^ party’s no. ^ ^ CJ -)—CONF (Conference)
^ — - button *
To talk to one party by terminating the other ; To leave a conference
(l )/ n—) ; ^
If CO button is not assigned, you can press Volume control button (~) while
pressing PAUSE button. g

Feature List for KX-TA1232
■
Forwarding
a call and
Do Not Disturb
(DND)
Picking up
a call
Call Waiting
Setting Absent
Message
Operatio
Useful Features
^ ► [ CDCDCD
assigned
£9-- as a
u -' FWD/DND
button *
D o Not Disturb (DND)
CD
Forwarding a call
["All calls_
( 2 ) ► [ e xtension no.]
Busy
Q 3 ^ ► (extension no. ]
No an swer_
Q 4 ^ ► [extension no.]
Busy / N o answer
( 5 ^ ► (extension no.]
To an o u tside line _
( 6 ) ► ( Line accsess code ]
► [ phone no.] ^ (tT)
Follow Me
<ZM your extension no. ]
Cancel Follow Me
( 8 ) ► ( y our extension no.]
Directed
( 4)( O ► (extension no.]
Grou p
®®
Outs id e lin e
®®
[®®®® Set
L®®®® Cancel J *
To talk to the new party
While hearing a tone
a=) / a=> ►
To set _ _
^ ► CD CD CD ► [ mes (i- g 9> n o - H Sed) 1 ► ^
To cancel
^ ► CD CD® GD ► ^
If CO button is not assigned, you can press Volume control button (~) while
pressing PAUSE button.
10

Paging
To page
All gr o ups & exte rnal speakers
CD®®/®®®
All gr oups
®CD®
Spec ifi c gro up_
[ paging group no. ]
All ex t ernal s peak ers
CD CD®
Spec ifi c ext e rnal speaker _
( 3 )( 2 ) [ external speaker no7)
► ^
Message
Waiting
Throu g h a te lephone speaker
®®
Throu g h an e x ternal speaker _
[ 4 )( 2 ) [ external speaker no?
^ I ® ® ® ® Set | ^
^ 1 ® ® ®® Cancel ' *
To leave a notification
When the called extension is busy or does not answer
Sender (J - ) ^
To cancel a notification
^ ► ® ® ® K extension no. ] ►
To call back
To clear all notifications
Log-ln/Log-Out
Receiver j %^CD®® ► | e x £ s ‘ on |
^ * [ ®®® ForL °g- |n 1. ffEQ
( 4 0 ) For Log-Out_ *
Electronic
Station Lockout
Station Program
Clear
lock code lock code
(000-999) JI (same code)
Cn C ni lock code (000-999)
► Q ®® ► G ^>
► sis
Timed
Reminder
^ ► ® ® ® ► ,0 h 1°-12> ^00-59)
J® AM ]J®
L® p m J l® daily J *
To stop the alarm
11

Station Programming for KX-TA1232
To enter the programming mode
To exit the programming mode
PROGRAM
► CD CD
( )
PROGRAM
or
PAUSE
< )
or
^_
Operation
Direct Station
Selection
8—> ► CT) [ e x “] ► fP I22 >
CONF
(Conference)
fa»CDd>ra
One-touch
Dialing
OZZ) ► C D! de no ed ] ► A rP^ E
Log-In/
Log-Out
CEZD ► CD CD
FWD/DND rf —, ► CD ► a=D
SAVE
00_ A ~ \ . AUTO/STORE
CI > ► ( 5 J ► n —)
Caller ID
Indication
- Common
Cl ) ► ( 9 ) ( 6 ) ► a ->
Caller ID
Indication
- Personal
QZ3K 9 X 4 J ► n -)
Caller ID
Selection
- Common
a > ► ( 9 ) ( 7 ) ► n—>
Caller ID
Selection
- Personal
00_ A ~ N A ^ \ ^ AUTO/STORE
CCZD ► CD CD ► CIZZ>
Preferred Line Assignment,
Outgoing
Preferred Line Assignment,
Incoming
Intercom Alert Assignment
Call Waiting Tone Type Assignment
Station Programming Data
Default Set *
A “ \ /-:-\ A UTO/STOR E
C 1 J C 1 J ► q-) no line
[ 1 j l 2 j ► Cl ) idle line
l 2 j C 1 J ► Cl ) no line
C~2~) (IQ ► CEZD rin 9 i n 9 'ine
CO CD ► CEZD rin 9 calling
CD CD ► CEZZ) voice calling
A _ A A I \ . AUTO/STORE
( 5 ) ( 1 J ► n-) tone 1
C 5 ) C 2 ) ► n-) tone 2
® A UTO/STOR E
► a =d
* Note: This only default clears assignments not using a CO button.
12

Wall Mounting

Important Safety Instructions
When using your telephone equipment, basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and
injury to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions
marked on the product.
3. Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4. Do not use this product near water, for
example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool.
5. Do not place this product on an
unstable cart, stand, or table. The
product may fall, causing serious
damage to the product.
6. Slots and openings in the cabinet and
the back or bottom are provided for
ventilation, to protect it from
overheating, these openings must not
be blocked or covered. The openings
should never be blocked by placing the
product on the bed, sofa, rug, or other
similar surface. This product should
never be placed near or over a radiator
or heat register. This product should
not be placed in a built-in installation
unless proper ventilation is provided.
7. Do not allow anything to rest on the
telephone cord. Do not locate this
product where the cord will be abused
by persons walking on it.
8. Do not overload wall outlets and
extension cord as this can result in
the risk of fire or electric shock.
9. Never push objects of any kind into this
product through cabinet slots as they
may touch dangerous voltage points or
short out parts that could result in a risk
of fire or electric shock. Never spill
liquid of any kind on the product.
10. To reduce the risk of electric shock, do
not disassemble this product, but take
it to a qualified serviceman when some
service or repair work is required.
Opening or removing covers may
expose you to dangerous voltages or
other risks. Incorrect reassembly can
cause electric shock when the
appliance is subsequently used.
11. Unplug this product from the wall
outlet and refer servicing to qualified
service personnel under the following
conditions:
A. When the power supply cord or
plug is damaged or frayed.
B. If liquid has been spilled into the
product.
C. If the product has been exposed to
rain or water.
D. If the product does not operate
normally by following the operating
instructions. Adjust only those
controls, that are covered by the
operating instructions because
improper adjustment of other
controls may result in damage and
will often require extensive work
by a qualified technician to restore
the product to normal operation.
E. If the product has been dropped or
the cabinet has been damaged.
F. If the product exhibits a distinct
change in performance.
12. Avoid using a telephone (other than a
cordless type) during an electrical
storm. There may be a remote risk of
electric shock from lightning.
13. Do not use the telephone to report a
gas leak in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
14

FCC and Other Information
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF
MOISTURE.
CAUTION:
To assure continued compliance with FCC
rules, do not make any unauthorized
modifications. When programming
emergency numbers and/or making test
calls to emergency numbers:
1) Remain on the line and briefly
explain to the dispatcher the reason
for the call before hanging up.
2) Perform such activities in the off-
peak hours, such as early morning
hours or late evenings.
If there is any trouble, disconnect the unit
from the extension line and connect a
known working phone. If the known
working phone operates properly, have it
repaired by one of the specified Panasonic
Factory Service Centers. If the known
working phone does not operate properly,
check the Electronic Modular Switching
System and the internal extension wiring.
• Keep the unit away form heating
appliances and electrical noise
generating devices such as fluorescent
lamps and motors.
• The unit should be kept free of dust,
moisture and vibration, and should not be
exposed to direct sunlight.
• Do not use benzine, thinner, or the like,
or any abrasive powder to clean the
cabinet. Wipe it with a soft cloth.
• Do not use any handset other than
Panasonic handset.
This telephone provides magnetic
coupling for hearing aids.
15

Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way, Secaucus,
New Jersey 07094
www. Panasonic, com
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of
Puerto Rico, Inc.
Ave. 65 de Infanteria, Km. 9.5,
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Copyright:
This manual is copyrighted by Kyushu Matsushita Electric Co., Ltd. (KME).
Under the applicable copyright laws, this manual may not be reproduced in any
form, in whole or part, without the prior written consent of KME and its licensee.
© 2001 Kyushu Matsushita Electric Co., Ltd. All Rights Reserved.
Printed in USA
PSQX2574YA KK0801ES191