Panasonic TGP600 User manual

QUICK REFERENCE GUIDE
Panasonic TGP-600
Handset Functions
1 Ringer/Charge/Message Indicator
Light Pattern Meaning
Steady On Charging
Slow Flash New missed call or voicemail
Quick Flash Receiving a call
Off Fully charged or the handset is not
connected to the charger
2 Headset Jack – headsets can be used with the unit.
Not all operations with the headset can be guaranteed.
3 Talk/Speakerphone Key – Used to make or answer
calls, or toggle between Receiver mode and Hands-
free mode during a conversation.
4 Navigator Key
Left Display incoming call log
Up Adjust ringer volume
Right Open the phonebook
Down Display outgoing call log
Center Display menu
5 Hold/Msg Key – During talking, used to place a call on Hold.
In standby mode, used to retrieve a call on hold if there is
one, or used to access your voice mailbox if no call is on hold
6 Silent Mode – Used to turn Silent Mode on or off when
pressed for more than 2 seconds in standby mode
7 LINE Key – Used to conrm the line status or to seize a line
8 Receiver
9 Display
10 Soft Keys – A / B / C these keys are used to select the item
displayed on the bottom line of the display
11 Power/Cancel Key – Used to end calls, exit the phonebook or
Function mode. Press and hold this key to turn the handset
on or off
12 Xfer/Clr Key – Used to transfer a call to another party or to
clear digits or characters
13 FUNC Key – Pressing this key followed by a keypad number
(0- allows you to perform various common functions quickly
14 Microphone
15 Charge Contacts
16 Strap holes – Used to attach phone straps and similar items
17 Speaker
1 8
9
10
11
12
13
14
15
3
4
5
6
7
17
16
Front
Back
2

Quick Reference Guide
Panasonic TGP-600
2
1
2
3
4
5
6
Display
1 Pictograph
2 Handset Status
3 Time Display
4 Date, New Message or
Missed Call Display
5 Handset / Desk phone
Number and Name
6 Soft Keys
Signal Strength Indicator
- Strong
Battery Indicator
- Full
Signal Strength Indicator
- Medium
Battery Indicator -
Medium
Signal Strength Indicator
- Weak
Battery Indicator
- Low
Signal Strength Indicator
- Very weak
Battery Indicator -
Very Low
Signal Strength Indicator
- Out of range
Battery Indicator -
Charge needed
Off-hook Status Incoming Call Log
Intercom Indicator Outgoing Call Log
Voice Message Phonebook
Navigator Key Guidance
Making Calls
1. Enter a number to call,
Press
2. Predial: Or Press
, Enter the number and
press
Making an Intercom Call
Intercom calls can be made between
compatible handsets / desk phones:
1. select menu
2. select the Intercom
softkey
3. Up / down to select a
desired handset/desk
phone
4. Press
5. end the call
Answering Calls
1.
Note: when receiving an intercom
call, the Handset name is displayed
on the LCD
REJECTING AN INCOMING CALL
1. While an incoming call is
ringing, press
2. The call will be rejected
and the handset will return
to standby mode
Ending Calls
1. end the call
Call Hold and resume
HOLD A CURRENT CALL
1. Press [HOLD/MSG] key
Note: if you select a LINE key other
than the one for the current call, the
current call is automatically put on
Hold
RETRIEVE A CALL ON HOLD
1. Press the [HOLD/MSG] key
Conference Call
During a conversation, you can
add additional people to establish a
conference call:
1. Press the [FUNC] key and
press 5 (“Conference”)
2. You will hear two beeps
from the handset
3. Dial the party you want to
add to the conversation and
press the key
4. Press the key
ENDING A CONFERENCE CALL
1. end the call
Call Transfer
During a conversation you can
transfer a call to another destination:
1. Press [XFER/CLR]
2. Dial the party, press
3. Wait until the other party
answers to announce the
transfer
4. Press to complete the
transfer
Note: To return to the call before the
transfer destination answers, press
Listening to Voicemail
When you receive a voice message,
“Voice MSG” is displayed and
will appear
In Standby mode:
1. Press and hold down the
[HOLD/MSG] key
2. You will hear the Voice
Portal, enter your pass
code to proceed