Panduit AT-HDVS-150-TX-WP User manual

Atlona Manuals
Extenders
AT-HDVS-150-TX-WP
AT-HDVS-150-TX-WP-UK
Wall Plate Switcher for HDMI and VGA
Two-Input
with HDBaseT™Output

AT-HDVS-150-TX-WP 2
Version Release Date Notes
2 05/17 Updated to new manual format
Version Information

AT-HDVS-150-TX-WP 3
©2018 Atlona, Inc. All Rights Reserved. All trademarks are the property of their respective owners.
Atlona reserves the right to make changes to the hardware, packaging, and documentation without notice.
Thank you for purchasing this Atlona product. We hope you enjoy it and will take an extra few moments to register
your new purchase.
Registration only takes a few minutes and protects this product against theft or loss. In addition, you will receive
notications of product updates and rmware. Atlona product registration is voluntary and failure to register will not
aect the product warranty.
To register your product, go to http://www.atlona.com/registration
As of this writing, there are no rmware updates for this product. When new rmware is released, update instructions
will be included with the rmware and will be appended to this manual.
Sales, Marketing, and Customer Support
Welcome to Atlona!
Operating Notes
IMPORTANT: Visit http://www.atlona.com/product/AT-HDVS-150-TX-WP for the latest rmware
updates and User Manual.
Main Oce
Atlona Incorporated
70 Daggett Drive
San Jose, CA 95134
United States
Oce: +1.877.536.3976 (US Toll-free)
Oce: +1.408.962.0515 (US/International)
Sales and Customer Service Hours
Monday - Friday: 6:00 a.m. - 4:30 p.m. (PST)
http://www.atlona.com/
International Headquarters
Atlona International AG
Ringstrasse 15a
8600 Dübendorf
Switzerland
Oce: [phone]
Sales and Customer Service Hours
Monday - Friday: 09:00 - 17:00 (UTC +1)

AT-HDVS-150-TX-WP 4
Atlona, Inc. (“Atlona”) Limited Product Warranty
Coverage
Atlona warrants its products will substantially perform to their published specications and will be free from defects
in materials and workmanship under normal use, conditions and service.
Under its Limited Product Warranty, Atlona, at its sole discretion, will either:
• repair or facilitate the repair of defective products within a reasonable period of time, restore products to their
proper operating condition and return defective products free of any charge for necessary parts, labor and
shipping.
OR
• replace and return, free of charge, any defective products with direct replacement or with similar products
deemed by Atlona to perform substantially the same function as the original products.
OR
• refund the pro-rated value based on the remaining term of the warranty period, not to exceed MSRP, in cases
where products are beyond repair and/or no direct or substantially similar replacement products exist.
Repair, replacement or refund of Atlona products is the purchaser’s exclusive remedy and Atlona liability does not
extend to any other damages, incidental, consequential or otherwise.
This Limited Product Warranty extends to the original end-user purchaser of Atlona products and is non-transferrable
to any subsequent purchaser(s) or owner(s) of these products.
Coverage Periods
Atlona Limited Product Warranty Period begins on the date of purchase by the end-purchaser. The date contained on
the end-purchaser ‘s sales or delivery receipt is the proof purchase date.
Limited Product Warranty Terms – New Products
• 10 years from proof of purchase date for hardware/electronics products purchased on or after June 1, 2013.
• 3 years from proof of purchase date for hardware/electronics products purchased before June 1, 2013.
• Lifetime Limited Product Warranty for all cable products.
Limited Product Warranty Terms – Refurbished (B-Stock) Products and Discontinued Products
• 3 years from proof of purchase date for all Refurbished (B-Stock) and Discontinued hardware and electronic
products purchased on or after June 1, 2013.
Remedy
Atlona recommends that end-purchasers contact their authorized Atlona dealer or reseller from whom they
purchased their products. Atlona can also be contacted directly. Visit atlona.com for Atlona’s contact information
and hours of operation. Atlona requires that a dated sales or delivery receipt from an authorized dealer, reseller
or end-purchaser is provided before Atlona extends its warranty services. Additionally, a return merchandise
authorization (RMA) and/or case number, is required to be obtained from Atlona in advance of returns.
Atlona requires that products returned are properly packed, preferably in the original carton, for shipping. Cartons not
bearing a return authorization or case number will be refused. Atlona, at its sole discretion, reserves the right to reject
any products received without advanced authorization. Authorizations can be requested by calling 1-877-536-3976
(US toll free) or 1-408- 962-0515 (US/international) or via Atlona’s website at atlona.com.
Exclusions
This Limited Product Warranty excludes:
• Damage, deterioration or malfunction caused by any alteration, modication, improper use, neglect, improper
packaging or shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of
nature.

AT-HDVS-150-TX-WP 5
• Damage, deterioration or malfunction resulting from the installation or removal of this product from any
installation, any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by
Atlona to make such repairs, or any other cause which does not relate directly to a defect in materials and/or
workmanship of this product.
• Equipment enclosures, cables, power supplies, batteries, LCD displays, and any accessories used in conjunction
with the product(s).
• Products purchased from unauthorized distributors, dealers, resellers, auction websites and similar unauthorized
channels of distribution.
Disclaimers
This Limited Product Warranty does not imply that the electronic components contained within Atlona’s products
will not become obsolete nor does it imply Atlona products or their electronic components will remain compatible
with any other current product, technology or any future products or technologies in which Atlona’s products may
be used in conjunction with. Atlona, at its sole discretion, reserves the right not to extend its warranty oering in
instances arising outside its normal course of business including, but not limited to, damage inicted to its products
from acts of god.
Limitation on Liability
The maximum liability of Atlona under this limited product warranty shall not exceed the original Atlona MSRP for
its products. To the maximum extent permitted by law, Atlona is not responsible for the direct, special, incidental or
consequential damages resulting from any breach of warranty or condition, or under any other legal theory. Some
countries, districts or states do not allow the exclusion or limitation of relief, special, incidental, consequential or
indirect damages, or the limitation of liability to specied amounts, so the above limitations or exclusions may not
apply to you.
Exclusive Remedy
To the maximum extent permitted by law, this limited product warranty and the remedies set forth above are
exclusive and in lieu of all other warranties, remedies and conditions, whether oral or written, express or implied.
To the maximum extent permitted by law, Atlona specically disclaims all implied warranties, including, without
limitation, warranties of merchantability and tness for a particular purpose. If Atlona cannot lawfully disclaim
or exclude implied warranties under applicable law, then all implied warranties covering its products including
warranties of merchantability and tness for a particular purpose, shall provide to its products under applicable law.
If any product to which this limited warranty applies is a “Consumer Product” under the Magnuson-Moss Warranty
Act (15 U.S.C.A. §2301, ET SEQ.) or other applicable law, the foregoing disclaimer of implied warranties shall not
apply, and all implied warranties on its products, including warranties of merchantability and tness for the particular
purpose, shall apply as provided under applicable law.
Other Conditions
Atlona’s Limited Product Warranty oering gives legal rights, and other rights may apply and vary from country to
country or state to state. This limited warranty is void if (i) the label bearing the serial number of products have been
removed or defaced, (ii) products are not purchased from an authorized Atlona dealer or reseller. A comprehensive
list of Atlona’s authorized distributors, dealers and resellers can be found at www.atlona.com.
Atlona, Inc. (“Atlona”) Limited Product Warranty

AT-HDVS-150-TX-WP 6
FCC Statement
FCC Compliance and Advisory Statement: This hardware device complies with
Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)
this device may not cause harmful interference, and 2) this device must accept any
interference received including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions, may cause harmful interference
to radio communications. However there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following
measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the
receiver; 3) connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected;
4) consult the dealer or an experienced radio/TV technician for help. Any changes or modications not expressly
approved by the party responsible for compliance could void the user’s authority to operate the equipment. Where
shielded interface cables have been provided with the product or specied additional components or accessories
elsewhere dened to be used with the installation of the product, they must be used in order to ensure compliance
with FCC regulations.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install or place this product near any heat
sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce
heat.
9. Do not defeat the safety purpose of a polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
product.
11. Only use attachments/accessories specied by
Atlona.
12. To reduce the risk of electric shock and/or damage
to this product, never handle or touch this unit or
power cord if your hands are wet or damp. Do not
expose this product to rain or moisture.
13. Unplug this product during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the product, the product has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
CAUTION: TO REDUCT THE RISK OF
ELECTRIC SHOCK
DO NOT OPEN ENCLOSURE OR EXPOSE
TO RAIN OR MOISTURE.
NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions in the literature
accompanying the product.
The information bubble is intended to alert the user to helpful or optional opera-
tional instructions in the literature accompanying the product.
Important Safety Information

AT-HDVS-150-TX-WP 7
Introduction 8
Features 8
Package Contents 8
Panel Description 9
Installation 10
Connection Instructions 10
Connection Diagram 11
Basic Operation 12
Powering the Display 12
Selecting the Input 12
Auto Switching 13
Passing Analog Audio 13
Appendix 14
Updating the Firmware 14
Specications 16
Index 18
Table of Contents

AT-HDVS-150-TX-WP 8
The Atlona AT-HDVS-150-TX-WP is a 2×1 switcher and HDBaseT transmitter with an HDMI input plus a VGA input
with audio. The HDVS-150-TX-WP features a US two-gang wall plate form factor. Video signals up to 1080p, plus
embedded audio can be transmitted up to 230 feet (70 meters). The HDVS-150-TX-WP is designed for use with the
AT-HDVS-150-RX receiver and HD scaler, and can serve as the central component of a compact, automated AV
system with the convenience of automatic input selection and display control. The switcher is remotely powered by
the HDVS-150-RX through Power over Ethernet (PoE).
1 x AT-HDVS-150-TX-WP
1 x Wall plate covers (US)
4 x US wall plate screws
2 x UK wall plate screws
1 x Installation guide
Introduction
Features
Package Contents
• Extends AV up to 230 feet (70 meters) @ 1080p or 1920×1200.
• Transmits AV up to 230 feet (70 meters) @ 1080p or 130 feet (40 meters) @ 4K/UHD* using CAT6a/7 cable.
• HDMI input plus a VGA input with audio.
• Allows advanced HDMI display devices to be used with legacy VGA sources
• Power for transmitter is supplied by AT-HDVS-150-RX over HDBaseT.
• Shallow, 1.5 inch (40 mm) deep enclosure and recessed RJ-45 connector simplify integration.
• Selects active input when sources are connected or if there is a change in source power status.
• LED indicators provide power and input selection status information
• USB port provides an easy means for device updates.

AT-HDVS-150-TX-WP 9
Panel Description
LINK
HDMI IN
VGA IN AUDIO IN
DISPLAY
ON/OFF
INPUT
SELECT
3
6
7
4
2
15
1 INPUT SELECT
Press this button to switch between HDMI IN and VGA IN port. By default, HDMI IN is selected port. This
button will glow bright blue when the wall plate is powered.
2 DISPLAY ON/OFF
Press this button to power-on the display (connected to the receiver), place it in standby mode, or control a
connected display using the HDBaseT output.
3 LINK
This LED indicator will glow bright amber when a powered link exists between the AT-HDVS-150-TX-WP and a
compatible receiver, such as the AT-HDVS-150-RX.
4 HDMI IN
Connect an HDMI cable from this port to an HD source.
5 AUDIO IN
Connect a 3.5mm mini-stereo audio cable, from an analog audio source, to this port. See Passing Analog Audio
(page 13) for more information.
6 VGA IN
Connect a VGA cable from this port to a VGA source.
7 HDBaseT OUT
Connect an Ethernet cable from this port to a compaibile HDBaseT receiver, such as an AT-HDVS-150-RX.
Front Side (left)

AT-HDVS-150-TX-WP 10
Installation
1. Connect an Ethernet cable, up to 230 feet (70 meters), from the HDBaseT OUT port, on the back of the wall
plate, to an HDBaseT-compatible receiver (not included). Ethernet cables should use EIA/TIA-568B termination.
2. Assemble the AT-HDVS-150-TX-WP to the 2-gang electrical box or mud ring using the included screws.
When installing into an electrical box, the depth of the box must provide at least 40 millimeters of clearance.
• US version
Secure the wall plate with the four (included) shorter screws.
• UK version
Secure the wall plate with the two (included) longer screws.
3. Connect an HDMI cable from the HD source to the HDMI IN port on the wall plate.
4. Connect a VGA cable from a VGA source to the VGA IN port on the wall plate.
5. Connect a 3.5 mm mini-stereo cable from the AUDIO IN port on the switcher to the analog audio source.
This port allows two-channel analog audio to be included when the VGA IN port is selected. Refer to Passing
Analog Audio (page 13) for more information.
No power supply is required for the AT-HDVS-150-TX-WP. This unit will be powered over the Ethernet cable,
from an HDBaseT receiver.
Connection Instructions
NOTE: Although the wall installation of the US and UK version will dier, the following connection
instructions apply to both the AT-HDVS-150-TX-WP and AT-HDVS-150-TX-WP-UK.

AT-HDVS-150-TX-WP 11
Connection Diagram
LINK
HDMI IN
VGA IN AUDIO IN
DISPLAY
ON/OFF
INPUT
SELECT
Desktop PC
USB
USB
HDMI
HDBaseT
VGA
Audio
Laptop
2-gang electrical box
or mud ring Wall cross-section
(US wall plate shown)
Installation
NOTE: Although the wall installation of the US and UK version will dier, the following connection
diagram applies to both the AT-HDVS-150-TX-WP and AT-HDVS-150-TX-WP-UK.

AT-HDVS-150-TX-WP 12
Basic Operation
The INPUT SELECT button uses a bi-color LED to indicate the currently selected input. If power is interrupted to the
wall plate, for any reason, the wall plate will always retain the last selected input. HDMI IN is the default input.
Press the INPUT SELECT button to toggle between HDMI IN and VGA IN. The color of the INPUT SELECT button
will indicate which input is selected.
HDMI IN = blue VGA IN = red
When the AT-HDVS-150-TX-WP is connected to a compatible receiver and display, press the DISPLAY ON/OFF
button to toggle the display’s power state. When connected to a compatible Atlona receiver, the functionality of this
button can be customized. Refer to the receiver’s User Manual for more information.
Powering the Display
LINK
HDMI IN
VGA IN AUDIO IN
DISPLAY
ON/OFF
INPUT
SELECT
LINK
HDMI IN
VGA IN AUDIO IN
DISPLAY
ON/OFF
INPUT
SELECT
LINK
HDMI IN
VGA IN AUDIO IN
DISPLAY
ON/OFF
INPUT
SELECT
LINK
HDMI IN
VGA IN AUDIO IN
DISPLAY
ON/OFF
INPUT
SELECT
Selecting the Input
NOTE: When the display is in the “o” state, the DISPLAY ON/OFF button will glow bright blue.
This functionality is added to assist in locating the wall plate in a darkened room.
NOTE: The following functionality and operation applies to both the AT-HDVS-150-TX-WP and AT-
HDVS-150-TX-WP-UK.
Display powered on Display powered o

AT-HDVS-150-TX-WP 13
Two-channel analog audio can be added to the VGA signal. In order for the audio to be passed to the receiver, an
active VGA source must be connected to the VGA IN port and the port must be selected. Analog audio cannot be
embedded on an HDMI signal or passed without a video signal on the VGA IN port.
1. Connect a VGA source to the VGA IN port on the wall plate.
2. Connect a 3.5 mm mini-stereo cable from the AUDIO IN port to the analog audio source.
3. Make sure the VGA IN port is selected. When the VGA IN port is the active, the INPUT SELECT button will turn
bright red.
The illustration below shows a desktop PC providing both the audio and video source. However, these signals
may be connected to separate sources.
The AT-HDVS-150-TX-WP will automatically switch to the most recently-connected or powered source. For example,
if both an HDMI and VGA source are connected and then the HDMI source is disconnected, the wall plate will
automatically switch to the VGA IN port. The default setting is OFF and can be set using a compatible receiver.
Passing Analog Audio
Auto Switching
IMPORTANT: The AUDIO IN port will pass audio only when both the VGA IN port is selected and
when the VGA IN port is connected to an active VGA source. Audio cannot be passed without
video.
NOTE: Auto-switching is triggered by a Hot-Plug Detect (HPD) event. If HPD is not detected,
then AT-HDVS-150-TX-WP will not switch inputs. VGA does not support HPD.
LINK
HDMI IN
VGA IN AUDIO IN
DISPLAY
ON/OFF
INPUT
SELECT
Desktop PC
USB
USB
Audio
VGA
Basic Operation

AT-HDVS-150-TX-WP 14
Requirements
• AT-HDVS-150-TX-WP-US or AT-HDVS-150-TX-WP-UK
• Firmware le: AT-HDVS-150-TX_[version].bin
• USB Type A to Mini-USB Type B cable
• Computer with USB port
1. Download the latest rmware from the Atlona web site.
2. Remove the AT-HDVS-150-TX-WP from the wall, or other surface, by removing the four screws from the front of
the wall plate.
3. Disconnect the power to the AT-HDVS-150-TX-WP by disconnecting the Ethernet cable from the HDBaseT OUT
port on the AT-HDVS-150-TX-WP.
4. Remove the faceplate from the front of the AT-HDVS-150-TX-WP, by unscrewing the two locking connectors for
the VGA IN port and the locking connector for the HDMI IN port, using a small hex driver or pliers.
Appendix
Updating the Firmware
LINK
HDMI IN
VGA IN AUDIO IN
DISPLAY
ON/OFF
INPUT
SELECT
AT-HDVS-150-TX-WP-UK
NOTE: The following rmware update procedure applies to both the AT-HDVS-150-TX-WP and AT-
HDVS-150-TX-WP-UK.

AT-HDVS-150-TX-WP 15
5. Press and hold the DISPLAY ON/OFF button, while connecting the USB cable from the computer to the mini-
USB port on the AT-HDVS-150-TX-WP.
6. After a few seconds, a folder with the name USB UPDATER, will be displayed. Release the DISPLAY ON/OFF
button.
If the folder is not displayed, open Windows Explorer and locate the drive named USB UPDATER.
7. Delete all les from the USB drive, if any are present.
8. Drag-and-drop the AT-HDVS-150-TX_[version].bin rmware le to the drive.
9. After the le has been copied, disconnect the USB cable from both the computer and the AT-HDVS-150-TX-WP.
10. Reconnect the Ethernet cable to the HDBaseT OUT port on the AT-HDVS-150-TX-WP.
11. The rmware update process is complete.
12. Attach the faceplate then reinstall the AT-HDVS-150-TX-WP.
Appendix
mini-USB port
DISPLAY ON/OFF button

AT-HDVS-150-TX-WP 16
Specications
Appendix
Video
HD/SD 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p,
[email protected]/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz,
720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200,
1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800
1280×768, 1152×768, 1024×768, 800×600, 640×480
Color Space YUV, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0*
Color Depth 8-bit, 10-bit, 12-bit
Audio
Analog In PCM 2Ch
HDMI In / HDBaseT Out PCM 2Ch
Sample Rate 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Bit Rate 24-bit (max.)
Resolution / Distance 4K/UHD - Feet / Meters 1080p - Feet / Meters
HDMI 15 5 30 10
CAT-5e / CAT-6 115 35 197 60
CAT-6a / CAT-7 130 40 230 70
Signal
Bandwidth 10.2 Gbps
HDCP 1.4
Temperature Fahrenheit Celsius
Operating 32 to 122 0 to 50
Storage -4 to 140 -20 to 60
Humidity (RH) 20% to 90%, non-condensing

AT-HDVS-150-TX-WP 17
Appendix
Power
Consumption 18.7 W (when paired)
Dimensions Inches Millimeters
Wall, 2-gang 1.5 40
Weight Pounds Kilograms
Device 0.82 0.37
Certication
Unit CE, FCC
*4096x2160 @ 50/60 Hz and 3840x2160 @ 50/60 Hz supports 8-bit 4:2:0 choma subsampling, only.

AT-HDVS-150-TX-WP 18
Index
A
Audio
analog audio 12
AUDIO IN port 9
Auto switching 12
C
Connection
diagram 10
instructions 10
Contents
package 8
Customer support 3
D
DISPLAY ON/OFF
button 9, 11
F
Faceplate
removing 13
FCC statement 6
Features 8
Firmware
updating 13
H
HDBaseT OUT
port 9
HDMI IN
port 9
Hot-Plug Detect 12
I
INPUT SELECT
button 9, 11
Installation 10
L
LINK
indicator 9
O
Operating notes 3
P
Panel descriptions 9
S
Safety information 6
Specications 15
Switching
auto 12
auto-switching 12
inputs 11
V
VGA IN
port 9, 11
W
Wall plate
installing 10
power 10
Warranty 4

© 2019 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specications and
availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.
Toll free US International
atlona.com •877.536.3976 •41.43.508.4321