Paragon GZ3584 User manual

Corner profile (1)
x 4 Corner profile
cover (27)
x 4
Support plate (2)
x 4
Screw (46)
x 12
1 1 1 1
x 4
1
2
2 2 2
x 4
1
2
46
46
46
1.A
1.B 1.C
STEP 1
Components
1
27
x 4
Assembling the Corner Profiles
6 of 24
Place corner progiles (1) parallel to each other
on the ground. Slide support plates (2) into
corner profiles from the end with a single
screw hole, as shown.
Place all the parts on a level surface.
Make sure the pieces are in the corrnect positions before assembling.
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
Fasten each plate to profile using
three screws (46). Insert corner profile covers (27)
into top ends of corner profiles (1)
as shown.

2121212121
21212121
2121212121
Roof profile (5)
x 2
Roof profile (6)
x 2
2.A
2.B
STEP 2
Components
Roof profile (3)
x 2
Roof profile (4)
x 2
4
46
46
x 2
x 2
Assembling the Roof Profiles
Screw (46)
x 8
3
7 of 24
Place all the parts on a level surface. Make sure the pieces are in the correct positions
before assembling. Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
Insert end of long roof profile (3)
into long roof profile (4) as shown.
Fasten with screws (46).
Repeat to make two sets.
4
34 3
6 5
6 5
Insert end of short roof profile (5) into short roof profile (6) as ahown. Fasten with screws (46).
Repeat to make two sets.

3.A
STEP 3 Attaching Roof Profiles to
Corner Profiles
Screw (47)
x 32
Components
Attach long roof profile sets (3,4) to corner profiles (1) as shown.
Fasten with screws (47).
Repeat to make two sets.
Attach short roof profile sets (5,6) to corner profiles (1)
as shown.
Fasten with screws (47).