Paragon GZ3DS User manual

Paragon Group USA
Customer Service:[phone] Email:[email protected]
5
Assembly Instructions
Gazebo GZ3DS
Aluminium Composite Roof Panels

of 122
No. ProfileQty Step
41 1
42 1
4
31
4
4
1
8
5
3
48
6
1
40
7
3
24
8
3
9
3
List of Parts
10
4 1
24
We included some extra screws and bolts for your convenience.
No. ProfileQty Step
16
11 3
32
12 3
Customer Service:[phone] Email:[email protected]
five
contact customer service before bedinning assembly:
Screen
Upper frame A
Upper frame B
Lower frame A
Lower frame B
Lower frame C
M4*9
M4*18
M4*25
13
14
M4*12
40
24
Plastic anchor
Washer
Screen handle
Handle seal
2
2

of 123
1.A
Assembling the Screen Frames
Place all the parts on a level surface .
Make sure the pieces are in the correct positions before assembling.
Carefully follow the order of assembly to ensure an easy installation.
Wear proper safety gear including work shoes, gloves and goggles.
STEP 1
Remove all the screws from the support plates,
and remove the support frames from the posts.
Attach the support plates to the posts and fasten
with the screws.
NOTE:
You may skip step 1.A if support plates is not assembled.
posts
support
frames
screws
support
plates
posts
screws
support
plates
ATTENTION:
DO NOT ATTENT TO
ASSEMBLE ALONE.
x 4

of 124
Components
Upper frame B(3)
x 4
Lower frame A(4)
x 4
Upper frame A(2)
x 4 x 4
Lower frame B(5)
Screw(7)
x 48
Screen(1)
x 4
7
1
5
4
1
3
2
x 4
1.B
Carefully unpack part(1) on the floor,
and attach lower frame B(5) to screen
(1), lower frame A(4) to lower frame-
B(5) and the other end to screen(1)
with screw(7).
Attach upper frame B(3) to screen(1),upper frame A(2)
to upper frame B(3) and the other end to screen(1) with screw(7).
5
1
7
4
5
7
1
4
7
3
1
7
2
3
7
1
2
ATTENTION:
Do not use sharp tools to remove packaging material. You may simply
remove it by hands. Do not cut the string of screen frame(1) during unpacking.
Lower side
Upper side
ATTENTION:
Do not caught the string of the screen(1) during assembling,
the string should be unrestrained for open/close functions.
2,3,4,5
X

of 125
2.A
1
2.A
13
1
Assembling the Screen Handles
STEP 2
Components
Screen
handle(13)
x 16
Handle
seal(14)
x 32
13
1
14
13
13
1
1
1
13
Place screen handle(13) to a desire position then click into
screen(1).
Attach handle seal(14) on both side of screen handle(13)
to secure its positions.
Repeat to fix all screen handles on both sides.

of 126
Assembling the Screen Base
STEP 3
Components
NOTE: Do not attent to assemble alone.
VIEW FROM THE TOP
Plastic anchor(10)
x 24
Screw(9)
x 24
6
Lower frame C(6)
x 8
6
Washer(11)
x 24
3.A
Place lower frame C(6) next to the support plates, align the middle gap of lower frame C(6)
paralled to the posts corner shape on both ends, then mark all holes on the floor.
6 6

of 127
10
Remove lower frames C(6) and drill holes you have just
marked on the floor.
3.B
Insert part(10) into the hole by a hamer. Place lower frame C(6) to the
same positionof step 3.A, and fix it with screws(9), washer(11) into the
pre-drilling holes.
6
6
6
6
6
6
6
6
9
6
11
VIEW FROM THE TOP
6 6

of 128
3.C
2 3
VIEW FROM INSIDE
6
1
Components
Screw (12)
x 40 x 40
Screw (8)
1
1
VIEW FROM INSIDE
2 3
6 6
4,5
Remove lower four screws from the middle of rails,
and save the removed screws for later use.
Attach the pre-assembled screen frame(1) to lower
frame C(6) from inside.
Attach upper side of screen(1) to the rail,using the screws you have just removed from the middle of
the rails to the same position to secure screen(1).
4
5
6
6
Lower side
Upper side

of 129
3.D
1
12
1,2,3
8
1
posts
Secure the pre-assembled screen frame with screws(12) on the horizontal
direction, and screw(8) in the parallel directionas.
8,12
88
12
Slightly pull the screen to left and right to make sure the screen is properly functional, or check back on
step 1.B to make sure all string of the screen(1) are unrestanined.
inside

of 1210
ATTENTION:
Pull all the screens to the side (to posts direction) when not using. Leave the screen open may cause
irregular breaking from wild aniaml or shorten the life time use of the screens.

of 1211

Assembly Instructions
Gazebo GZ3DS
Aluminium Composite Roof Panels
Paragon Group USA
Customer Service:[phone] Email:[email protected]
WARRANTY:
Warranty covers damage due to manufacturing defects only. Warranty
damages caused by not following assembly instructions and adhering
to warnings in manual.
properly during assembly to minimize any possibility of leaking.