Parblo Intangbo M User manual

1
User Manual for Intangbo M Graphics Tablet
Key Warnings:
1. Do not disassemble or refit the device. Damages such as heating, fire hazard, electric shock and personal injury may be
caused if you don’t follow such instruction. The warranty will be void in case of any disassembly;
2. Do not excessively bend the USB cable to avoid any damage. Damaged or broken USB cables, or any touch with water
and other liquid may cause malfunction, fire hazard and electric shock;
3. Do not insert any metal object or foreign item into the mouth or ports. Damages such as malfunction and electric
shock may be caused if you don’t follow such instruction;
4. Keep out of reach of children, and separated parts or accessories may be swallowed accidentally by kids if you don’t
follow such instruction;
5. Do not wipe the product with alcohol, organic solution or neutral detergent in order to avoid damages such as color
change;
6. The following damages aren’t covered by the warranty scope:
(a) Damages caused by the large fluctuation of temperature;
(b) Damages caused by naked fire;
(c) Damages caused by falling
7. Do not disassemble the product due to its built-in precision electronic circuit. Any malfunction caused by unauthorized
disassembly won’t be covered by the warranty scope, but users can pay for such maintenance;
8. Please wipe the surface with soft clothes and rags.

2
User Manual Outline
I Product Overview
1. Product Diagrams
II Connection Methods
1. Intangbo M Connection Methods
2. Computer System Requirements
III Install Drive Programs
1. Installation Notes
2. Windows
3. Mac
IV Introduction to the Driven Page
1. Windows
2. Mac
V Remove Drive Programs
1. Windows
2. Mac
VI Frequently Asked Questions and Solutions

3
I Product Overview
Intangbo M Diagrams
Figure 1-1 Diagrams
(1) Working Area
(2) Pen Slot
(3) Custom Shortcuts
(4) Mechanical Rotation
(5) Rotation Switch Key
(6) Working Indicator
(7) USB Type-C Data Transmission Port
II Connection Methods
How to Connect the Intangbo M Graphics Tablet to Your Computer:
The graphics tablet can work with computer and Android devices (the default option is to work with computer). Users can
refer to the following ways to switch its working modes between computer and Android device:
(1) Simultaneously press any key for 3s, then release them. At this time, the indicator will be off after 1s quick flash, and it
accomplishes the switch at this time;
(2) Press any key for 3s again to switch to the original mode.
1. Computer Connection
Connect the USB Type-C cable to your computer and graphics tablet. For desktop computers, please connect to the rear
USB port of the computer case.

4
Figure 2-1 Computer Connection
2, Android Mobile & Android Laptop Connection
(1) Turn on the OTG function in mobile (laptop) settings (the default option of some devices is to turn on the OTG function,
so you can ignore this step);
(2) Insert the OTG adapter into your mobile (laptop);
(3) Separately connect the cable’s USB and Type-C port to the OTG adapter and graphics tablet, and meanwhile keep the
mobile (laptop) and graphics tablet upright (refer to the figure 2-2);
(4) Keep the mobile (laptop) and graphics tablet upright during working, and turn off the screen’s auto rotation function;
(5) Simultaneously press any key for 3s, then release them to switch to the mobile working mode. At this time, you can
turn on the mobile drawing app to start your drawing.
Figure 2-2 Android Device Connection
III Install Drive Programs
Support the following operating systems:
Windows OS 10, 8 and 7
Mac OS 10.11 and more advanced systems
Notes:
(1) Please momentarily turn off antivirus software and firewall on computer prior to installation;
(2) Turn off all software such as Photoshop, AI and OneNote;
(3) If drivers of other graphic drawing tablets or monitors have been installed, please restart your computer after you
remove them, then install Intangbo M drive program;
(4) Download the latest drive program on the official website of Parblo (www.parblo.com), then decompress and open the
file. Click “.exe”or “.pkg”to install;
Windows
1, Connect the USB Type-C cable to your computer and graphics tablet. The indicator will be off after flashes once, which
indicates a successful connection;
2, Download the latest drive program on the official website of Parblo (www.parblo.com), After the download is complete,

5
click “.exe”the installation package to install it;
3, The green Parblo icon can be found on Taskbar in the lower-right corner of the screen after a successful
installation. Please repeat the step 2 if you fail to find the small icon;
Mac
1, Connect the USB Type-C cable to your computer and graphics tablet. The indicator will be off after flashes once, which
indicates a successful connection;
2, Download the latest drive program on the official website of Parblo (www.parblo.com), then click “.pkg”to download
after the file is decompressed;
3, You can find the Parblo icon in the Launchpad after a successful installation;
4, “Permission Settings Description”will jump when you turn on the driver for the first time. File descriptions should be
installed to guide your settings in case of 10.14 or more advanced systems; for systems lower than Mac 10.14, it doesn’t
require such settings, and you only need to close the file;
IV Introduction to Drive Functions
Windows
Find the Parblo icon on the desktop, and double click to open the drive page of the graphics tablet. You can
also find the Parblo icon on Taskbar in the lower-right corner of the screen, and click to open;

6
Figure 4-1 Windows Drive Page
1. Pen Settings Interface
1.1 Pressure Testing Area
Test whether there is pressure change during drawing in the area.
Figure 4-2 Pressure Testing Area

7
1.2 Pen Key Settings
Set functions of 2 keys in the drawing pen according to your needs. Select hot keys to customize settings in the drop-down
list;
Figure 4-3 Pen Key Settings
Note:
Click keys to activate functions only when the graphic drawing pen is within the sensing height (below 10mm) of Intangbo
M graphics tablet. The current keys’function will show at the bottom of the display after you press keys;
1.3 Pressure Adjustment & the Current Pressure
The change of the “Input”and “Pressure”curve will adjust its pressure sensitivity.
The current pressure shows the pressure sensitivity value.
1.3.1 The default pressure sensitivity—medium pressure
Figure 4-4 Medium Pressure

8
1.3.2 High pressure sensitivity—softer pressure
Figure 4-5 Softer Pressure
1.3.3 Lower pressure sensitivity –harder pressure
Figure 4-6 Harder Pressure
1.4 Coordinate Mode
“Absolute Coordinate” indicates that the graphics tablet matches the coordinate position on display;
“Relative Coordinate” indicates that the position of the graphics tablet relatively maps the screen’s resolution ratio site
(also known as mouse mode)

9
Figure 4-7 Coordinate Mode
1.5 Windows Ink
Check such function to support Windows handwriting tablet protocol, and partial drawing software support Windows Ink
function.
Figure 4-8 Windows Ink
2, Area Settings
Figure 4-9 Area Settings
2.1 Display Settings
Users can select the control area of the graphics tablet as the whole or single display;
2.2 Whole Display
The working area of the graphics tablet can map the whole are of the display;
2.3 System Display Settings
Users can set the computer’s screen resolution and multi-screen working mode;

10
2.4 Rotation Settings
User can set the angle of Intangbo M graphics tablet, and 0° is the default (it means that it can be used on the left). In case
of other angles, please rotate the Intangbo M graphics tablet through the relevant angles clockwise;
2.5 Whole Area
The graphics tablet’s whole working area maps the display;
2.6 Display Scale
Users can adjust the scale of the working are according to the display scale;
2.7 Working Area Settings
Users can set the effective working area of the graphics tablet. In terms of detailed information, please refer to dynamic
graphs.
3, Key Settings
Figure 4-10 Key Settings
Notes:
A. Set the input language to English when you are using shortcut keys, otherwise some functions may fail to work;
B. The default function of shortcut keys is the selected Photoshop command. You can set them according to your needs;
C. The key in the middle of the rotation is set to switch the rotation functions.
3.1 Key Settings
The default setting of Parblo is the shortcut functions of Photoshop, and you can customize the functions of K1, K2, K3, K4,
K5, K6, K7 and K8. Click the drop-down list to select “Hot Keys” and enter the self-defined interface.

11
Figure 4-11 Self-defined Key 1
Figure 4-12 Self-defined Key 2
3.2 Rotation Settings

12
Figure 4-13 Rotation Settings
The default functions of R1, R2 and R3: Mouse wheel, Canvas size (Photoshop), Brush size (Photoshop). R4, R5 and R6
come no functions, and you can click the drop-down list to define your settings according to your actual demands.
Figure 4-14 Self-defined Rotation 1

13
Figure 4-15 Self-defined Rotation 2
3.3 Turn off Prompts & Disable Shortcut Keys
Check “Turn off Prompt”, and no function names will be prompted during your use;
Check “Disable Shortcut Keys”, and keys’ functions fail to work.
3.4 Self-defined Options
Figure 4-16 Self-defined Option 1
The default setting is the Parblo built-in key + rotation function (Photoshop), and you can click to add in order to configure
more software with self-defined keys’ functions.

14
Figure 4-17 Self-defined Option 2

15
Figure 4-18 Self-defined Option 3
Click the software icon that has been added to customize its key and rotation functions;
Select the software icon and click “Remove” to delete the current software configuration;
Click “Reset” to restore the default settings.
4, Configuration Settings
Figure 4-19 Configuration Settings
You can save and read the set value of functions such as shortcut keys and rotation via export and import configuration.
Note:
When all the shortcut key functions are set, you can click "Export Configuration" to save your settings.

16
Figure 4-20 Export Configuration
Figure 4-21 Import Configuration
5, About

17
Figure 4-22 About
Show the current driver version: 3.2.1.6
Mac
You can find the Parblo icon in the Launchpad, then click to open the drive interface.
Figure 4-23 Drive Icon
1, The Main Interface

18
Figure 4-24 Drive Interface
1.1 Pen Settings
Set functions of 2 keys in the drawing pen according to your needs. Select hot keys to customize settings in the drop-down
list, and click “Default pen settings” to restore keys’ functions to factory default settings;
Figure 4-25 Pen Settings
Note:
Click keys to activate functions only when the graphic drawing pen is within the sensing height (below 10mm) of Intangbo
M graphics tablet. The current keys’ function will show at the bottom of the display after you press keys;

19
1.2 Configuration Settings
Check “No Pressure” to turn off the pressure sensitivity function;
Check “No Prompt” to turn off the key/rotation function prompt;
Check “No Shortcut Key Function” to turn off the key function.
Figure 4-26 Configuration Settings
1.3 Rotation Settings
The default working mode is 0°(it means that it can be used on the left);
You can adjust the laying style of Intangbo M graphics tablet according the way that you hold pens, and now it supports 4
working angles.
Figure 4-27 Rotation Angles
1.4 Pressure Settings
The change of the “Input” and “Pressure” curve will adjust its pressure sensitivity.
The bottom pressure line shows the current pressure sensitivity value.

20
Figure 4-28 Pressure Test
1.5 Coordinate Mode
“Absolute Coordinate” indicates that the graphics tablet matches the coordinate position on display;
“Relative Coordinate” indicates that the position of the graphic drawing pen relatively maps the screen’s resolution ratio
site (also known as mouse mode). Now, only graphics tablet supports such mode, instead of graphic drawing monitor.
Figure 4-29 Coordinate Mode
2, Display Settings
Users can select to make the graphic drawing pen control the whole display or main display/external display;
Users can select “Custom Screen Area” to adjust the display area controlled by the graphics tablet.