pardo NewCare V1 User manual

Quick reference sheet
www.pardo.es
TECHNICAL SERVICE CENTRE
([phone] For more information, please consult the
use and maintenance manual.
NewCare V1 Bed
Bed’sComponents
ARemovable headboard HBackrest spindle
BBackrest side rails IIntegral wheels (Ø150 mm.)
CLegrest side rails JBraking pedal.
DHPL Mattress platform LLifting pedal
ESheet steel central section MProtection discs
FRemovable footboard PTrend / Reverse trend handle
GLegrest spindle
Cleaning
Daily cleaning and disinfection with soapy water:
Rails. Head board. Foot board.
Cleaning and disinfection after a patient leaves or
before a transfer:
Mattress platform area. Chassis of the bed.
Thorough cleaning and disinfection every two
months:
Support and lifting area of the bed.
maintenanCe
Always check the correct state of:
Mechanical drives.
Wheels.
Braking mechanisms.
Cód:PCO741794_FichaRapida_NewCareV1_EN_2020feb. 2021
A B E F
G
JH
I
C
D
M
A D EF
H
MJL I
C
B
G
P

SAFETY WARNINGS
The maximum duration of a continuous manoeuvre should not exceed 2 minutes, as damage may be caused to the equipment.
Before raising and lowering the moving parts of the mattress platform, with the other parts of the bed or accessories, it is essential to check that there are no obstacles
between them.
The Trendelenburg and reverse Trendelenburg movement should always be performed under medical supervision.
Industrias Pardo. C/ Los Ángeles 5, (Polígono Centrovía) - 50198 La Muela, Zaragoza (Spain)
meCHaniCal FUnCtions
seCtions movements
Unlock crank:
Pull the lever bed outwards.
Direct it to its working position.
Push the lever to the correct position.
Articulating sections:
Raise: Turn clockwise the left crank handle..
Lower: Turn anticlockwise the left crank handle.
Trendelenburg tilting:
Press the handle placed on footboard.
Tilt the footboard related to the headboard
until the maximum inclination is reached.
Reverse trendelenburg tilting:
Press the handle placed on footboard.
Tilt the headboard related to the until
the footboard maximum inclination is
reached.
otHer FUnCtions
Side Rails (1):
Raising the rail: Pull the rail upwards until it is immobilised in
the highest position.
Lowering the rail: Pull the handle found underneath the rail
outwards. The rail will automatically lower.
Centralised braking system (2):
Braking the bed: Pedal in low position.
Moving the bed: Pedal in intermediate position.
Activating steering wheel: Pedal in raised position.
Raise mattress platform:
To operate the rising movement is stepping several times the
green pedal until the bed arrives to the desirable height.
Lower mattress platform:
To operate the lowering movement is stepping red pedal.
If the red pedal is kept depressed, the bed lowers to its lowest
position.
HeigHt adjUstment
trendelenBUrg / reverse trendelenBUrg positions
Raising side rails Lowering side rails
Brake Free movement Steering wheel
Unlock crank Working position
Rise the sections Lower the sections