Paris Rhone PE-HE010 User manual

PORTABLE CERAMIC
SPACE HEATER
User Manual
PE-HE010
Questions or Concerns?
[email protected]

THANK YOU
FOR BEING OUR CUSTOMER
Your purchase is truly appreciated!
We hope you are over-the-moon with our product!

IMPORTANT SAFETY
INSTRUCTIONS
Takes up Minimal
Space for
Maximum Heat
01
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS 02
KNOWING YOUR HEATER 05
USING YOUR HEATER 07
TROUBLESHOOTING 11

02 PORTABLE CERAMIC SPACE HEATER 03
PORTABLE CERAMIC SPACE HEATER
INTENDED USE
· This heater is not intended for use in bathroom, laundry areas and similar moist indoor locations.
Never locate heater where it may fall into a bathtub or other water container.
· Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to persons.
· The output of this heater may vary and its temperature may become intense enough to burn
exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat
or an inability to react to avoid burns.
WARNING:
RELATED TO USE
· This heater is hot when in use. To avoid burns, do not let bare skin touch hot surface.
Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at
least 3 feet (0.9m) from the front of the heater.
· Extreme caution is necessary when this heater is used by or near children or invalids and whenever
the heater is left operating and unattended.
· Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been
dropped or damaged in any manner. Discard heater or return heater to authorized service facility
for examination, electrical or mechanical adjustment, or repair.
· Do not use the heater outdoors.
· To prevent a possible fire, do not block air intakes or exhaust in any manner.
· Do not use on soft surface, like a bed, where openings may become blocked.
· A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline,
paint, or flammable liquids are used or stored.
· Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause
an electric shock or fire, or damage the heater.
· Always unplug the heater when not in use.
· Never tamper with the heater or attempt to fix it. Any tampering with, or modification of this
product can result in serious injury, death, or fire, risk of electric shock. Do Not open. No user
serviceable parts inside.
· DO NOT remove product labels that contain warnings or safety instruction.
· Before cleaning, or storage, or when not in use, turn the heater off and unplug it.
ELECTRICAL SAFETY
· This heater has a polarized plug (one blade is wider than the other). To reduce the risk of shock,
this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to
defeat this safety feature. To do so could result in an electric shock hazard.
· Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it
will not be tipped over.
· It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet
(receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
· To disconnect the heater, first turn it off, then remove plug from outlet. Never pull by the cord.
· Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or
reloadable power tap (outlet/power strip).
SPECIFICATIONS
Model
Power
Voltage
PE-HE010
High Level Warm Air (1500 Watts)
Low-Level Warm Air (900 Watts)
Cool Air (21 Watts)
120V AC 60Hz
BEFORE USING THIS APPLIANCE
READ ALL INSTRUCTIONS AND
CAUTIONARY MARKINGS IN YOUR
USER MANUAL AND ON THE
APPLIANCE
READ ALL INSTRUCTIONS
BEFORE USING THIS
HEATER.
SAVE THESE INSTRUCTIONS

05
PORTABLE CERAMIC SPACE HEATER
KNOWING YOUR
HEATER
Takes up Minimal
Space for
Maximum Heat
02
LED Display
Control Panel
Air Outlet
Base
Air Inlet

07
PORTABLE CERAMIC SPACE HEATER
USING YOUR
HEATER
Takes up Minimal
Space for
Maximum Heat
03
Power On/Off
Tap to power on/off.
Note: When plugging in/unplugging the
heater, the power indicator will be on/off.
Warm/Cool Air
Tap to select high-level warm air/low-level
warm air/cool air.
Temperature/Time +/-
·Tap to set the desired temperature.
(41℉-95℉)
·Tap to set the activated timer to power
off. (0-12h)
Oscillation
Tap to enable/disable heater oscillation.
Timer for power-off
·Tap to activate the timer for power-off.
·Long press to cancel the timer.
Control Panel

Warm / Cool Air Temperature / Time
Timer Power Indicator
LED Display Additional Functions
Auto enter standby mode when
the preset temperature is reached;
auto start work when the ambient
temperature is lower than the
preset.
Memory
Function
The heater is designed
with power-off memory
function, it will
remember your last
settings (except timer
setting) once you
power it on again.
Over-heat
Protection
If the ambient
temperature is higher
than 122℉, the heater
will beep 10 times, and
the error code “FF” on
the display will flash
slowly for 75s and then
remain on. Please
unplug it. Let the
heater cool down for
15mins and then plug it.
If the error code
disappears, rest
assured to use it.
08 PORTABLE CERAMIC SPACE HEATER 09
PORTABLE CERAMIC SPACE HEATER
Tip-over
Protection
If the heater is tipped
over, the error code
“P4” will appear on the
display, and tapping
all buttons will be
unresponsive. When
placing it back on a
flat, level and stable
surface and remain
upright, it will enter
standby mode.
Auto
Display-off
The auto display-off
function will be
activated by default
once the heater is
turned on. Tapping
any button can light
up the display.

· Please ensure that the heater works within the
load power of the household circuit, and the
rated current of the used socket is larger than 15A.
· If the socket has been used for a long period, the
plug and socket will get loose. It is recommended
to replace with a new and regular-brand socket,
otherwise it may cause a short circuit.
· Avoid using the heater and other high-power
electrical appliances at the same time. Do not
plug other electrical appliances into the socket
where the heater is plugged in at the same time.
· Always unplug the heater when it is left
unattended or not in use.
11
PORTABLE CERAMIC SPACE HEATER
TROUBLE-
SHOOTING
Takes up Minimal
Space for
Maximum Heat
04
Short circuit occurred when using.
· Make sure the power cord is securely plugged
into the outlet.
· Make sure the heater is placed on a flat and even
surface, and remain upright.
Heater fails to power on.
· Make sure the preset temperature is higher than
the ambient.
· Make sure the heater is placed on a flat and even
surface, and remain upright.
· If the ambient temperature is higher than 122℉,
the heater will stop heating. Unplug it and use
it later.
Heater suddenly stops
during heating.
· Select the high-level warm air.
· Close door and window to guarantee good
airtightness.
· Place in a position conducive to air convection.
Heater powers on but there is
no heat.
E1: sensor open circuit
E2: sensor short circuit
The heater will beep 10 times and tapping all
buttons are unresponsive.
Unplug it from the power source and contact
Paris Rhône Customer Support.
Error code appears on the display.

12 PORTABLE CERAMIC SPACE HEATER
Thanks for choosing Paris Rhône PORTABLE CERAMIC SPACE HEATER .
This product is covered with Paris Rhône product and labor warranty for
12 months from the date of its original purchase.
The warranty will not apply in cases of:
- Accident, misuse, or repairs performed by unauthorized personnel.
- Any unit that has been tampered with or used for commercial purpose.
- Normal wear and tear of wearable parts.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the User Manual,e.g. connection
to an unsuitable mains supply or non-compliance with the instructions.
- Partially or completely dismantled appliances.
- Defects caused by or resulting from damages from shipping or from
repairs, service, or alteration to the product or any of its parts that have
been performed by a repair person not authorized by Paris Rhône.
We can only provide after sales service for products that are sold by
Paris Rhône or Paris Rhône authorized retailers and distributors. If you have
purchased your unit from a different place, please
contact your seller for return and warranty issues.
※Please have your invoice and order ID
ready before contacting Customer Support.
WARRANTY AND SERVICE
The troubleshooting guide addresses the most common problems. If problems persist, feel
free to contact the Customer Support at
www.parisrhone.co
· Unplug the heater, and use the brush attachment on your household vacuum
cleaner to vacuum any accumulated dust off the air inlets/outlets. Wipe down the
entire surface with a soft cloth.
· Place the heater back in the retail carton to protect it from dust. Store it in a cool,
dry location.

[email protected]
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
www.parisrhone.co
Made In China
Rev_1.2-EN
Intertek
5018396
CM

尺寸：120*160mm
骑马订
材质：封面128克铜版纸 内页80克书纸