Park Safe PSODDVR4C-LIVE User manual
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 2 of 15
Contents
1. The PSOCDVR4C-LIVE Installation Guide...............................................................................2
1.1. Purpose of writing ..............................................................................................................2
1.2. Installation Notice ..............................................................................................................2
2. Introduction................................................................................................................................3
2.1. Product Overview...............................................................................................................3
2.2. Specifications .....................................................................................................................3
2.3. Appearance characteristics .................................................................................................4
2.3.1. Overall appearance.................................................................................................5
2.3.2. Overall size (mm) ....................................................................................................5
2.3.3. Front Panel...............................................................................................................5
2.3.4. Rear Panel................................................................................................................6
2.4. Contents..............................................................................................................................7
2.5. Power Connections.............................................................................................................8
2.6. Antenna Connections .........................................................................................................9
2.7. Camera Connections.........................................................................................................10
2.8. Monitor Connection .........................................................................................................13
2.9. Unit Placement within the Vehicle ...................................................................................13
2.10. Default View on the Monitor............................................................................................14
2.11. Triggers ............................................................................................................................14
1. The PSODDVR4C-LIVE Installation Guide
1.1. Purpose of writing
The PSODDVR4C-LIVE User Manual is written to enable users to understand the
features and functions of this PSODDVR4C-LIVE, to correctly install and use the product.
1.2. Installation Notice
Please see the following points with regards to installation:
All installation and maintenance must be performed by professional technicians.
Page 3 of 15
• The normal working voltage range of the device is DC 8V~36V. Please pay attention to the
power input and ensure the stability of the power input line, to avoid the output being short-
circuited.
• The 12V external voltage from PSODDVR4C-LIVE is only used for the camera power supply.
It is not allowed to connect any non-recommended equipment.
• It should be installed in a dry and ventilated environment to avoid the risk of moisture, rain
and vehicle cleaning and flushing. Also keeping the equipment away from heat, dust and
strong magnetic fields.
• Do not insert or remove storage card and/or sim 4G card while the device is powered on.
• Do not open or disassemble the device without the guide of a professional technician.
2. Introduction
2.1. Product Overview
PSODDVR4C-LIVE is a compact, powerful device, which uses a HiSilicon V400 high-
speed processor and embedded operating system, combined with the most
advanced H.265 video compression/decompression, 4G network, GPS, GSENSOR,
etc. The product can support 4-channel 720P or 1080P full-frame recording. It adopts
local storage and wireless data upload, and communicates with the Parksafe On
Demand monitoring platform to provide Tracking and Camera data.
2.2. Specifications
ITEM
PARAMETER
PERFORMANCE
Product Model
IC4G
Function Profile
Video, playback, crash detection, remote real-
time preview, GPS, alarm record, etc.
System
Language
English
Operation System
Linux
Main processor
HI3520DV400
Video
Video Input
4 CH: AHD 1080P
Video Output
1 CH: HDMI, 1 CH: CVBS
Video Standard
PAL, NTSC
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 4 of 15
Video Compression
H.265, 30 FPS
Video Display
1~4 CH
Audio
Audio Input
4 CH
Audio Output
1 CH
Audio Code
G726
Recording
Simultaneous with video recording
Image Processing
& Storage
Image Format
720p/1080p optional
Video Code Rate
720p: 2048Kbps ~ 4096Kbps
1080P: 2048kbps~8192kbps
8 levels, and L1 is the best
Data Storage
2x TF with 256GB maximum, hidden /outside
USB
1x USB (Mouse and WIFI dongle)
Alarm (Optional)
Alarm Input
3 CH high level trigger
RS485 Port
1 CH
Extendable Port
4G LTE
TD-LTE/FDD-LTE
GPS
GPS. Beidou and Glonass as options
Acceleration
sensor
G-sensor
3 axis
Connection port
Output
HDMI connector
Input
Navigation connector
Working
Environment
Working Temp.
-20~ +65℃
Humidity
10%~90%
Shape
Shell
Aluminum alloy
Size
102mmx 114mmx 66mm
2.3. Appearance characteristics
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 5 of 15
2.3.1. Overall appearance
2.3.2. Overall size (mm)
2.3.3. Front Panel
SN.
Label
Definition
1
TF
Storage, 64GB embedded storage. Additional storage can be added
up to a maximum of 128GB via the external TF card slot.
2
SIM
3G/4G
3
USB
Used for programming
4
PWR
It represents the power light in red. If power input is started, the light
is always on.
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 6 of 15
5
REC
Recording indicator. Green = Normal recording operation. Red =
recording storage is not available.
6
GPS
GPS indicator: green. Solid Green = GPS fix has been obtained. If
no fix is available the LED will flash.
7
NET
3G/4G status light, green. When the module is not connected to the
server, the light will flash. When the module is successfully
connected, the light is always on.
8
IR
Remote control signal reception
2.3.4. Rear Panel
Label
Definition
CH-3-4/CH1-2
2-ch or 4-ch CAMERA audio and video input interface
HDMI—OUT
Audio and video output interface
CVBS
CVBS video output interface
3G/4G
3G/4G antenna interface
GPS
GPS antenna interface
IO
3-channel IO input，2-channel alarm output
POWER
Power input interface，DC8-36V
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 7 of 15
2.4. Contents
4.1 Packing List
S.N.
Item
Image
1
Device
2
Power cable
3
Video input cable
4
GPS antenna
5
4G antenna
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 8 of 15
2.5. Power Connections
6 way ‘black’ Power Molex connector :
Red = +ve [9>30v]
Yellow = Ignition [9>30v]
Black = -ve
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 9 of 15
2.6. Antenna Connections
Both the GPS and GSM share exactly the same connectors, but are labelled to
assist with connection to the rear of the DVR.
Placement
The GSM antenna should ideally be stuck to the windscreen as high up as
possible and on the passenger side. The GPS antenna should ideally be placed
in the centre of the vehicle hidden under the dashboard with the black face of
the antenna facing upwards. It needs a clear view of the sky and not blocked by
any dense material and in particular metal.
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 10 of 15
2.7. Camera Connections
The PSODDVR4C-LIVE allows connection of up to 4 cameras. It does support
720, 960 and 1080 formats, however 720 is set as the default. If
alternative formats are required, then please contact Parksafe Technical
Support.
Whilst the PSODDVR4C-LIVE does support the above formats there are
some restrictions upon how they can be configured. The tables below explain
explains the different options:
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 11 of 15
Listed below are the possible camera configurations and the recommended port
into which the camera should be connected.
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 12 of 15
Number of
cameras
Camera
Type
Port
Connection
Camera
Type
Port
Connection
Camera
Type
Port
Connection
Camera
Type
Port
Connection
ONE
Front
CH 1
TWO
Front
CH 1
Internal
CH 2
TWO
Front
CH 1
Rear
CH 2
THREE *
Front
CH 1
Internal
CH 2
Rear
CH 3
THREE *
Front
CH 1
Internal
CH 2
Side
CH 3
THREE *
Front
CH 1
Rear
CH 2
Side
CH 3
FOUR *
Front
CH 1
Internal
CH 2
Rear
CH 3
Side
CH 3
FOUR *
Front
CH 1
Internal
CH 2
Side
CH 3
Side
CH 3
*= An additional camera flylead [Video input cable] will need to be supplied if
more than 2 cameras are being installed.
Front Camera – CH 1 is to be connected to the right-hand side connector of the
two-way fly lead. This fly lead is then connected to the CH2-1 socket on the rear
of the DVR
The correct orientation of the front camera is shown below, with the camera
affixed to the windscreen the mounting plate must be to the left-hand side of the
camera.
Rear Camera – If a Rear Camera is to be installed, the correct orientation of the
Rear camera is shown below, with the camera affixed to the vehicle, the IR
sensor MUST be at the bottom of the camera.
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 13 of 15
2.8. Monitor Connection
If a Monitor is to be installed, there are two options HDMI or AV. If HDMI is used
then a separate 12v power supply must be used to power the Monitor. If AV
monitor is used then power is supplied via the CVBS port on the
PSODDVR4C-LIVE.
2.9. Unit Placement within the Vehicle
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 14 of 15
Installation notes
Where possible the PSODDVR4C-LIVE should be placed horizontally
with the rear of the PSODDVR4C-LIVE and cables facing the inside of
the vehicle to ensure that the X axis is consistent with the driving
direction and the Y axis is perpendicular to the driving direction.
For the connection of camera and PSODDVR4C-LIVE, the joint of the
extension cable needs to be wrapped with waterproof tape to prevent
water stains from entering the cable core.
2.10.Default View on the Monitor
If a monitor has been installed the PSODDVR4C-LIVE has the ability to show a
default camera view, which is displayed on the monitor during normal operation
when no trigger has been activated. The default view is for 4 Channels to
be viewed. If an alternative view is required then this can be requested via
the Parksafe Technical Support team.
2.11.Triggers
The PSODDVR4C-LIVE allows for the use of inputs to trigger actions, such
as changing the view, generating a video etc. The default setup for the
Triggers is as follows :
NO
Enable
Elec
Delay
Record
ALM Link
View
IN1
Emergency
H
1s
ON
AVI_1
CH1
IN2
Reverse
H
1s
OFF
OFF
CH2
IN3
OFF
H
1s
OFF
OFF
CH3
If a reverse or indicator trigger is used then changes may be required to view
the correct channel, this can be performed remotely by the Parksafe Technical
Support team.
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Page 15 of 15
The required wiring is shown below:
X
X
Input 3
NOT USED
Input 1 used for
Panic trigger
Input 2
Used for Reverse
trigger
+VE Input used
for Panic
Button
-VE Input
NOT USED
X
XX
PSODDVR4C-LIVE Installation Guide PARKSAFE GROUP
Table of contents
Other Park Safe DVR manuals
