Park Safe 26-093 User manual

7.Recording operation: In the main menu mode, press the "-" or "+" key to select the "RECORD" icon,
and press the "AV" key to confirm, press the "-" or "+" key to select USER MANUAL
7" AHD Wireless Camera Monitor
RECORDING TIME
TF
8G
196G
32G
64G
128G
Mode
Full view（640*480*1）
14H
28H
55H
110H
220H
QUAD screen（320*240*4）
11H
22H
43H
86H
172H
Split version（400*480*2）
13H
25H
50H
101H
201H
DC power port
IMPORTANT NOTES
1T.he rear(front) view camera functions technically as a driver assistance
device, which cannot be taken as substitute for driver’s responsibility
when operating the vehicle.
2T.o keepthe camera working properly, please cleanthe cameraregularly
to free it from dirt, water drops, snowdrops,etc.
3A. lthough the camera is designed to be waterproof, please do NOT use
high-pressure water jet to wash the camera as this may break the glass
lens.
4.Keep the cables of the camera away from high temperature objectssuch
as engine or exhaust.
5I.f the camera model you have comes without in-built LED lights, please
turn on your license plate light for better vision at night or in dark areas.
6T.he cameraare applicableto vehicles withDC 12Vpower output(10%
higher or lower allowed), please do NOT use it on vehicles with DC 24V
or other power output out of this range, otherwise it is very likely to get
burned.
7T.he specifications of thecamera are subject to change without prior
notice.
Connect to ACC
Connect to GND
Car Cigarette Lighter
5 Ver1.0 6 1
Before operating the monitor, please read this manual thoroughly
and retain it for future reference.
CONNECTION DIAGRAM

7"Digital LCD Monitor
(0.5M cable)
Instruction Manual
DCPower Cable
(1.2M cable)
CarCigarette Lighter
(2M cable)
1. The menu is only allowed to operate insingle-screen mode
Press the "M" key on the display to bring up the menu as follows:
1. PAIRING
2. PICTURE
3. MIR-FLIP
4. CAM SETUP
5. SYSTEM
6. PLAY
7. RECORD
2. For pairing operation, press the "M" key, press the "-" or "+" key to select "PAIRING", and then press
the "AV" key to confirm. At this time, the display shows a 50-second pairing countdown,and the camera is
powered on within the countdown range. After 5 seconds, the camera and the monitor are successfully
paired with the code, and the screen displays the received camera image; if the pairingis unsuccessful,
4. Image mirroring/flip operation: Press the "-" or "+" key to select the "MIR-FLIP" icon, and press the "AV"
key to confirm, enter the image mirroring or flip adjustment state, press "-" or "+" "Button to select (the
selected icon is yellow), press the "M" button to confirm and return to the previous menu;
5. Camera setting operation: press "-" or "+" key to select "CAM-SETUP" icon, and press "AV" key to
confirm, press "-" or "+" key to select CAM1/CAM2/CAM3/ respectively After CAM4/SCANTIME, press
the "AV" key to confirm. When the selected icon turns red, press the "-" or "+" key to change its setting.
After setting, press the "M" key to return to the main menu.
6. SYSTEM menu operation: In the main menu mode, press the "-" or "+" key to select the "SYSTEM"
icon, and press the "AV" key to confirm, press the "-" or "+" key to select TIME/ After
LANGUAGE/COLOR-SYS/AUTO-DIM/DELAYTIME/P-LINE, press the "AV" key to confirm. When the
selected icon turns red, press the "-" or "+" key to change its setting.After setting, press " M" key returns
to the main menu.
**THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE**
Distributed by:
Point to Point Distributions PTY LTD
9/7-8 Len Thomas Place
Narre Warren VIC 3805
1300 882 182
2
the monitor will display "No Signal".
3. Image adjustment operation: press "M" to enter the menu state, press the "-" or "+" key to select the
“PICTURE" icon (the selected icon is yellow), press the "AV" key to confirm and enter the image
adjustment state, press "-" or The “+" key can select BRIGHTNESS/CONTRACT/HUE/VOLUME
respectively and then press the "AV" key to confirm. When the selected picture turns red, press the "-" or
"+" key to adjust the settings. After setting, press"M" "Return to the main menu.
3
7. Play operation: In the main menu mode, press the "-" or "+" key to select the "PLAY" icon, and press
the "AV" key to confirm, press the "-" or "+" key to select the video file, and press the " AV" button to
confirm playback.
4
Camera (0.5M cable)
Power On/Off
Mode
Cam
Adjusting
Menu
Adjusting
Packing Box
INTERFACE
PACKAGE CONTENTS LIST
PARAMETERS
7" Monitor Camera
Power Supply
DC 9V~ 30V
Waterproof Grade
IP69K
Resolution
VGA:640*480/D1:720*480
TV Singal
VGA
SD Card
128G Max
Resolution
720P
TV System
PAL/NTSC
TV System
PAL/NTSC
Transmission Distance
>200m
Power Supply
DC 9V~ 30V
AVinput
2way，split mode
Power Current
TYPE:170mA,Max.250mA
Delay Time
180ms
View Angle
80