Parkside PHKPG 150 A1 Quick guide

IAN 285747
GAS HOT GLUE GUN
PHKPG 150 A1
Operating and safety instructions

A
C
4
1
5
2
3
6
7
8
9
B
10
11
12
13
1.
2.
3.
14

03
Table of contents
1. Scope of delivery / parts list................................................................................................ 04
Description of the parts.............................................................................................................................................................04
2. General .............................................................................................................................................. 04
Symbols used.....................................................................................................................................................................................04
3. Safety.................................................................................................................................................. 05
Appropriate use...............................................................................................................................................................................05
Safety instructions..........................................................................................................................................................................05
4. Before Use........................................................................................................................................ 08
Checking the product and scope of delivery........................................................................................................08
Filling the gas tank (Fig. A)....................................................................................................................................................08
Inserting the glue stick (Fig. B)............................................................................................................................................08
5. Usage .................................................................................................................................................. 09
Lighting the hot glue gun (Fig. C).....................................................................................................................................09
Gluing applications......................................................................................................................................................................10
6. After finishing work................................................................................................................... 10
7. Storage and transport ..............................................................................................................11
8. Maintenance and spare parts..............................................................................................11
Maintenance and repairs........................................................................................................................................................11
Cleaning..................................................................................................................................................................................................11
9. Troubleshooting.............................................................................................................................12
10. Technical specifications.............................................................................................................12
11. Disposal ..............................................................................................................................................13
Disposing of the used device............................................................................................................................................... 13
Disposal of packaging............................................................................................................................................................... 13
Instructions for disposal of the gas cartridge......................................................................................................... 13
12. Warranty ...........................................................................................................................................13

04
1. Scope of delivery / parts list
2. General
Gas hot glue gun
Glue port
Gas regulator marking
Gas supply regulator
Handle
Gas refilling valve
Trigger
Stand
Piezo ignition
Nozzle
Inspection glass for heating chamber
Ventilation opening
2 Glue sticks
Butane refill cartridge Art. 1500002692
3
1
4
2
5
6
7
8
9
12
13
14
11
10
Description of the parts
This manual belongs to this product. It contains important information on safety, usage and
maintenance. Read the manual carefully before using the product. Pay particular attention
to the safety instructions and warnings. Failure to follow the instructions given in the manual
may result in serious injuries or damage to the product. Always include the manual when you
give the product to others. Keep this manual in a safe place for future reference.
Symbols used
Follow the warnings and safety instructions!
The following symbols and key words will be used in this manual, on the product or the
packaging.

05
3. Safety
Appropriate use
This product is only suitable for private use in the hobby and craft area for the following
purposes:
• For gluing wood, cardboard and similar materials over a short time period and
exclusively with 11 mm Ø glue sticks
Any other use of the product is expressly forbidden and is considered as misuse. The
manufacturer cannot be held responsible for damage or injury caused by misuse of the
product. Examples of misuse are given in the following non-exhaustive list:
• Use of unsuitable accessories
• Use and maintenance of the product by someone who is not familiar with the product
and/or who lacks suitable experience
• commercial, business-related, industrial or excessive use of the product
Use the accessories according to these instructions. Failure to follow the instructions in
the manual may lead to serious injury and may invalidate the guarantee. Comply with
applicable local or national regulations concerning the use of this product. Do not make
any modifications to the product. Any modification to the product may be dangerous and is
prohibited.
Read the manual
WARNING! Hot surface
Safety instructions
WARNING! Read the safety instructions carefully. Failure to follow the
safety warnings and instructions may result in fire, explosion and/or serious
injuries.

06
a. Always keep the hot glue gun out of reach of children.
b. Keep the hot glue gun away from your face and away from your clothing when
lighting.
c. The nozzle and other accessible parts are very hot even after the flame has
gone out. Do not touch.
d. Do not expose the hot glue gun to heat more than 50°C or to sunlight for a
long time.
e. The hot glue gun is designed for private use in the hobby and craft area and
for brief durations and is not suitable for long-duration use. Switch off the hot
glue gun during breaks and after a maximum of half an hour of usage for
complete cooling by closing the gas supply regulator.
f. Never work overhead. Hot, molten glue could drip down and injure you.
g. Use the hot glue gun only in well-ventilated places and away from ignition
sources or flammable objects.
h. Do not use the hot glue gun if it is leaking or damaged, or if it is not working
properly.
i. Do not disassemble or open the hot glue gun.
j. Do not make any modifications to the hot glue gun. The assembly and factory
settings should not be altered. – Only replacement parts recommended by the
manufacturer may be used. It can be dangerous to modify the settings or make
changes to the hot glue gun, to remove parts or to use replacement parts other
than those recommended by the manufacturer.
k. Repairs to the hot glue gun should only be carried out by the manufacturer or
by an authorised service centre.
l. Switch off the hot glue gun and place it in its stand during breaks and when not
in use.
m. Wait for one minute after refilling before lighting the hot glue gun.
n. Be careful when using the hot glue gun near flammable materials and
remember that heat can be conducted to concealed flammable materials.
o. Never leave the hot glue gun unattended when switched on.
p. Ensure that the flame is completely extinguished after use. Open the stand of
the hot glue gun and allow the hot glue gun to cool down completely on the
stand before putting it away. Otherwise there is risk of fire.
q. The filled gas tank contains flammable pressurised gas. Take care not to
heat the refillable gas tank. Do not expose the hot glue gun to temperatures
exceeding 50°C / 120°F or to prolonged sunlight. Otherwise there is risk of
bursting or explosion.
r. Read the refilling instructions carefully. Incorrect refilling may lead to accidents.

07
s. Do not use the hot glue gun in surroundings where flammable fumes,
flammable liquids or explosive materials are present. Otherwise there is risk of
fire or explosion.
t. Do not light the hot glue gun near your face, hands, clothing or flammable
materials. Do not light and direct the hot glue gun at others. Otherwise there is
risk of burns.
u. Maintain a safe distance of at least 0.5 m on the side from all objects, as well
as a min. distance of 1 m from objects over the device.
v. The air outlet of the hot glue gun releases hot air. Ensure that the hot glue gun
is always switched off and placed on the integrated stand even during short
breaks, to avoid igniting the work surface or other objects. Do not direct the hot
air outlets towards your eyes, face or others. Otherwise there is risk of burns.
w. Do not inhale the fumes, as they may be poisonous.
x. The glue nozzle becomes extremely hot during and remains hot for a period
after use. Take care to protect yourself from accidental burns.
y. Risk of burns! Do not touch the hot glue or the nozzle with your fingers. Never
point the hot glue gun towards others or animals - the hot glue should not come
into contact with persons or animals.
z. If hot glue comes into contact with your skin, hold the affected area under cold
running water. Do not attempt to pull off any glue which is stuck to the skin.
aa. Never attempt to pull glue sticks out of the device.
bb. Never use inflammable liquids to clean the workpieces.
cc. This device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge.
Children should be supervised to ensure that they do not play with the device.

08
Caution! Danger of fire, burning and/or explosion!
• Switch off the hot glue gun by closing the gas supply regulator and
ensure that the flame is off.
• Allow the hot glue gun to cool completely.
• Fill the tank in a well ventilated place, in an area free of ames or sources
of ignition and at a safe distance from others. Smoking is prohibited when
filling the tank.
• Use only butane refill cartridges, for example commercially
available cigarette lighter gas. Do not use pure isobutane or propane-
butane mixes.
Filling the gas tank (Fig. A)
Inserting the glue stick (Fig. B)
4. Before Use
Checking the product and scope of delivery
• Take the hot glue gun and accessories out of the packaging
• Check whether the delivery is complete (see chapter "Scope of delivery / parts list")
• Check the hot glue gun and accessories for damages.
• Do not use the hot glue gun if it is damaged or parts are missing. Contact the manufacturer
via the service centre listed in the "Warranty" chapter.
• Place the nozzle of the gas canister against the gas refill valve (6) and press it in. Use a
suitable adapter if necessary.
• Take the nozzle of the gas canister out of the refill valve of the device before the gas
begins to flow out.
Wait for at least a minute before igniting the gun for the first time to allow the gas to stabilise.
• Insert a glue stick into the glue port (2) as shown.

09
Note! Risk of damage!
• Always switch off the hot glue gun and place it on the integrated stand
even during short breaks.
• Never use the hot glue gun for more than 30 minutes. After this, allow
the hot glue gun to cool down completely before using it again.
Lighting the hot glue gun (Fig. C)
5. Usage
Ignition
Gas supply
open
Inspection glass
2
3
1
• Push the gas supply regulator (4) upwards and turn it to the right using your thumb until the
valve is completely open.
• Now press the piezo ignition (9) immediately.
• Look through the inspection glass (11) to see if the hot glue gun has ignited successfully. If
yes, the heating chamber will be glowing red. The brightness may vary slightly depending
on the level of the gas in the tank and depending on the quality of the gas used.
• DANGER! In case the hot glue gun does not ignite successfully after numerous five
attempts, close the gas supply regulator immediately to stop the gas flow and refer to the
"Troubleshooting" chapter.

10
Gluing applications
Before gluing
• The surfaces to be glued must be clean, dry and free of grease. Clean the gluing surfaces
before applying the glue if necessary.
• Polished or shiny surfaces should be roughened before gluing.
• Insert a glue stick into the glue port as described above.
• Press the trigger (7) to move the glue stick into the heating chamber.
• Allow the heating chamber and the glue stick to heat up for 2 - 3 minutes until the glue
melts.
• Press the trigger to apply glue to the gluing surface.
After gluing
• After applying glue, bring the workpieces together and press them firmly.
• Use a clamp or similar fixture if required.
• The clamping fixture can be removed after about 5 minutes.
• Allow any surplus glue to cool down completely and subsequently remove it with a knife.
Gluing
Note! Practice before you start working with the glue gun. Carry out trials
on waste material. The correct amount of glue and the feed rate for each
application depend on the size and properties of the materials you wish to
glue and can only be determined by carrying out trials.
6. After nishing work
Note! Risk of damage!
• After completing the work, switch off the hot glue gun and press the
trigger repeatedly to completely use up any residue of the glue stick that
may be present, thus emptying the heating chamber.
• Place the hot glue gun on the integrated stand and allow it to cool
completely.