Parrot Multicomm User manual

-1-
Parrot MULTICOMM
For Nissan 4 steering wheel
Parrot MULTICOMM is a unit able to control Parrot H/F kits with the car’s steering wheel commands
working with ANALOG STEERING WHEEL COMMANDS with OEM headunit installed.
This unit is available in two versions, one working with the CK3000 Evolution, another for the CK3100.
Compatibilty car models :
Nissan Qashqai : 2006 - 2007
Nissan Navarra : 2006 - 2007
Nissan Murano : 2006 - 2007
Parrot Reference :
If you are interested, contact our sales department: [email protected]
For Parrot CK3000 EVOLUTION
- Parrot MULTICOMM : PI090003AA
For Parrot CK3100 LCD
- Parrot MULTICOMM : PI090004AA
Features :
Depending on your vehicle's steering wheel controls, there are several possibilities for using a hands-
free kit with the steering wheel controls:
-Mode 1:the steering wheel does not feature any phone button, but only volume adjustment
controls ("Volume (+)" and "Volume (–)" buttons)
-Mode 2: the steering wheel features a single "Phone" button
-Mode 3:the steering wheel features an "Answer" button and a "Hang up" button

With these Nissan cars, you can only use Mode 1.

Mode 1: Using with the volume adjustment buttons
Depending on the steering wheel controls in your
vehicle, the MULTICOMM interface will enable
you to take full advantage of the features
available on your hands-free kit:
•Answer an incoming call: Press the "Volume (+)" button.
•End a call: Press the "Volume (-)" button.
•Refuse an incoming call: Press the "Volume (-)" button.
•Start the voice recognition
feature: Quickly press the "Volume (+)" button, then press
the "Volume (-)" button.
•Redial the last number:
Quickly press the "Volume (+)", followed by a long
press of the "Volume (-)"until the number is dialled.
•Discreet mode: Quickly press the "Volume (+)" button.
•Exit discreet mode:
During the call, quickly press the "Volume (+)"
button followed by a press of the "Volume (-)"
button
•Increase the volume:
During the call, press the "Volume (+)" button and
then on the "Volume (-)" button repeat this
procedure until you reach the required volume.
•Lower the volume:
During the call, press the "Volume (-)" button and
then on the "Volume (+)" button repeat this
procedure until you reach the required volume.
The followings functions are only possible with Parrot CK3000 Evolution
•Enter the menu:
Press the following sequence twice: “SEEK up”
button then the “SEEK down” button.
These buttons are used to search for radio stations.
•Go forward through the menu:
Press the "Volume (+)" button and then the
"Volume (-)" button, leaving one second
between each press.
•Go backwards through the
menu:
Press the "Volume (-)" button and then the
"Volume (+)" button, leaving one second
between each press.
•Select a menu option: Press the "Volume (+)" button.
•Cancel a function: Press the "Volume (-)" button.
•Reset the hands-free kit:
Repeat the following sequence five
times: press the "Volume (–)"
button and then the "Volume (+)"
button.

Wiring diagram for
CK3000 EVOLUTION and CK3100 LCD
It is important to follow the wiring diagram for your vehicle. We would advise our customers
to have the interface fitted by a professional.
In this technical document, you will find all information for correctly install your Parrot
MULTICOMM interface.
CK3000 EVOLUTION
CK3100 LCD

PARROT MULTICOMM interface
The Parrot MULTICOMM is powered with 12Vdc having negative to the ground.
The Parrot MULTICOMM 14 ways connector has 5 wires that are important for the right
working:
Connect the power cable of the Parrot MULTICOMM interface to the 14-way connector of
the Parrot MULTICOMM interface.
N° Color Function
1 Red / Orange 12v Permanent
2 Yellow Mute input
3 Pink
4 Green / Black
5 Blue
6 Yellow / White
8 Yellow /Brown
9 Grey
10 White V2
11 Blue / Red
12 Brown
13 Purple V1
14 Black Ground
Front view
Back view

Keypad Adapter
Join the connector of the kit's control keypad to the connector on the interface's power cable.
Pin Number Colour
1 Yellow / Brown
2 Grey
3 Yellow / White
4 Pink
7 Brown
8 Blue / Red
9 Green / Black
10 Blue
In case of CK3000 EVOLUTION
Pin Number Colour
2 Green
3 White / Yellow
In case of CK3100 LCD
Pin Number Colour
1 Black
2 Red / Blue
3 Green / Black
4 Brown
5 Green / Red
6 Grey / Black
7 Blue
8 Yellow / Red
Connect the LCD display to the LCD adapter.

Supply connections
Pin Number Colour Description
1 Red 12v Permanent
2 Black Ground
3 Orange 12v Ignition
CK3000 EVOLUTION CK3100 LCD
Connect the Parrot MULTICOMM interface's power cable to the Parrot control unit and to
the power cable of the hands-free kit.
Mute input
Connect the yellow mute wire of the Parrot
MULTICOMM interface :
- To the Parrot yellow mute wire
- And to the car stereo's mute input if
applicable
Notes:
If you don’t know where your mute input is, see
the usual guide of your radio or contact your
Nissan dealer for having the correct position of
mute input.
Colors Cable Description
Yellow Mute cable Mute Output
Yellow MULTICOMM cable Interface Mute input
White ISO Power cable Mute input 1
Yellow ISO Power cable Mute input 2
Blue ISO Power cable Mute input 3

Nissan protocol configuration
The wires corresponding to the Nissan protocol configuration must be connected correctly to your car
stereo’s information. It is important to follow the wiring diagram for your vehicle. We would advise
our customers to have the interface fitted by a professional.
V1 wire must be connected to the 6 pins
V2 wire must be connected to the 16 pins.
N° Color Function Connectors
6 Purple V1
16 White V2