Partex ProMark T-1000 User manual

CABLE I.D. PRINTER
Thank you for purchasing your new PROMARK T-1000 printer. The T-1000 is a professional, por-
table, thermal-transfer printer for Partex profiles, with which you can easily make your own mar-
kers for wires, cables and electrical components. The printer is compatible with Partex software
that enables you to import files directly from Excel. The PROMARK T-1000 is the perfect solution
for contractors, electricians and manufacturers of control cabinets.

1
2
3
4
Remove the stopper and take
up any slack in the ribbon. Push
the cassette in until it clicks into
place.
The shape of the power plug
varies according to country.
Check that the power
switch is turned off.
Attach the AC adapter (N14584).
COVER
Open the cover.
Install the ribbon cassette.
INSTALLING ACCESSORIES
HOUSEHOLD POWER OUTLET
Do not touch the connector (metal part). Do not hold the connection terminal (metal part) of the cassette.
Doing so could cause an improper recognition of the cassette.
CAUTION

5
6
7 8
Close the cover.
Install the tube attachment.
Align the hooks on the tube attach-
ment with the holes in the printer.
Push the tube attachment in until it
clicks into place.
Insert a tube.
Push the tube in until its tip touches
the transport roller 2.
Turn on the power switch.
Transport roller 2
Insert the tube with the curve oriented
as shown in the figure. If the tube is
inserted in a wrong orientation, it can
jam and cause a feed error.
POWER UP

12
13
14
15
16
9
10
11
C
C-
C- 2
C- 2
C2
C= 2
[Example] Printing “C-2” onto PO-05 profile.
PRINTED RESULTS
While holding down [Shift],
press [C].
Press [-].
Press [2].
INPUTTING CHARACTERS
PRINTING
Press [Print].
Make sure that “PO” is selected.
Press [Enter].
Make sure that size PO-05 is selected.
Press [Enter].
Make sure that “Sets to print” is “1”.
Press [Enter].
The tube is automatically fed into the printer
and printing begins. Once printing is comple-
ted, the tube is cut automatically.
“No ribbon cassette” is displayed if the ribbon cassette is not installed. Install
the ribbon cassette. “No ribbon information”. No ribbon amount displayed.
Press enter” is displayed if the information cannot be read due to a ribbon
cassette failure etc. If this message is displayed, follow the instructions on the
screen.
Take out the cut tube.
IF YOU ACCIDENTALLY INPUT AN INCORRECT
CHARACTER
ex. Although you meant to enter “C-2”,
you entered “C=2” by mistake.
ATTENTION!
Press [ ] and [ ] and move the cur-
sor box to the position of the “2”.
1
2Press [Back Space].
The “=” disappears.
3Press [-].