Partex PROMARK T-800 User manual

CABLE I.D. PRINTER
Thank you for purchasing PROMARK T-800 printer. T-800 is a professional, portable, thermal-
-transfer printer for Partex profiles, with which you can easily make your own markers for wires,
cables and electrical components. The printer is compatible with a software that enables you
to import files directly from Excel. PROMARK T-800 is a perfect solution for installers and manu-
facturers of control cabinets

1
2
3
4
Remove the stopper and take
up any slack in the ribbon. Push
the cassette in until it clicks into
the place.
The shape of the power plug
varies according to country.
Check that the power
switch is turned off.
Attach the AC adapter (K30120).
COVER
Open the cover.
Install the ribbon cassette.
INSTALLING ACCESSORIES
HOUSEHOLD POWER OUTLET
Do not touch the connector (metal part) Do not hold the connection terminal (metal part) of the cassette.
Doing so could cause an improper recognition of the cassette.
COUTION
1
2
3
4
Remove the stopper and take
up any slack in the ribbon. Push
the cassette in until it clicks into
the place.
The shape of the power plug
varies according to country.
Check that the power
switch is turned off.
Attach the AC adapter (K30120).
COVER
Open the cover.
Install the ribbon cassette.
INSTALLING ACCESSORIES
HOUSEHOLD POWER OUTLET
Do not touch the connector (metal part) Do not hold the connection terminal (metal part) of the cassette.
Doing so could cause an improper recognition of the cassette.
COUTION
CAUTION

5
6
7 8
Close the cover.
Install the tube attachment.
Align the hooks on the tube attach-
ment with the holes in the printer.
Push the tube attachment in until it
clicks into the place.
Insert a tube.
Push the tube in until its tip touches
the transport roller 2.
Turn on the power switch.
Transport roller 2
Insert the tube with the warp oriented
as shown in the figure. If the tube is
inserted in a wrong orientation, it can
jam and cause a feed error.
POWER UP
1
2
3
4
Remove the stopper and take
up any slack in the ribbon. Push
the cassette in until it clicks into
the place.
The shape of the power plug
varies according to country.
Check that the power
switch is turned off.
Attach the AC adapter (K30120).
COVER
Open the cover.
Install the ribbon cassette.
INSTALLING ACCESSORIES
HOUSEHOLD POWER OUTLET
Do not touch the connector (metal part) Do not hold the connection terminal (metal part) of the cassette.
Doing so could cause an improper recognition of the cassette.
COUTION

12
13
14
15
16
9
10
11
C
C-
C- 2
C- 2
C2
C= 2
[Example] Printing “C-2” on the profile PO-05.
PRINTED RESULTS
While holding down [Shift],
press [C].
Press [-].
Press [2].
INPUTTING CHARACTERS
PRINTING
Press [Print].
Make sure that “Tube” is selected.
Press [Enter].
Make sure that size PO-05 is selected.
Press [Enter].
Make sure that “Sets to print” is “1”.
Press [Enter].
The tube is automatically fed into the printer
and printing begins. Once printing is comple-
ted, the tube is cut automatically.
“No ribbon cassette” is displayed if the ribbon cassette is not installed. Install
the ribbon cassette. “No ribbon information. No ribbon amount displayed.
Press enter” is displayed if the information cannot be read due to the ribbon
cassette failure and so forth. If this message is displayed, follow the instruction
on the screen.
Take out the cut tube.
IF YOU ACCIDENTALLY INPUT AN INCORRECT
CHARACTER
ex. Although you meant to enter “C-2”,
you entered “C=2” by mistake.
ATTENTION!
Press [ ] and [ ] and move the cur-
sor box to the position of the “2”.
1
2Press [Back Space].
The “=” disappears.
3Press [-].