Partner MF-2352 User manual

C5/MF-2352 Quick Start Guide
Identifying components
Fingerprinter
(optional)
Customer Display
(optional)
Camera
(optional)
Speakers
Battery Cover
Battery Cover Locker
Barcode Scanner
(Optional)
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Non-modification Statement
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user󾙓 s
authority to operate the equipment.
SAR notice
The highest SAR value for the device as reported to the FCC is less than 1.6W/kg (limit set by the FCC is 1.6W/kg)
when placed next to the body. The FCC has granted an Equipment Authorization for this device with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines.
Taiwan NCC
󱘈󷍻󸎅󱨴(󱟽󱶧󵠈󹧗󴰻󸯷󲺺󳘮󹧗󴟆󶙹󵢻󸲖󴰢󶖈 12 
14 󴒎)
• 󶪅󲖸󳑎󸑃󸗏󱿷󴏵󱙴󱟽󱶧󵠈󲺺󹰞󹧗󴟆󾗚󹪭󶪅󲓽󲸜󸶳󸌾󱩥󳷦󲧞󲄿󴇻 (NCC) 󸎋󱿔󾗚󱮸󱿡󾗗󲇣󷳌󳦕󱡋󵫞󶻰󲕔󱘗󳕅󳸓󷋩󸙗󴇠󹰞󵠈󾗗󱶩󲡱󱶧󵠈󳦕
󸙗󴇠󱽓󸎅󸌺󱙴󵙗󳘮󱾜󱶧󷃬󾗘
• 󱟽󱶧󵠈󲺺󹰞󹧗󴟆󱙴󱡋󵫞󱘗󳕅󳔈󹯁󹴔󷍶󲶿󾇄󱾜󳌢󳺁󱿷󴰢󸶳󱣭󽘫󶪅󵵏󵢮󴈅󳌢󳺁󵢮󸝮󴂹󾗚󳤑󶓉󱼑󱧃󵫞󾗚󱘼󳻷󲉆󷋼󵎣󳌢󳺁󴂹󳿑󳕅󶱳󶲖󱡋󵫞󾗘
󱴚󹯋󱿷󴰢󸶳󱣭󾗚󳬙󱡽󹧗󱣭󴰢󸉫󲷢󱠓󴘁󱙴󵎣󶬢󹧗󸶳󱣭󾗘
󱟽󱶧󵠈󲺺󹰞󹧗󴟆󹯎󳖟󱾭󱿷󴰢󸶳󱣭󳦕󳉉󴘁󾗗󶋑󲶙󱾜󹃕󵳟󵫞󹧗󴰻󸯷󲺺󳘮󹧗󴟆󸎅󱨵󱙴󳌢󳺁󾗘
Battery Warning
The system uses a 3V CR2450 battery mounted on the mainboard to keep time. There is a risk of explosion if the
wrong battery type is used when replacing. Dispose of used batteries according to local ordinance regulations.
Li-ion batteries can be dangerous. There is a danger of explosion if the battery is incorrectly replaced. Do not expose
to fire or water.
To reduce the risk of fire or burns, do not disassemble, crush, puncture, or short external contacts. Dispose of used
batteries according to state or local hazardous waste requirements.
Safety information
Before installing and using the machine, take note of the following precautions:
• Do not place the unit on an unstable surface, cart, or stand.
• Do not block the slots and opening on the unit, which are provided for ventilation.
• Only use the power source indicated on the marking label. If you are not sure, contact your dealer or the Power
Company.
• When replacing parts, ensure that your service technician uses parts specified by the manufacturer.
• Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic.
Earphone Jack
RS232, USB Port
Trigger Button
DC-IN Jack MSR
Keyboard
Power Button
RFID
CE RF Feature
RF Spec. NFC BT3.0+HS WIFI b/g/n
HT20/40
4G
(LTE FDD )
Frequency
Range 13.56MHz 2402~2480MHz 2402~2482 MHz Band
1/3/7/8
Max. Output
Power (dBm) NA 10
b:15.77dBM
g:15.59dBm
n HT20:13.97dBm
n HT40:14.75dBm
25

Contact Information
Partner Tech Corporation
10F., No.233-2, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan
www.partner.com.tw
Specification
Item Description
System
Processor ARM Cortex-A7Quad-Core 1.1GHz
Memory LDDR3: 1GB (Max : 2GB),eMMC: 8GB (Max : 16GB)
OS Android 5.1
Display 5inch, 1280 x 720 Pixels
Touch Panel 5inch, Capacitor Touch Panel (Multi point)
WLAN 802.11 a/b/g/n
Bluetooth BT 3.0+HS
GPS GPS/GNOLASS/BeiDou
Audio speaker x1, Microphone x1
Sensor G-sensor, Light sensor, Vibration
Security
Processor ARM Cortex-M3
Key specification 0-9,Function Key;15 keys include power key
MSR Track 1/2/3, bi-directional
RFID ISO 14443 Type A/B & ISO 18092 & Mifare I
IC Card ISO 7816 & PBOC/EMV compliant
Printer High speed ,Low noise,Low voltage
Paper Roll Width: 58mm ,Diameter: 40mm
LED indication RFID indication 4x LED indicator
Battery indication 1x charging indicator
Peripherals
(Option)
Customer Display HTN,GREY,1/4Duty,1/3Nias,Transflective,12 O󾙓 clock
Camera AF 8.0M pixels
Fingerprint Image sensor 256 x 360 sensor array format
Scanner 1D LED barcode scanner, 2D image barcode scanner
Wireless
Communication
(Option)
4G LTE FDD : Band 1/3/7/8
SIM 1x SIM card slot
Power
Power Adapter DC 9V/2A
Battery 3.6V/5200mAh Li-ion
RTC Battery CR2450-600mAh
External I/O
USB OTG Micro USB x1
RS232 Mini USB x1
Audio 3.5mm audio jack x1, support CTIA
Expansion slot Micro SD x1(max :128G)
Function Key Trigger x1, Power off x1
Power Power Jack x1
PASM PASM x5or USB card reader x1+PASM x4
Internal I/O
RS232 x1for Fiscal device
I2C x1for Fiscal device
Power DC 3.3V, DC 5V
Item Description
Environment
Operating Temp. 0~ 40
Charging
temperature 0~ 40
Storage Temp. -20~ 60
Humidity 10% ~ 80%, non-condensing
Operating time 8hour
Standby time 120 hour
Dimension (L x W x H) 238 mm x 90 mm x 68 mm
Weight 598g (without batteries)
Certifications Security & Payment
1.PCI PTS 4.x, 2.EMV L1& L2, 3.Visa paywave
4.MasterCard paypass, 5.American Express & JCB
6.PBOC L1& L2, 7.QPBOC L1& L2, 8.TQM
Safety,EMC CE/FCC/NCC/CB
󸎅󱨵󱿾󶍷󽘪󳧼󳬑󳑎󳻱󹉴󴟆/󳧼󳬐󳑎󳻱󴥕󴉝 Model 󽘘󲖸󷳋/󲖸󳑎󽘙󽘪 MF-2352
󲊓󱭬/ 󸽩󱝾󱿾󶌇/
Part name
󹢔󵫞󵙀󸡗󱾜󱯇󱹬󲶙󶕹󷳌/ 󴈄󴪌󴈄󲸓󵙀󸢹󳦕󱭬󶦨/ Hazardous substances' name
󹈭(Pb)󱾛󱯇󱹫
󱿷󵙀/
󹚮(Pb)󱾛󱯇󱹫
󱿷󵙀/
Lead(Pb) and
its compounds
󴭰(Hg)󱾛󱯇󱹫
󱿷󵙀/
Mercury(Hg)
and its
compounds
󹒙(Cd)󱾛󱯇󱹫
󱿷󵙀/
󹜲(Cd)󱾛󱯇󱹫
󱿷󵙀/
Cadmium(Cd)
and its
compounds
󱮺󱫧󹉩(Cr6+)󱾛
󱯇󱹫󱿷󵙀/
󱮺󱞀󹛕(Cr6+)󱾛
󱯇󱹫󱿷󵙀/
Hexavalent
chromium
(Cr6+) and its
compounds
󲡖󴼥󶿃󷔧(PBB)/
󲡖󴼥󶾍󷔧(PBB)/
Polybrominated
biphenyls
(PBB)
󲡖󴼥󱛔󷔧
󹂯(PBDE)/
Polybrominated
diphenyl ethers
(PBDE)
󹄥󲽣󴟆󴚴󱝾/󹄥󲽋󴉝󴋍󱝾/
Metal parts 
󲛶󳾒󴟅󴚴󱝾/󲛶󳾒󴉝󴋍󱝾/
Plastic parts      
󹱰󶆺󴝘󶧪/󴂲󶆺󴝘󶳧/Display
module      
󹧖󸧀󴋄󶧪󱝾/󵫰󸧀󴋄
󶳧󱝾/Circuit board
components

󹧗󴻣󶬢/󱯇󱝏󶬢󴉿/󵫰󴻣󶳢/󱯇
󱝏󶳢󴉿/Power cord /Wire 
󲉉󱿑/󳨬󲠏󲏝/speakers 
󱨵󶻭1. 󾙔󾙕󱢻󳬙󸐋󹯋󹢔󵫞󵙀󸡗󱙴󵵑󱲶󴪓󲀰󹄡󴉃󸤥󱲡󵵑󱲶󴪓󲀰󹄡󲙨󴻬󱦊󾗘
󱨵󶻭2. 󾙔󽘝󾙕
󱢻󳬙󸐋󹯋󹢔󵫞󵙀󸡗󵋡󳯷󹢲󹯋󵸂󾗘
󴉆󸀮󴏵󱡽󳮹 SJ/T 11364 󵵙󸊿󲷢󶴹󱳷󾗘
: 󸀮󶆻󸛋󴈅󲸔󵙀󸢹󲔩󸛋󸽩󱝾󳧟󴈅󲕔󸢹󴉿󳾓󱙆󵵙󲀰󹄡󲕔󲔩 GB/T 26572 󸊿󲷢󵵙󹢔󹄡󸉕󴭁󱝤󱘕󾗘
: 󸀮󶆻󸛋󴈅󲸔󵙀󸢹󷋼󲻒󲔩󸛋󸽩󱝾󵵙󴍆󱘈󲕔󸢹󴉿󳾓󱙆󵵙󲀰󹄡󸤥󱲡 GB/T 26572 󸊿󲷢󵵙󹢔󹄡󸉕󴭁󾗘
This table is prepared in accordance with the provisions of SJ/T 11364.
: Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit
requirement of GB/T 26572.
: Indicates that said hazardous substance contained in at least one of the homogeneous materials used for this part is above the
limit requirement of GB/T 26572.