PASCO ES-9047 User manual

Instruction Sheet
for the PASCO
Model ES-9047
012-01525B
10/91
$1.00
Introduction
The PASCO Model ES-9047 Tapered Cylinder and
Plate contains an interesting shape for charge distribu-
tion demonstrations. The tapered conductive cylinder
measures 13 cm high, 6 cm in diameter at the base and
10 cm in diameter at the top. It is attached to a 25 cm
diameter plate by a plastic insulator. Terminals are
provided for electrical connection to both surfaces, the
cylinder and the plate.
Equipmemt Included:
• Cylinder
• Plate
• Insulating Spacer
• 6-32 Nylon Machine Screw
• 6-32 Hex Nut
Additional Equipment Recommended for Use with
the Tapered Cylinder and Plate:
• Power Supply ES-9049A
• Electrometer ES-9054B
• Faraday Ice Pail and Shield ES-9058
• Charge Producers and Proof Plane ES-9057
TAPERED CYLINDER AND PLATE
Assembly Procedure
To assemble your Tapered Cylinder and Plate:
➀Push the nylon machine screw from beneath
through the center-hole in the the plate.
➁Slide the insulating spacer over the screw.
➂Position the tapered cylinder over the insulated
spacer.
Tighten the hex nut over the screw to hold the
assembly.
scientific
Tapered cylinder
6-32 Hex nut
Plate Insulating spacer
6-32 Nylon machine screw
➃

012-01525B
2
scientific
Limited Warranty
PASCO scientific warrants this product to be free from
defects in materials and workmanship for a period of
one year from the date of shipment to the customer.
PASCO will repair or replace, at its option, any part of
the product which is deemed to be defective in mate-
rial or workmanship. This warranty does not cover
damage to the product caused by abuse or improper
use. Determination of whether a product failure is the
result of a manufacturing defect or improper use by the
customer shall be made solely by PASCO scientific.
Responsibility for the return of equipment for warranty
repair belongs to the customer. Equipment must be
properly packed to prevent damage and shipped
postage or freight prepaid. (Damage caused by
improper packing of the equipment for return shipment
will not be covered by the warranty.) Shipping costs
for returning the equipment, after repair, will be paid
by PASCO scientific.