Patlite LR4 User manual

1
Thank you very much for purchasing our PATLITE product.
●Request the installation and wiring be performed by a
professional contractor if construction work is involved.
●Prior to installation, read this manual thoroughly before
using this product to ensure correct use.
●After reviewing this manual, if there are any questions
regarding this product, please contact the nearest
PATLITE office listed on the back cover of this manual.
Notice to Customer
●Read this manual carefully prior to installation.
●Be sure to return this manual to the customer.
Notice to Contractor
2
3
7
19
33
34
35
50
51
23
Page
1
2
3
4
5
6
7
8
9
10 Specifications
Complete Operation Manual
TYPE
LR4 / LR5 /
LR6 / LR7
B95100502_02
55
11 Replacement Parts
57
12 Optional Parts
Signal Tower
Installation Operation Maintenance
Safety Precautions
Model Number
Configuration
Part Names and
Outer Appearance
Installation
Wiring
Buzzer Pattern Set-up
How to use
the Folding Bracket
Unit Detachment
Method
Troubleshooting
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

2
Warning
Notice
Caution
NOTES TO BE OBSERVED FOR SAFE OPERATION
Warning
Caution
Indicates an imminently dangerous condition:
failure to follow the instructions may lead to
death or serious injury.
Indicates a potentially dangerous condition:
failure to follow the instructions may lead to
slight injury or property damage.
●To prevent from short-circuits, electric shock or damage, observe the following:
- Be sure the power is disconnected before replacement or repair, including the replacement of the fuse.
- Use this product in a properly maintained condition. (Replace or repair if the body, LED unit, etc. are damaged.)
●Request the installation and wiring be performed by a professional contractor if construction work is involved.
Failure to comply may result in fire, electric shock or falling from high places possible cause of failure may occur.
●Avoid long exposure to the Buzzer sound from a close distance. Failure to observe this may lead from irritation to
permanent damage to the ears. ( Flashing/Buzzer)
●In order to maintain protection of this product against dust and waterproofing performance, be sure to use the head
cover, LED unit and buzzer unit in the condition that it was originally attached.
●Do not operate this product without the O-ring or the waterproof packing material. Failure to comply will result in
lower waterproofing performance. Possible cause of failure may occur.
●Do not apply voltage to the Flashing Common line ( , ).
Apply voltage to the power source line ( ) only. Product failure will occur.
●When removing covers or packing from the equipment, which is attached to this product, be careful not to snag the
product. Failure to comply may result in damage to the product.
●To ensure proper safety while using the signal tower, observe the following:
- Perform periodic pre-maintenance.
- As a precaution against problems occurring, use this product together with other equipment.
●Be sure to discharge any static electricity from the body before handling static sensitive parts of this product.
(To prevent damage from static electricity, touch hands or other body parts to metals or an earth ground to discharge
the body from static charge.)
●Use a soft cloth moistened with water when the LED Unit or body must be cleaned up.
(Do not use thinner, benzine, gasoline or oil.)
●With a buzzer unit installed, moisture and oil that adheres to the buzzer unit will influence the sound pressure or tone
quality produced, when an abundance is collected on the top surface of the buzzer unit.
Be sure to periodically wipe off foreign objects with a soft cloth, etc.
●To ensure safety when this product is installed onto equipment, observe the following:
- Do not remove parts beyond those designed to be removed from this product.
- Do not modify or disassemble this product.
- Use only the specified replacement parts listed in this manual.
In order to prevent any damage to the user and other personnel or to assets, note the following:
■The indications for warning are divided into the following classes according to the degree of danger or damage incurred
when the warning is not taken into consideration and the product is not correctly used.
B
02
01
M2
1Safety Precautions
1
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

3
※2
※3Assembly Model
LR4- 02 W
※1LR4- WJ
・
LJ
・
PJ W
※4LR4- 02 WJ
・
LJ
・
PJ
Assembly Model
↓↓↓↓
4↓
LR -
Model
RYGBC
LED Unit Color Tiers
Body Color
Rated
Voltage Flashing/Buzzer
Mounting/
Wiring
LED Color: R
（Red）
/Y
（Amber）
/
G
（Green）
/B
（Blue）
/C
（White）
（From top to bottom）
-Tiers
4
WJ
LJ
Direct Mount / Cable
Pole Mount with L-bracket / Cable
PJ Pole Mount with Circular Bracket
/ Cable
02
M2
24V DC
100-240V AC ※1
B
N
With Flashing/Buzzer※3
No Flashing/Buzzer
51
40
φ
QJ
Pole Mount with Folding Bracket
/ Cable※2
Unit Model
(Body Unit)
↓↓↓
4↓
LR -
W
Off-white
U
Silver※4
LR4-502PJBU-RYGBC
●Φ40 ●LED 5 Tiers ●24V DC ●Pole Mount with Circular Bracket / Cable ●With Flashing/Buzzer
●Silver ●
（From top) Red/Amber/Green/Blue/White ●Color Globe
LR4-302WJBW-RYGZ
●Φ40 ●LED 3 Tiers ●24V DC ●Direct Mount / Cable ●With Flashing/Buzzer
●Off-white ●
（From top) Red/Amber/Green ●Clear Globe
Model Number Example
LR4-M2LJNW
●Φ40 ●100 - 240V AC ●Pole Mount with L-bracket / Cable
●No Flashing/Buzzer ●Off-white
-
Globe
Color
↓
（None）
Color Globe
Z
Clear Globe
LR4-402QJNW-RYGB
●Φ40 ●24V DC ● Pole Mount with Folding Bracket / Cable ●No Flashing/Buzzer
●Off-white ●
（From top) Red/Amber/Green/Blue ●Color Globe
Model Number Configuration
2
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

4
※2
※1
Body Unit LR5- 02Body Unit
Body Unit
※3Assembly Model
LR5- 02
※4
LR5- WT
・
KT
Assembly Model
↓↓↓↓
5↓
LR -
Model
RYGBC
LED Unit Color Tiers
Rated
Voltage Flashing/Buzzer
Mounting/
Wiring
LED Color: R
（Red）
/Y
（Amber）
/
G
（Green）
/B
（Blue）
/C
（White）
（From top to bottom）
-Tiers
WJ
LJ
Direct Mount / Cable
Pole Mount with L-bracket / Cable
PJ Pole Mount with Circular Bracket
/ Cable
01
02
12V DC
24V DC
WT
B
N
With Flashing/Buzzer※3
No Flashing/Buzzer
51
Direct Mount / Terminal※1
KT
Mounting Bracket with knock-outs
/ Terminal (Body Unit)
※2
Unit Model
(Body Unit)
↓↓↓
5↓
LR -
W
Off-white
U
Silver※4
K
Black※4
LR5-502PJBW-RYGBC
●Φ50 ●LED 5 Tiers ●24V DC ●Pole Mount with Circular Bracket / Cable ●With Flashing/Buzzer
●Off-white ●
（From top) Red/Amber/Green/Blue/White ●Color Globe
LR5-302WJBW-RYG
●Φ50 ●LED 3 Tiers ●24V DC ●Direct Mount / Cable ●With Flashing/Buzzer
●Off-white ●
（From top) Red/Amber/Green ●Color Globe
LR5-301LJNW-RYG
●Φ50 ●LED 3 Tiers ●12V DC ●Pole Mount with L-bracket / Cable
●No Flashing/Buzzer ●Off-white ●
（From top) Red/Amber/Green ●Color Globe
Model Number Example
LR5-02WTNU
●Φ50 ●24V DC ●Direct Mount / Terminal
●No Flashing/Buzzer ●Silver
LR5-02KTNK
●Φ50 ●24V DC ●Mounting Bracket with knock-outs / Terminal
●No Flashing/Buzzer ●Black
-
Globe
Color
↓
（None）
Color Globe
5
50
φ
Body Color
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

5
※2
※3Assembly Model
LR6- 02W
※1LR6- WJ
・
LJ
・
PJ W
※4LR6- 02 WJ
・
LJ
・
PJ
Assembly Model
↓↓↓↓
6↓
LR -
Model
RYGBC
LED Unit Color Tiers
Rated
Voltage Flashing/Buzzer
Mounting/
Wiring
LED Color: R
（Red）
/Y
（Amber）
/
G
（Green）
/B
（Blue）
/C
（White）
（From top to bottom）
-Tiers
6
WJ
LJ
Direct Mount / Cable
Pole Mount with L-bracket / Cable
PJ Pole Mount with Circular Bracket
/ Cable
02
M2
24V DC
100-240V AC ※1
B
N
With Flashing/Buzzer※3
No Flashing/Buzzer
51
60
φ
QJ
Pole Mount with Folding Bracket
/ Cable※2
Unit Model
(Body Unit)
↓↓↓
6↓
LR -
W
Off-white
U
Silver※4
LR6-502PJBU-RYGBC
●Φ60 ●LED 5 Tiers ●24V DC ●Pole Mount with Circular Bracket / Cable ●With Flashing/Buzzer
●Silver ●
（From top) Red/Amber/Green/Blue/White ●Color Globe
LR6-302WJBW-RYGZ
●Φ60 ●LED 3 Tiers ●24V DC ●Direct Mount / Cable ●With Flashing/Buzzer
●Off-white ●
（From top) Red/Amber/Green ●Clear Globe
Model Number Example
LR6-M2LJNW
●Φ60 ●100 - 240V AC ●Pole Mount with L-bracket / Cable
●No Flashing/Buzzer ●Off-white
LR6-02WCNW
●Φ60 ●24V DC ● Direct Mount / M12 Connector
●No Flashing/Buzzer ●Off-white
LR6-402QJNW-RYGB
●Φ60 ●24V DC ● Pole Mount with Folding Bracket / Cable ●No Flashing/Buzzer
●Off-white ●
（From top) Red/Amber/Green/Blue ●Color Globe
-
Globe
Color
↓
（None）
Color Globe
Z
Clear Globe
WC
Direct Mount / M12 Connector※2
Body Color
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

6
※1Body Unit
Body Unit
※2Assembly Model
※3
LR7- WT
・
KT
Assembly Model
↓↓↓↓
7↓
LR -
Model
RYGBC
LED Unit Color Tiers
Rated
Voltage Flashing/Buzzer
Mounting/
Wiring
LED Color: R
（Red）
/Y
（Amber）
/
G
（Green）
/B
（Blue）
/C
（White）
（From top to bottom）
-Tiers
WJ
Direct Mount / Cable
02
24V DC
WT
B
N
With Flashing/Buzzer※2
No Flashing/Buzzer
51
Direct Mount / Terminal (Body Unit)※1
KT
Mounting Bracket with knock-outs
/ Terminal
(Body Unit)※1
Unit Model
(Body Unit)
↓↓↓
7↓
LR -
W
Off-white
U
Silver※3
K
Black※3
LR7-502WJBW-RYGBC
●Φ50 ●LED 5 Tiers ●24V DC ●Direct Mount / Cable ●With Flashing/Buzzer
●Off-white ●
（From top) Red/Amber/Green/Blue/White ●Color Globe
Model Number Example
LR7-02WTNU
●Φ70 ●24V DC ●Direct Mount / Terminal
●No Flashing/Buzzer ●Silver
LR7-02KTNK
●Φ70 ●24V DC ●Mounting Bracket with knock-outs / Terminal
●No Flashing/Buzzer ●Black
-
Globe
Color
↓
（None）
Color Globe
7
70
φ
Body Color
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

The full product appearance is indicated according to its model number. Refer to the model numbers as a reference to its appearance.
（Body Color: Off-White , Globe:Color Globe）
BNBNBN
WJ
PJ
LJ
LR5
01 02
/
M2
BNBNBN BNBNBN
02
M2
LED Tiers
Model
Flashing/Buzzer
Rated Voltage
QJWJ
PJ
LJ
Mounting/Wiring
LED Tiers
Model
Flashing/Buzzer
Rated Voltage
Mounting/Wiring
LR4
Tier -
1Tiers (Drawing is Tiers.)
5 5
Tier -
1Tiers (Drawing is Tiers.)
5 5
02
Assembly Model
Outer Appearance List
02
BN
02
M2
02
B
WT
Tiers
5
Part Names and Outer Appearance
3
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

8
BN
WJ
LR7
M2
BNBNBN BNBNBN
02
M2
QJWJ
PJ
LJ
LR6
02
02
LED Tiers
Model
Flashing/Buzzer
Rated Voltage
Mounting/Wiring
LED Tiers
Model
Flashing/Buzzer
Rated Voltage
Mounting/Wiring
Tier -
1Tiers (Drawing is Tiers.)
5 5
Tier -
1Tiers (Drawing is Tiers.)
5 5
WC
BN
02
M2
02
Tiers
3
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

9
Unit Model (Body Unit)
WJ
PJ
LJ
LR5
01 02
/
02
M2
Model
Flashing/Buzzer
Rated Voltage
QJ
WJ
LJ
Mounting/Wiring
Model
Flashing/Buzzer
Rated Voltage
Mounting/Wiring
Model
Flashing/Buzzer
Rated Voltage
Mounting/Wiring
LR4
N
PJ
M2
02
N
WJ
LR7
02
02
M2
QJ
WJ
LJ
LR6
N
PJ
M2
02
N
WT
LR7
02
N
LR5
WC
02
M2
02
02
M2
02
KT WT KT
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

10
7
1
4
5
6
3
2
3
7
4
5
6
7
1
3
4
5
6
7
２
3
4
5
6
LR4 : ∅40 , LR5 : ∅50
LR6 : ∅60 , LR7 : ∅70
LR4 : ∅40 , LR5 : ∅50
LR6 : ∅60 , LR7 : ∅70
LR4 : ∅40 , LR6 : ∅60
LR4 : ∅40
,
LR6 : ∅60
・Maximum Board Thickness : 7
・Cable : UL2464 (∅7.5)
Signal Wire & Power Supply Wire : AWG24
Cable Length: Off-white (1300)
Silver （3300）
・Maximum Board Thickness : 7
・Cable : UL2464 (∅7.5)
Signal Wire : AWG24
Power Supply Wire : AWG18
Cable Length: (1300)
No. Name
1 Buzzer Unit
2 Head Cover
3 LED Unit
4 Body
5 Direct Mount Bracket
6 Waterproof Packing
Silicone Rubber
Material
Cable7
PC
PC
Globe: PC
PC
PC
PVC
Accessory
Hexagon Nut with Flange（M3）
3 pcs.
LR4·5 -WJ
Hexagon Nut with Flange（M4）
3 pcs.
LR6·7
-WJ
LR
□
-
□□
: 99
LR
□
- 1
□□
: 139
LR
□
- 2
□□
: 179
LR
□
- 3
□□
: 219
LR
□
- 4
□□
: 259
LR
□
- 5
□□
: 299
LR□- □□□WJB□LR□- □□□WJN□
LR□- □M2WJBW LR□- □M2WJNW
[ Direct Mount with Cable （, ） ■WJ 01 02
40
(90)
53.5
12
LR□- 1□□ : 173.5
LR□- 2□□ : 213.5
LR□- 3□□ : 253.5
LR□- 4□□ : 293.5
LR□- 5□□ : 333.5
40
19
12
(90)
40 40
53.5 19
(90)
12
(90)
12
LR
□
-1M2 : 243.5
LR
□
-2M2 : 283.5
LR
□
-3M2 : 323.5
LR
□
-4M2 : 363.5
LR
□
-5M2 : 403.5
LR
□
- M2 : 169
LR
□
-1M2 : 209
LR
□
-2M2 : 249
LR
□
-3M2 : 289
LR
□
-4M2 : 329
LR
□-
5M2 : 369
[ Direct Mount with Cable （）■WJ M2
（Unit: mm）
Part Name and Dimensions
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

11
1
3
4
7
6
5
8
9
10
2
3
4
7
6
5
8
9
10
L-bracket and Pole Mount with Cable (, ) ■LJ
No. Name
1 Buzzer Unit
2 Head Cover
3 LED Unit
4 Body
5 Pole Bracket
6 Pole
7 Rubber Bushing
Material
8 Cable
9 L-bracket
Globe
: PC
PC
PC
AL
Steel
EPR
PC
10 Hexagon Nut M22 SUM
PVC
PC
01 02
LR□- □□□LJB□LR□- □□□LJN□
40
LR4 : ∅40 , LR5 : ∅50 , LR6 : ∅60
∅21.7
(90)
53.5
(285)
∅21.7
LR4 : ∅40 , LR5 : ∅50 , LR6 : ∅60
40
19
20 55
80
3
(90)
LR□-
□□ : 99
LR□- 1□□ : 139
LR□- 2□□ : 179
LR□- 3□□ : 219
LR□- 4□□ : 259
LR□- 5□□ : 299
(285)
(20)
LR□- 1□□ : 173.5
LR□- 2□□ : 213.5
LR□- 3□□ : 253.5
LR□- 4□□ : 293.5
LR□- 5□□ : 333.5
・Cable : UL2464 (∅7.5)
Signal Wire & Power Supply Wire : AWG24
Cable Length: Off-white (1000)
Silver （3000）※LR4, LR6
(15)(15)
（Unit: mm）
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

12
1
3
4
7
6
5
8
9
10
2
3
4
7
6
5
8
9
10
L-bracket and Pole Mount with Cable () ■LJ
No. Name
1 Buzzer Unit
2 Head Cover
3 LED Unit
4 Body
5 Pole Bracket
6 Pole
7 Rubber Bushing
Material
8 Cable
9 L-bracket
Globe
: PC
PC
PC
AL
Steel
EPR
PC
10 Hexagon Nut M22 SUM
PVC
PC
M2 （Unit: mm）
LR□-□M2LJBW LR□- □M2LJNW
40
∅21.7
53.5
(285)
∅21.7
40
19
20 55
80
3
(90)
(285)
(20)
(15) (15)
(90)
LR4 : ∅40 , LR6 : ∅60
LR4 : ∅40 , LR6 : ∅60
LR□-1M2 : 243.5
LR□-2M2 : 283.5
LR□-3M2 : 323.5
LR□-4M2 : 363.5
LR□-5M2 : 403.5
LR□- M2 : 169
LR□-1M2 : 209
LR□-2M2 : 249
LR□-3M2 : 289
LR□-4M2 : 329
LR□-5M2 : 369
・Cable : UL2464 (∅7.5)
Signal Wire : AWG24
Power Supply Wire : AWG18
Cable Length : (1000)
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

13
1
3
4
6
5
８
7
99
２
3
4
6
5
８
7
Circular Bracket and Pole Mount with Cable (, ) ■PJ 01 02
40
∅21.7
∅60
(290)
LR4 : ∅40 , LR5 : ∅50 , LR6 : ∅60
(90)
53.5
40
∅21.7
LR4 : ∅40 , LR5 : ∅50 , LR6 : ∅60
∅60
(290)
(90)
19
（Unit: mm）
LR□- □□□PJB□LR□- □□□PJN□
LR□- □□ : 99
LR□- 1□□ : 139
LR□- 2□□ : 179
LR□- 3□□ : 219
LR□- 4□□ : 259
LR□- 5□□ : 299
LR□- 1□□ : 173.5
LR□- 2□□ : 213.5
LR□- 3□□ : 253.5
LR□- 4□□ : 293.5
LR□- 5□□ : 333.5
Accessory
Cross Recessed
Pan Head Screw（M4x20）
3pcs.
Hexagon Nut with Flange（M4）
3pcs.
LR4·5·6 -PJ
・Cable : UL2464 (∅7.5)
Signal Wire & Power Supply Wire : AWG24
Cable Length: Off-white (1000)
Silver （3000）※LR4, LR6
(6)
(6)
35 35
(15) (15)
No. Name
1
Buzzer Unit
2 Head Cover
3 LED Unit
4 Body
5 Pole Bracket
6 Pole
7 Circular Bracket
Material
8 Waterproof Packing
9 Cable
Globe: PC
PC
PC
AL
Silicone Rubber
PC
PC
PC
PVC
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

14
1
3
4
6
5
８
7
9
２
3
4
6
5
８
7
9
No. Name
1
Buzzer Unit
2 Head Cover
3 LED Unit
4 Body
5 Pole Bracket
6 Pole
7 Circular Bracket
Material
8 Waterproof Packing
9 Cable
Globe: PC
PC
PC
AL
Silicone Rubber
PC
PC
PC
PVC
Circular Bracket and Pole Mount with Cable () ■PJ M2
LR4 : ∅40
LR6 : ∅60 LR4 : ∅40
LR6 : ∅60
LR□- □M2PJBW LR□- □M2PJNW
Cross Recessed
Pan Head Screw（M4x20）
Hexagon Nut with Flange（M4）
3pcs.
3pcs.
Accessory
LR4·6 -PJ
35
(6)
40 40
∅21.7
(290)
∅21.7
(290)
(90)
∅60
53.5
19
(15) (15)
35
(6)
(90)
∅60
LR□-1M2 : 243.5
LR□-2M2 : 283.5
LR□-3M2 : 323.5
LR□-4M2 : 363.5
LR□-5M2 : 403.5
LR□- M2 : 169
LR□-1M2 : 209
LR□-2M2 : 249
LR□-3M2 : 289
LR□-4M2 : 329
LR□-5M2 : 369
・Cable : UL2464 (∅7.5)
Signal Wire : AWG24
Power Supply Wire : AWG18
Cable Length : (1000)
（Unit: mm）
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

15
1
3
4
6
5
８
7
2
3
4
6
5
８
7
99
90°
45°45°
Fixed Position
Folding Bracket and Pole Mount with Cable ()■QJ 02
LR□- □02QJBW LR□- □02QJNW
LR4 : ∅40
LR6 : ∅60
40
∅21.7
(335)
□70
(90)
53.5
LR4 : ∅40
LR6 : ∅60
40
∅21.7
(335)
□70
(90)
19
LR□- 02 : 99
LR□- 102 : 139
LR□- 202 : 179
LR□- 302 : 219
LR□- 402 : 259
LR□- 502 : 299
LR□- 102 : 173.5
LR□- 202 : 213.5
LR□- 302 : 253.5
LR□- 402 : 293.5
LR□- 502 : 333.5
No. Name
1
Buzzer Unit
2 Head Cover
3 LED Unit
4 Body
5 Pole Bracket
6 Pole
7 Folding Bracket
Material
8 Waterproof Packing
9 Cable
Globe: PC
PC
PC
AL
CR
PC
PC
PC
PVC
Accessory
LR4·6 -QJ
Cross Recessed
Binding Head Screw（M5x25）
Hexagon Nut with Flange（M5）
4pcs.
4pcs.
・Cable : UL2464 (∅7.5)
Signal Wire & Power Supply Wire : AWG24
Cable Length: (950)
79
(49)
79
(49)
(15) (15)
（Unit: mm）
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

16
1
2
3
4
5
6
Direct Mount with M12 Connector () ■
WC
No. Name
1
2
Head Cover
3
LED Unit
4
Body
5
Direct Mount Bracket
6
Waterproof Packing(t=1)
M30 Nut
Material
PC
Silicone Rubber
PC
PC
Globe
: PC
PC
02 （Unit: mm）
LR6 - □02WCNW
40
∅60
19
LR6 - 02 : 126
LR6 - 302 : 246
25
10
∅52 M30×1.5
1/2’’ NPT Internal Threads
・Maximum Board Thickness : 10
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

17
1
2
3
4
1
3
4
5
2
3 pcs. 3 pcs.
Direct Mount with Terminal Block (Body Unit) （Unit: mm） ■WT
LR5 : ∅50
LR7 : ∅70
80
No. Name
1
2
Head Cover
3
4
Body
Direct Mount Bracket
Waterproof Packing
Silicone Rubber
Material
PC
PC
PC
Accessory
LR5 -WT LR7 -WT
19
12
Hexagon Nut with Flange（M3）Hexagon Nut with Flange（M4）
3 pcs.
Accessory
LR5 -WT
Hexagon Nut with Flange（M3）
Maximum Board Thickness: 7
Direct Mount with Terminal Block （Unit: mm） ■WT
No. Name
1 Buzzer Unit
2
3
LED Unit
4
Body
5
Direct Mount Bracket
Waterproof Packing
Silicone Rubber
Material
PC
Globe: PC
PC
PC
LR5 : ∅50
・Maximum Board Thickness : 7
LR5 - 502WTBW
LR□- 02WTN□
40
12
53.5
LR5 - 502 : 333.5
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

18
1
2
3
4
LR5 : ∅50
LR7 : ∅70
80
19
6 pcs. 6 pcs.
3 pcs. 3 pcs.
Mounting Bracket with knock-outs and Terminal (Body Unit) （Unit: mm） ■KT
Accessory
LR5 -KT LR7 -KT
Hexagon Nut with Flange（M3） Hexagon Nut with Flange（M4）
1 pc.
Pole Waterproof Ring
Hexagon Bolt（M4 x 20）Hexagon Bolt（M3 x 20）
No. Name
1
2
Head Cover
3
4
Body
Mounting Bracket with knock-outs
Waterproof Packing Silicone Rubber
Material
PC
PC
PC
1 pc.
Pole Waterproof Ring
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

19
3
1
20
3
1
35
Opposite Side
27
Make holes for the mounting and wire-distribution for the product.
(Check the Model and refer to the suitable attachment or mounting dimension figure.)
( Select among the two mounting options.)
1
Run the wiring through the distribution hole.
2
Secure the product with the bolts, nuts and screws.
( required nuts and screws are not included.)
3
Notice
LJ
Basic Mounting Instructions
Installation
Figure
■LJ
When not using a
L-bracket attachment,
make a fitting hole
of φ22-23mm.
12.2 N m
Recommended screw Torque
30 N m
Recommended Nut Torque
Point
Feed the wiring
through the hole
and set the pole
in place to install.
32
Mounting
Surface
(Unit: mm) L-bracket
Mounting
Hole
(φ9)
Mounting
Surface
L-bracket
Mounting
Hole
(φ11)
For M8 screw and nut size
For M10 screw and nut size
●The following requirements are necessary for proper installation:
- Install the signal tower where excessive vibration is not present.
- Install the signal tower on a sturdy surface.
- Install the signal tower on a level surface.
●Install the signal tower in an upright position only.
●When the installation location is unavoidably irregular and waterproof performance is required, use a sealant between
the product and the installation surface.
●If the pole type requires an IP65 rating, apply sealant to the screws, nuts and wire distribution hole when installing the
compatible bracket onto the installation surface. ( )
●Although the LR4- mounting bolt moves prior to assembly, it is not a quality issue. Be sure to mount the product in
the manner indicated below.
KT
PJ
・
QJ
WJ
Installation
4
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de

20
LR5
Steel Bar etc.
LR7
φ3
φ4
Mounting Bracket with knock-outs
Underside Mounting Bracket with knock-outs
Topside Hexagon Bolt
Flanged Nut
Waterproof
Packing
（Unit: mm）
0.8 N m
Recommended
Torque
Knock-Out Mount Bracket Side
12
Pole
※Not included with
this product.
Pole Waterproof Ring
Mounting Bracket
Binding Head Tapping Screw
3×12 2pcs.
0.8 N m
Recommended Torque
1.Place the Mounting Bracket on an even surface.
2.Be sure to remove the waterproof packing from the Mounting Bracket.
3.Knock out the three knock-out holes with a steel punch, etc.
4.Insert the hexagon bolt into the knockout holes and affix with the flanged nuts.
5.Insert the waterproof packing.
Select between "Direct" or "Pole" mounting ■KT
Direct Mount
Pole Installation
After inserting accessories,
check the bolt length.
Point
1. Be sure to remove the waterproof packing from
the Mounting Bracket.
2. Install the Pole Waterproof Ring in the Mounting Bracket.
Check that the 2 ribs are on the outside.
3. Insert Pole into the Mounting Bracket.
See the figure on the left for details on the direction of insertion.
4. Tighten the Binding Head Tapping Screws (2 pcs.) from the
topside of the Mounting Bracket.
ghvVertriebs-GmbH|AmSchammacherFeld47|85567Grafing|Telefon[phone]|[email protected]|www.ghv.de