Patriot Lighting ITL465B22ORB-M User manual

1
Sku Number: 347-2302
TABLE LAMP
Model Number: ITL465B22ORB-M
Questions, problems, missing parts?
Before returning to your retailer, call our customer service
at 1-800-267-4427 Monday – Friday 8:00 a.m. – 5:00 p.m. EST
PACKAGE CONTENTS
HARDWARE CONTENTS Note: Hardware not shown actual size.
A
B
C
4
CARE AND MAINTENANCE
TROUBLESHOOTING
1) The light does not come on at all:
a) Make sure the wall switch and circuit breaker are on.
b) Make sure the wiring is correct.
2) Fuse blows or circuit trips when light is turned on.
a) Check for crossed wires, ensure wiring is correct.
If unable to fix any of the above issues, please consult a certified electrician.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service
at 1-800-267-4427 Monday – Friday 8:00 a.m. – 5:00 p.m. EST
5-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING®
light fixture fails due to a defect in material and workmanship within five (5) years
from the date of purchase, simply bring this light fixture with your original sales
receipt back to your nearest MENARDS®retail store. At its discretion, PATRIOT
LIGHTING®agrees to have the lighting fixture replaced with the same or similar
PATRIOT LIGHTING®product free of charge, within the stated warranty period,
when returned by the original purchaser with original sales receipt. This warranty:
(1) excludes expendable parts including but not limited to light bulbs; (2) does not
cover damage that has resulted from abuse or misuse; and (3) does not cover any
losses, labor, injuries to persons/property or costs. This warranty does give you
specific legal rights and you may have other rights, which vary from state to state.
12-16
• To clean, turn off and wipe with a damp, non-abrasive cloth.
• When cleaning, use only a solf brush or lint free cloth to avoid scratchting the finish.
• Abrasive cleaning agents are not required and should be avoided to prevent damage
to finish.
• Clean glass with water only.
AA Spinner nut
x 1
BB Bulb
x 1

23
A
B
C
ASSEMBLY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIOS
PREPARATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
• Do not plug in lamp to power before installation is complete.
• CAUTION- this portable lamp has a polarized plug (one blade is wider than the other)
as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized
outlet only one way. if the plug does not fit fully in the outlet, reverse the plug. if it still
does not fit, contact a qualified electrician. never use with an extension cord unless plug
can be fully inserted. do not alter the plug. AC ONLY.
• Be careful not to damage or cut the wire insulation (covering) during fixture
installation. Do not permit wires to contact any surface having a sharp edge.
To do so may damage or cut the wire insulation, which could cause serious
injury or death from electric shock.
• This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product and
the hazards involved.
CAUTION
• All electrical connections must be in agreement with local codes, ordinances or
the national electric code (NEC). Contact your municipal building department to
learn about your local codes, permits and/or inspections.
• Risk of fire – most dwellings built before 1985 have supply wire rated for 140°F/60ºC.
Consult a qualified electrician before installation.
• Do not connect this fixture to an electrical system that does not provide a means for
equipment grounding. Never use a fixture in a two-wire system that is not grounded.
If you are not sure your lighting system has a grounding means, do not attempt to
install this fixture. Contact a qualified, licensed electrician for information with regards
to proper grounding methods as required by the local electrical code in your area.
Before beginning assembly, installation or operation of product, make sure all parts
are present. Compare parts with package contents list and diagram on previous page.
If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
Switch
1. Remove spinner nut (AA) from socket.
Position cover (B) and glass (C) on lamp (A) and secure with spinner nut (AA).
2. Install specified bulb (BB) type and wattage.
AA
BB