PB TEEN Locker Bookcase 3 User manual

1/3
www.pbteen.com
Locker 3-Shlef Bookcase
PRE-ASSEMBLY:
•Please read all instructions before beginning assembly.
•Two-person assembly is recommended.
•Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
Please Note: For ease in assembling the bookcase, we would recommend inserting screws and tightening only partially
during the assembly. Once all screws have been inserted, then tighten all connections fully.
PARTS & HARDWARE INCLUDED:
A - (46) Screws – 1/4” x 3/8” B – (6) Screws – 5 x 10mm
C – (2) Casters – without brakes D – (2) Casters – with brakes
E – (1) Open-end Wrench – 12mm F – (1) Frame Top
G / H – (1) Side Panels
(Left / Right) I – (1) Upper Shelf
J – (1) Lower Shelf
K – (1) Frame Bottom
L – (3) Back Boards M – (3) Vertical Boards

2/3
www.pbteen.com
F
AA
L
L
L
A
A
A
A
M
I
K
J
H
G
Note:
align the pre-drilled screw
holes in the same direction.
A
TOOLS REQUIRED (but not included):
•Phillips or Flat-head Screwdriver
ASSEMBLY INSTRUCTIONS:
1. Place Shelves (I & J) and Bottom Board (K) into Side Panels (G & H). Ensure pieces are positioned so the edge with
the pre-drilled holes is the back edge.
2. Place Frame Top (F) onto the top of side frames.
Diagram 1. Diagram 2.
3. Insert Screws (A) into pre-drilled holes on frame at locations marked in illustrations above.
4. Place Back Boards (L) to the back of bookcase. Position the Back Boards with concave side faces outward, as
diagram shown. So the hardware will not be visible from the interior of the bookcase.
Diagram 3. Diagram 4
5. Insert Screws (A) into the pre-drilled holes of Back Boards at position marked in the diagram.
6. Slide Vertical Boards (M) into glides.
Diagram 5. Diagram 6.

3/3
www.pbteen.com
BE
C
D
7. Insert the Screw (A) into the pre-drilled holes under the shelf glides at position marked in diagram.
8. Attach Casters without brakes(C) to the back, Casters with brakes (D) to the front of bookcase bottom using Open-
end Wrench (E).
Diagram 7. Diagram 8.
CARE INSTRUCTIONS:
•Dust often using a soft, lint free cloth. A damp cloth may be used.
•Furniture polishes and household cleaners are not recommended.