PB TEEN Antiqued Paneled Mirror Heart User guide

2016-05-30 1 / 2
HARDWARE INCLUDED:
Mounting Instructions:
Connect the two points (A, B) with a light pencil line. Use a level to ensure that the line is level.
Make two insertion marks (C, D) centered along the line using the measurement “a”.
1
3
2
Measure the exact distance between the center
of D
-rings.
With the back of the item facing away from the wall,
hold it against the wall at a desired mounting
location. Mark two reference points (A, B) on the
wall as shown.
4
(2) Screws
(2) Anchors
Antiqued Paneled Mirror: Heart
Mounting Instruction
TOOLS NEEDED (not included):
Note: The provided mounting hardware is meant for
drywall and stud construction only. For other wall
types, please consult your local hardware store for
assistance in selecting the appropriate hardware.

2016-05-30 2 / 2
Use a stud-finder to determine if there is a wall stud located at either insertion mark.
Install the proper hardware, as shown below. Note that the head of each screw resides about 3/8” from the wall.
Hang the item to the wall so that the D-rings engage the screw heads.
Care Instructions:
-To clear: Wipe with a soft, dry or slightly damp cloth.
-Do not use abrasive or strong chemical household cleaners.
Thank you for your purchase.
Stores | Catalog | www.pbteen.com
5
6
For stud mounting:
Tips:
The anchor is self
-drillable.
No pilot hole required.
For non-stud mounting: