PB TEEN BEADBOARD User manual

Date: 2013-Jul.-19 www.pbteen.com Page 1 of 3
Rev: 2013-Aug.-06
BEADBOARD SMALL DESK
ASSEMBLY INSTRUCTIONS

Date: 2013-Jul.-19 www.pbteen.com Page 2 of 3
Rev: 2013-Aug.-06
Important Safety Instructions:
•Please read all instructions carefully before assembling this furniture.
•For your safety, assembly by two or more adults is strongly recommended.
•Keep these instructions for future use.
•Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the
structural integrity of the item.
Pre-assembly:
•Remove all parts and hardware from the box. Place them on a carpeted or scratch-free work surface, as this will
avoid damaging parts during assembly. The shipping box provides an ideal work surface.
•To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or contents of the
shipping carton until assembly is complete.
•Use the parts and hardware lists below to identify and separate each of the pieces included.
•The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
•The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split
wood.
Parts Included:
(A) Desktop (1x)
(B) Leg (4x)
Hardware Included:
(C) Wrench 5/16”x14mm – 1x (D) Nut 5/16” x 14mm – 8x (E) Spring Washer 5/16” – 8x
(F) Flat Washer 5/16”x 22mm– 8x

Date: 2013-Jul.-19 www.pbteen.com Page 3 of 3
Rev: 2013-Aug.-06
Assembly Instruction Steps:
1. Place Desktop upside down on a soft, scratch free working surface.
2. Attach a Leg (B) to one apron corner by inserting pre-installed bolts on the leg through pre-drilled holes on
corner block. Use a Flat Washer (F), a Spring Washer (E) and a Nut (D) to secure from the other end, using
Wrench (C).
3. Repeat with the other 3 legs.
4. Check alignments and tighten all nuts when all 4 legs are in place.
5. To keep the desk level, adjust the levelers located on leg bottoms either in or out.
Care Instructions:
•Dust often using a clean, soft, dry and lint-free cloth.
•Blot spills immediately and wipe with a clean, damp cloth.
•We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
•Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
D
8x
E 8x
F 8x