PB TEEN Tune-in bed Queen User manual

www.pbteen.com
Tune-in bed (Queen)
Pre-Assembly:
Please read all instructions before beginning assembly.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
Parts Included:
(B) Side Rail –2 pcs
(C) Center Support Slat –1 pc
(D) Slat Roll –1 pc
Hardware Enclosed:
(E) Wood Screw –34 pc
(ø6 x 1 ¼” )
Tools Required:
Phillips head screwdriver (not included)
1/2
(A) Footboard –1 pc

www.pbteen.com
Assembly Instructions:
1.Attach each side rail (B) to the Footboard (A) and Headboard Only by inserting the teeth into grooves. Press
down to secure. Fig. 1
2.Place the center support slat onto the wood block on the Headboard Only and footboard (A). Secure with
two wood screws (E). Fig. 2
3.Roll out slats (D) onto side rails (B), positioning the two end slats at the ends of the side rails. Using a
Phillips head screwdriver to fasten two end of each slat to side rails with wood screws (E). Fig. 3
Assembly is completed.
Care Instructions:
Dust often with a soft, dry cloth.
To clean, slightly moisten cloth with water (a damp cloth will hold dust and prevent scratching; dry
thoroughly).
2/2
Fig. 1
wood block
on headboard &
footboard
Fig. 2
Fig. 3
A
B
E
C
E
D