PCE Instruments PCE-360 User manual

www.pce-industial-needs.com
Tursdale Technical Services Ltd
Unit N12B
Tursdale Business Park
Co. Durham
DH6 5PG
United Kingdom
Phone: +44 ( 0 ) 191 377 3398
Fax: +44 ( 0 ) 191 377 3357
[e-mail]
http://www.industrial-needs.com/
Manual
PCE-360 power analyzer

[email protected]
2
CONTENTS
Title Page
I. SAFETYINFORMATION ....................................................................................................................1
II. INTRODUCTION FEATURE .........................................................................................................4
III. SPECIFICATIONS ....................................................................................................................................................... 4
3-1 Environment Conditions .........................................................................................................................................................................................................................................4
3-2 Safety Specifications ..........................................................................................................................5
3-3 General Specification ...................................................................................................... 5
3-4 Electrical Specification ......................................................................................................................7
IV. PARTS & CONTROLS .....................................................................................................................10
4-1 Description of Parts & Control keys ...................................................................................................10
4 - 2 D e s c r i p t i o n o f D i s p l a y ...............................................................................................................................................................................................................................................1 2
V. OPERATINGINSTRUCTION ........................................................................................................15
5-1 AC Current Adaptor ............................................................................................................................ 15
5-2 Single-Phase 2-Wire (1P2W) Power System Measurement ...........................................................................17
5-3 Single-Phase 3-Wire (1P3W) Power System Measurement ...............................................................20
5-4 Three-Phase 3-Wire (3P3W) Power System Measurement ................................................................23
5-5 Three-Phase 4-Wire (3P4W) Power System Measurement ................................................................26
5-6 Only One Current I4 Measurement ........................................................................................ 29
5-7 Manual Data Memory and Read Function Operation ........................................................................29
5 - 8 A u t o D a t a l o g g i n g F u n c t i o n O p e r a t i o n ...............................................................................................................................................................................................................................................................................................3 0
5-9 Phase Sequ ence Measurement .............................................................................................................................................................................3 1
5-10 Voltage, Current Waveform and Harmonic Analyzer ................................................................ 31
5-11 Disable Auto Power Off Function ....................................................................................................32
VI. MAINTENANCE ...............................................................................................................................................................32
6-1 General Maintenance .........................................................................................................................32
6-2 Battery Replacement ..........................................................................................................................32
VII. RS-232 INTERFACE, SOFTWARE INSTALLATIONAND OPERATION ...................................33

1. SA
F
This Instr
u
manner a
n
read the f
o
•
Dur
dea
und
• Do
n
• Us
e
wit
h
• To
a
spe
c
• Us
e
met
SAFE
T
F
ETY INF
O
u
ction Man
u
n
d for main
t
o
llowing saf
e
ing high v
o
th, as well
erstand its
c
n
ot use the
e
extreme
c
h
the condu
c
a
void dama
g
c
i
f
ications.
e
the mete
e
r
may be i
m
T
Y SYMBO
L
•Cauti
•This
topic
s
•This
m
befo
r
•Dan
g
•Mete
r
Whe
n
•Com
p
O
RMATIO
N
u
al provide
s
t
aining it in
e
ty informat
o
ltage mea
s
as damage
c
ontents be
f
meter or te
s
c
aution wh
e
c
tor could re
g
es to the
m
r only as
m
paired.
L
S
on refers to
symbol is
a
s
before usi
n
m
ark indica
t
r
e using the
g
erous volta
g
r
is prot
e
n
servicing
p
ly with IEC
N
s
informatio
n
safe operat
ion.
D
s
urement, i
n
to the me
t
f
ore using th
D
s
t leads if th
e
e
n working
sult in elect
r
m
eter, do no
t
specified i
n
this manua
a
ffixed to t
h
n
g relevant
f
t
es explana
t
meter.
g
es.
e
cted thro
u
, use only
s
61010-1, 2
n
n
and warni
ing conditio
D
ANG
E
n
correct me
t
er. Pleas
e
e meter.
D
ANG
E
e
y look da
m
around b
a
r
ic shock.
t
exceed th
e
n
this ma
n
l before usi
n
h
e meter w
h
f
unctions of
t
ion, which
i
u
ghout by
s
pecified r
e
n
d edition
ngs essent
i
n. Before u
s
E
R
asu
r
ement
e
read this
m
E
R
m
aged.
a
re conduc
t
e
maximum l
n
ual, other
w
n
g the mete
r
h
ere the o
p
the meter.
i
s particular
l
double i
n
e
placement
i
i
al for oper
a
s
ing this m
e
procedures
m
anual car
e
t
ors or bus
imits of the
w
ise, the
p
r
.
p
erator sho
u
l
y important
n
sulation
o
parts.
i
nfo@tursdalete
c
a
ting this m
e
e
ter, be sur
e
could resu
e
fully and b
e
bars, Acci
input value
s
pr
otection p
r
u
ld consult
that the us
e
o
r reinforc
e
c
hnicalservices.c
o
e
te
r
in a sa
f
e
to careful
lt in injury
e
sure that y
dental cont
a
s
shown in t
r
ovided by t
correspond
i
er
should r
e
e
d insulati
o
o
.uk
3
f
e
ly
or
ou
a
ct
he
he
i
ng
e
ad
o
n.

DA
N
W
A
CA
U
NO
T
NOTES O
N
In order t
o
below.
 Install
a
 The me
t
 Do not
conden
s
the met
e
 The me
t
a very
d
 Do not
u
occur e
x

Before
 To prev
e
wet.
 When
of elect
r
 Conne
c
 To prev
 In orde
r
b
efore
c
N
GER: Indic
a
acci
d
A
RNING: In
d
U
TION: Indi
T
E: Denotes i
t
N
USE
o
ensure safe
a
tion
t
e
r
is design
e
store or use
t
s
ation, if exp
o
er
may no lo
n
t
e
r
does not
c
d
usty environ
m
u
se the unit
w
x
plosion.
use
e
nt electric s
h
working w
r
ical safety
g
c
ting meter
ent electric s
h
r
to prevent
e
c
onnecting th
e
a
tes that inc
o
d
ent resulting
d
icates that i
n
ser
i
cates that inc
t
ems of advi
c
operation a
n
e
d for indoo
r
t
he meter wh
e
o
sed to such
c
n
ger satisfy i
t
c
onstruct to b
e
m
ent or in o
n
w
here it may
b
h
ock, do not
a
ith live cir
c
g
ear such as
h
ock, turn th
e
lectrical sho
c
e
line to be
m
o
rrect operati
o
in death or s
n
correct oper
a
i
ous injury t
o
orrect operat
i
c
e related to p
n
d to obtain
m
r
use and can
e
re it will be
c
onditions, t
h
t
s specificati
o
e
waterproof
n
e where will
e exposed to
a
llow the met
e
c
uits, take
a
rubber glov
e
e power off
b
c
k and short
m
easured to t
h
o
n presents e
x
e
r
ious injury
a
tion present
s
o
the user.
i
on presents
p
erfo
r
mance
o
m
aximum per
f
CAUT
I
be safely us
exposed to
d
h
e meter ma
y
o
ns.
or dustproof
,
get wet.
corrosive or
e
WAR N
er
to become
a
ll suitable
e
s, rubber bo
o
WAR
N
b
efore conne
c
– circuit acc
h
e voltage in
p
x
treme dang
e
to the user.
s
significant
d
p
ossibility o
f
of
the meter o
r
f
ormance fro
I
ON
ed at temper
a
d
irect sunlig
h
y
be damage
d
,
so do not us
e
xplosive ga
s
ING
wet and do
n
precautions
o
ts, and safet
y
N
ING
c
ting the test
idents, shut
o
p
ut terminals
.
i
e
r of
d
anger of ac
c
f
injury to the
r
to its corre
c
m the meter,
a
tures rangin
h
t, high temp
e
d
, the insulat
e it in
s
. The meter
m
n
ot use the un
i
against acci
y
helmets.
leads and th
e
o
ff the powe
r
.
i
nfo@tursdalete
c
c
ident resulti
n
user or dam
a
c
t operation.
observe the
c
g f
r
om 0℃t
o
e
rature, high
h
ion may det
e
m
ay be dam
a
i
t when your
dents, inclu
d
e
n take meas
u
r
to the line t
o
c
hnicalservices.c
o
n
g in death o
r
a
ge to the me
t
c
aution liste
d
o
40℃.
h
umidity, or
e
riorate, and
a
ged, or may
hands are
d
ing the use
ur
ements.
o
be measur
e
o
.uk
4
r
t
er.
d
e
d

 The m
e
means
t
connect
To avoid
The jaws
connectio
the outpu
t
 Follow
a
 Follow
a
 Obey p
o
 Never a
 Always
 Remov
e
 Make c
o
 Connec
 Route t
e
II. INTRODUC
T
The sym
p
equipmen
t
decreased
Use pow
e
running,
harmonic
s
optimal u
p
 10 displ
a
time.
 4 curre
n
 Measur
e
 All Tru
e
KVAh
m
 Phase s
e
 Backlig
h
 Manual
 Data lo
g
 RS-232
 Easy-to
-
 Light w
e
e
asurement i
n
t
hat the othe
r
both termin
a
electrical s
h
of alligator
ns to feeder
c
t
side of a cir
a
ll legal req
u
a
ll instructio
n
o
sted instruc
t
ssume that a
set up the m
e
e
all test lead
s
o
nnections t
o
t the ground
e
st leads care
T
ION FEATU
R
p
toms of p
o
t
failure, ov
e
productivity
e
r analyzer
troubleshoo
t
s
, optimize
p
grades.
a
y Easy-to-v
i
n
t probe inclu
e
s single-pha
s
e
-RMS sensi
n
m
easurement
e
quence indi
c
h
t display fu
n
Data Memo
r
g
ging (504K
b
optical inter
fa
-
use key ope
r
e
ight and po
r
n
put and sy
n
r
is exposed
a
ls.
h
ock and / o
r
clips can c
r
c
onductors
o
cuit breaker
a
u
irements.
n
s in the ma
n
t
ions.
circuit is de-
e
e
asurement f
i
s
that are not
o
the meter fi
r
lead first, t
h
f
ully.
R
E
o
or power
q
e
r-heating o
f
and frustrat
e
to power
q
t
problems
power syst
e
i
ew LCD sc
r
e
ding for mea
s
e 2-wire, si
n
n
g , V, A, K
W
s.
ca
tor functio
n
n
ction.
r
y and Read (
b
yte memor
y
fa
ce with thre
e
r
ation.
r
table design.
n
chronizing
i
it is live, an
d
r
meter dam
a
r
eate a sh
o
o
r bus
b
ars
a
s possible a
s
n
uals.
e
nergized, c
h
i
rst, then con
n
in use.
r
st, before co
n
h
en the volta
g
q
uality inclu
d
f
component
s
e
d personnel.
q
uality trou
b
quickly, i
m
e
m perfo
r
ma
n
e
en, and is c
a
suring a neu
t
n
gle-phase 3-
w
W
, KVAR, K
V
n
.
99 sets).
y
, 12,000 sets
e
phase volta
g
CAUTIO
N
i
nput are no
t
d
there is a
d
WARNIN
G
a
ge, use cau
t
o
rt circuit
be
at elevate
d
s
you can, w
h
h
eck it first.
n
ect the test
l
n
necting lea
d
g
e leads and
d
e intermitt
e
s
for no app
a
le shooting
m
prove pow
e
n
ce, improv
e
a
pable of sho
w
t
ral line curre
n
w
ire, three-p
h
V
A, PF, θ, Hz,
per block, to
g
e / current
w
N
t
isolated fr
o
d
anger of ele
G
t
ion when c
o
e
tween clos
e
d
potentials.
W
h
ich can prov
i
l
eads to the c
i
d
s to a live ci
r
the current
p
e
nt lock-ups
a
rent cause,
can help
y
e
r efficient,
e
power qua
l
w
ing many p
n
t.
h
ase 3-wire
a
KWh, KVA
R
tal 20,000 se
t
w
aveform dis
p
i
o
m each oth
e
ctric shock.
o
nnecting tes
t
e
ly spaced l
i
W
henever, p
l
i
de better sh
o
i
rcuit.
r
cuit.
pr
obe, Disco
n
and resets,
etc. The ult
i
y
ou keep yo
manage e
n
l
ity and anal
y
ower quality
a
nd three-pha
R
h and
t
s).
p
lay and har
m
i
nfo@tursdalete
c
e
r. Connect
i
To avoid el
e
t
leads to liv
e
i
ve parts.
A
l
ease make
c
o
rt circuit pr
o
n
nect in reve
r
corrupted d
a
imate cost i
s
ur power s
y
n
ergy costs,
y
ze system
d
parameters
a
se 4-wire sy
s
m
onic analys
i
c
hnicalservices.c
o
i
ng either o
n
e
ct
r
ical shoc
k
e
component
s
A
void maki
n
c
onnections
t
o
tection.
r
se order.
a
ta, prematu
r
s
in downtim
y
stem up a
n
zero in
o
d
ata to desi
g
a
t the same
s
tems.
i
s.
o
.uk
5
n
e
k
,
s
.
n
g
t
o
r
e
e,
n
d
o
n
g
n

III. SPECIFI
C
3-1 Envir
o
 Altit
u
 Indo
o
 Rela
t
 Ope
r
3-2 Safet
y
Categor
y
: I
E
CAT III
Safety
C
Current
This m
a
keep th
e
Use of t
h
protect
i
Equipm
e
specifi
e
3-3 Gener
 Maxim
u
1000 V
r
 Maxim
u
 Maxim
u
 Numeri
c
 Battery
l
 Auto po
w
 Low ba
t
 Backlig
h
 Sampli
n
 Wavefo
r
 Current
 Operati
n
 Operati
n
 Temper
a
 Storage
 Dimensio
n
 Weight:
M
C
 Accessor
i
C
ATIONS
o
nment Co
n
u
de up to 20
0
or
use only
t
ively humid
i
r
ation am
b
ie
n
y
Specificat
y
Rating : 1
0
E
C 61010-1 2
n
: Measurem
e
C
haracterist
i
Clamps, Mo
d
a
nual contain
s
e
meter and i
t
h
is meter an
d
i
on provided
b
e
nt operatio
n
e
d by the ma
n
al Specific
a
u
m voltage b
e
r
ms
u
m rated wor
k
u
m current fo
r
c
al 10 displa
y
l
ife: approx.
5
w
e
r
off: app
r
t
tery indicati
o
h
t display ti
m
n
g rate : Appr
rm
and harm
o
probe jaw o
p
n
g temperatu
r
n
g humidity:
M
a
ture coeffici
e
temperature
a
n
s: Meter →
Current
p
M
eter includi
n
C
urrent p
r
ob
e
i
e:
n
ditions:
0
0 meters
i
ty 80% max.
n
t 0～40℃
ions
0
00V Measur
e
n
d Edition
e
nt category
i
i
cs :
d
el PCE AC
3
s
informatio
n
t
s accessorie
s
d
its accessor
i
b
y the equip
m
n
, the respons
n
ufacturer, th
e
a
tion
e
tween volta
g
k
ing voltage
f
r
current pro
b
y
: 10 display
5
0 hours.
r
ox. 30 minut
o
n: the
BT
i
m
e: Auto off
a
ox. 1 time p
e
o
nic analyze
r
p
ening diame
t
r
e: 0°C to 40
°
M
aximum re
31°C decrea
40°C (non-c
o
e
nt : 0.1 ⋅ (s
p
a
nd humidit
y
235(L) ⋅ 117
(
pr
obe →193
n
g battery →
e
→approx.
3
e
ment Categ
o
i
n which me
a
3
60, to be us
e
n
and warnin
g
s
in a safe co
n
i
es in a man
n
m
ent.
ible body sh
a
e
protection
p
g
e input term
i
f
o
r
current i
n
b
e: 1000 Ar
m
4 digit LCD
es.
i
s displayed
w
a
pprox. 30 se
c
er
2 seconds
(
r
: 64 samples
t
er: Cables
ψ
°
C
lative humid
i
se linearly to
o
ndensed).
p
ecified acc
u
y
: -10°C to 6
0
R.H. < 70
%
(
W) ⋅ 54(H)
m
(L) ⋅ 88(W) ⋅
4
approx. 730
g
3
33g
o
ry III, Pollu
t
a
su
r
ements p
e
e
d only with
t
g
that must b
e
n
dition.
n
er not speci
fi
a
ll be made a
w
p
rovided by t
h
i
nals and ear
t
n
put: 0.35 Vr
m
m
s
m
aximum re
a
w
hen the batt
e
c
onds.
(
Digital displ
a
per period.
ψ
40mm.
i
ty of 80% f
o
50% relativ
e
u
racy)
/
°C (<
1
0
°C
%
non-conde
n
mm
.
4
0(H)mm.
g
t
ion Degree
2
e
rfo
r
med in t
h
t
he Three-Ph
a
e
followed b
y
i
ed by the m
a
w
are that, if
t
h
e probe ass
e
t
h ground:
m
s
a
ding 9999.
e
ry voltage
d
a
y).
or
temperatur
e
e
humidity at
1
8 or >28°C)
n
sed.
i
2
.
h
e building i
n
a
se Power A
n
y
the user to
e
a
nufacture
r
m
t
he equipme
n
e
mbly may b
e
d
rops below t
h
e
s up to
i
nfo@tursdalete
c
n
stallation.
n
alyzer, Mo
d
e
nsure safe o
p
m
ay impair th
e
n
t is used in
a
e
impaired.
h
e operating
v
c
hnicalservices.c
o
d
el PCE-360.
p
eration and
t
e
manner not
v
oltage.
o
.uk
6
t
o

1.
2.
3
.
4
.
5
.
6
.
7
.
8
.
9
3-4 Elect
r
 AC V
o
Range
R
999.9V
 Displ
a
 AC C
u
Range
R
999.9A
 Displ
a
PCE-360 A
C
Category R
a
: IEC 6
1
Input : AC 1
Voltage test
Model no :
T
Manufactur
e
Category R
a
.
Alligator cl
i
Model no :
F
Manufactur
e
10A Max.
.
AC Adapto
r
Model : M
W
Input : 120
V
Manufactur
e
AC Adaptor
Model : M
W
Input : 230
V
Output : 12
V
Manufactur
e
.
Battery 1.5
V
.
Instruction
m
.
PC softwar
e
.
Carrying ca
s
. Optical RS
2
r
ical Specif
i
Ac
c
28
℃
The
o
ltage Trms
m
R
esolution
0.1V ±
(
a
y item : RM
u
rrent Trms
R
esolution (inc
l
0.1A ±
a
y item : RM
C
CURREN
T
a
ting : CAT I
I
1
010-1 2nd
E
000A maxi
m
lead x 4pcs
T
L 202I
er
: Hong Ka
i
a
ting : CAT I
I
i
p x 4pcs
F
C-A23
e
r : Fu Chyi
E
r
(IN-OUT Is
o
W
35-120030
0
V
AC 60Hz 6
.
e
r : MAW W
O
(IN-OUT Is
o
W
D48-12003
0
V
AC 50Hz
V
DC 300m
A
e
r : MAW W
O
V
“AA” ⋅ 8
m
anual ⋅ 1
e
CD-R ⋅ 1
s
e ⋅ 1
2
32 interface
i
cation
c
u
r
acy: ± (％
℃
( 64 ℉ to
8
current error
m
easureme
n
Accuracy
(
0.3%rdg±10d
g
(>50V)
S voltage va
l
Measureme
Accuracy
l
uding current
p
(0.5%rdg±15d
g
(>3A)
S current val
u
T
ADAPTOR
I
I 600V per I
E
E
dition and I
E
m
um. Output :
i
Co., Ltd.
I
I, 1000V, A
C
E
nterprise C
O
o
lated type,
I
0
.
1W
O
EI Enterpri
s
o
lated type, I
n
0
0GS
A
O
EI Enterpri
s
⋅ 1
of reading
＋
8
2 ℉ ) with re
l
is specified
w
n
t (V) :
Input
impedan
c
g
ts) 2MΩ
l
ue for each
c
nt (A) :
p
robe)
Curr
e
probe o
g
ts)
0.35m
V
u
e for each c
h
x 4pcs
E
C61010-1,
P
E
C61010-2-0
3
0.35mV/A
C
10A Max.
O
., Ltd. Cate
g
I
nput 120V
A
Ou
t
s
e CO., Ltd.
n
put 230V A
C
s
e CO., Ltd.
＋
number of
d
l
ative humidi
t
w
ithin the lar
c
eOverloa
d
p
rotectio
n
1000Vr
m
c
hannel.
e
nt
utput
Overlo
a
p
rotecti
V
/A 1000Ar
m
h
annel.
P
ollution De
g
3
2
g
ory Rating :
A
C 60Hz
t
put : 12V D
C
C
50Hz
d
igits) at 18
℃
t
y to 80％.
gest circle w
h
d
n
Nominal system fr
e
m
s Only 50H
z
a
d
on
Nomina
l
system fr
m
s Only 50H
z
i
g
ree2.
CAT III, 10
0
C
300mA
℃
to
h
ich can be
d
power
e
quency
z
or 60Hz
l
power
equency
z
or 60Hz
i
nfo@tursdalete
c
0
0V, AC
d
rawn inside
t
c
hnicalservices.c
o
t
he jaw.
o
.uk
7

[email protected]
8
 Active Power measurement P(KW) :
Range Resolution Accuracy
999.9KW 0.1KW ±1.0%rdg±20dgts
 Display items : Active power of each channel and its sum of multiple channels.
 Polarity display : For influx (consumption) No symbol, For outflow
(regenerative) “ - ”.
 Apparent Power measurement S (KVA) :
Ran
g
eResolution Accurac
y
999.9KVA 0.1KVA ±1.0%rdg±20dgts
 Measurement method : Calculate from RMS voltage U and RMS current I.
 Display item : Apparent power of each channel and its sum of multiple channels.
 Polarity display : No polarity.
 Reactive Power measurement Q (KVAR) :
Range Resolution Accuracy
999.9KVAR 0.1KVAR ±1.0%rdg±20dgts
 Measurement method : Calculate from apparent power S and active power P,
Q=
S 2  P
2 .
 Display item : Reactive power of each channel and its sum of multiple channels.
 Polarity display : For phase lag (LAG : current is slower than voltage) : No symbol.
For lead phase (LEAD : current is faster than voltage) : “-”
 Power Factor measurement (COS
ψ
) :
Ran
g
eResolution Calculate
d
Accu
r
ac
y
0 ~ +1 0.001 ±3dgt
 Measurement method: Calculate from apparent power S and active power P, PF = COS
ψ
= P / S
 Display item: Power factor of each channel and its sum of multiple channels.
 Phase angle measurement (
ψ
) :
Range Resolution Calculated Accuracy
+90°~ 0°
~
-90°0.1°±3dgt
 Measurement method : Calculate from power factor COSψ,
ψ
= COSPF.
 Display item : Phase angle of each channel and its sum of multiple channels.
 Polarity display : For phase lag (LAG : current is slower than voltage) : No symbol.
For phase lead (LEAD : current is faster than voltage) : “-”.
 Frequency measurement (Hz) :
Ran
g
eResolution Accurac
y
Measure
m
ent sou
r
ce
60HZ 0.1Hz ±0.1%rdg±2dgt Voltage U1 > 50V
 Measurable input range : > 50V
 Three Phase Sequence Detection :
Input voltage range Normal phase indication Reverse phase indication Measurement source
3P > 50V U1, U2 and U3

[email protected]
9
 Active Power Energy measurement (KWh) :
Range Resolution Active power
accu
r
ac
y
Timer interval Timer Accuracy
3.999KWh 0.001KWh
±1.0%rdg±20dgt
1 sec
±50ppm (25℃, 77℉ )
39.99KWh 0.01KWh
399.9KWh 0.1KWh
3.999MWh 0.001MWh
39.99MWh 0.01MWh
119.3MWh 0.1MWh
 Measurement display : Display all active power consumption energy (sum of absolute values).
 Apparent Power Energy measurement (KVAh) :
Range Resolution Apparent power
accu
r
ac
y
Timer interval Timer Accuracy
3.999KVAh 0.001KVAh
±1.0%rdg±20dgt
1 sec
±50ppm (25°C, 77°F)
39.99KVAh 0.01KVAh
399.9KVAh 0.1KVAh
3.999MVAh 0.001MVAh
39.99MVAh 0.01MVAh
119.3MVAh 0.1MVAh
 Measurement display : Display all apparent power energy (sum of absolute
values).
 Reactive Power Energy measurement (Kvarh) :
Range Resolution Reactive power
accu
r
ac
y
Timer interval Timer Accuracy
3.999Kvarh 0.001Kvarh
±1.0%rdg±20dgt
1 sec
±50ppm (25°C, 77°F)
39.99Kvarh 0.01Kvarh
399.9Kvarh 0.1Kvarh
3.999Mvarh 0.001Mvarh
39.99Mvarh 0.01Mvarh
119.3Mvarh 0.1Mvarh
 Measurement display : Display all reactive power consumption (sum of
absolute values).
 Harmonic measurement (use only PC on line analyzer)
Order Accuracy Harmonic Source No. of samples per period
1 ~ 31
±3%THD U1, U2, U3 > 80V
I1, I2, I3 > 50A 64
 Waveform (use only PC on line displayed)
Select phase A, B or C.
Select Voltage and current waveform output.

[email protected]
10
IV. PARTS & CONTROLS
4-1 Description of Parts & Control keys

2. Input fo
r
3. Plug for
4. Optical
R
5. LCD dis
p
6. WIRIN
G
7. ke
y
8. HOLD
k
9. key
10. PF key
11. Θkey :
12. Hz key
13. I4 ke
y
14. SET k
e
15 TIME
k
16. ∝
K
17. STA
R
18. STO
P
19. ME
M
20. REA
D
21. PO
W
22. ENE
R
23. KEY
L
24. ke
r
current pr
o
external A
C
R
S232 inter
f
p
lay.
G
key : Sele
c
singl
e
3P3
W
powe
r
meas
u
elect
r
y
: Phase seq
u
down this
k
Reverse p
h
k
ey : Data ho
l
annuncia
t
Press an
d
exit auto
: Backlight f
u
The bac
k
: Display me
is displ
a
Display me
a
: Display m
e
y
: Display
annuncia
t
e
y : Setting c
interval ti
m
k
ey : Displa
y
TIM
E
K
eys : Setting
control
k
R
T key : Star
t
P
key : Stop
a
M
ORY key :
c
D
key : Read
W
ER Ke
y
R
GY key : D
i
d
i
L
ock key :
L
L
y : Power on
1.
I
o
be jacks (I
1
C
adaptor po
w
f
ace output.
c
t the type o
f
e
-phase two-
w
W
2M (To
m
r
meter met
h
u
rement onl
y
r
ical system i
n
u
ence detectio
n
k
ey, it will di
s
h
ase
l
d function k
e
t
or is displ
a
d
hold dow
n
powe
r
off f
u
u
nction key,
p
k
light will s
w
asured powe
r
a
yed.
a
sured phase
a
e
asured frequ
e
measured I
4
t
or is display
e
urrent date
a
m
e setting m
o
y
current dat
e
E
key display
cur
r
ent date
a
k
eys.
t
auto datalo
g
a
uto datalogg
i
Manual dat
a
c
urrent dis
p
address num
b
manual me
m
y
: Display m
e
be displaye
d
i
splay total i
n
i
splayed.
L
ock all the f
u
OCK annun
c
-off control
k
I
nput for vo
l
1
, I2, I3, I4).
w
er supply i
f
electrical s
y
w
ire power l
i
m
easure thre
e
h
od, use this
y
.) and 3P4
W
n
cycles.
n
function ke
y
s
play phase d
e
e
y, press HO
L
a
yed, press
H
n
HOLD key
u
nction.
p
ress ke
y
w
itch off auto
m
r
factor valu
e
a
ngle value
c
e
ncy value c
o
4
current pr
o
e
d.
a
nd time fun
c
o
de for auto
d
e
and time c
o
current data
a
nd time, or
r
g
ging functio
n
i
ng function.
a
memory co
n
p
lay reading
b
e
r
is displa
y
m
ory data con
t
e
asured pow
e
d
in cycles.
n
tegrated po
w
u
nctions key,
c
iator is displ
a
k
ey.
l
tage termin
a
nput.
y
stem under t
e
i
nes), 1P3W
(
e
-phase thr
e
when meas
u
W
(To measur
e
y
. In a 3P4W
m
e
tection resul
t
L
D key to h
o
H
OLD key
a
then press
y
to turn on a
n
m
atically aft
e
e
control key,
c
ontrol key, t
h
o
ntrol key, th
e
o
be value c
o
c
tion key, pr
e
d
atalogging
u
o
ntrol key, p
r
a
nd time.
r
ecall manua
l
n
.
Press STA
R
n
trol key. P
r
into the
m
y
ed, total me
m
t
rol key.
er
value cont
r
w
er energy v
a
except
a
a
yed.
a
ls (U1, U2,
U
e
st, press W
I
(
To measure
s
e
e-wire po
w
u
ring three-
p
e
three-phas
e
m
ode, press a
n
t
s as follows :
o
ld data, the
H
a
gain to exi
t
key turn
o
n
d off of bac
k
er
30 second
s
the PF annu
n
h
e ψannunc
i
e
Hz annunc
i
o
ntrol key,
t
e
ss SET key
t
u
se.
r
ess and hol
d
l
data memo
r
R
T key to res
u
r
ess MEMO
R
m
emory, the
m
ory size is
9
r
ol key, the P
a
lue control
k
a
nd keys
,
i
U
3, N).
I
RING key t
o
s
ingle-phase
t
w
er line with
p
hase powe
r
e
four- wire
p
n
d hold
Normal pha
s
H
OLD
t
Hold funct
i
o
n the meter
,
k
light.
s
.
n
ciator
i
ator is displ
a
i
ator is displ
a
t
he I4
t
o enter curr
e
d
down
r
y to read me
m
u
me recordin
g
R
Y key each
M annun
9
9 sets.
t123, Qt123
a
k
ey, the three
h
,
the
i
nfo@tursdalete
c
o
select 1P2
W
t
hree-wire p
o
out neutral,
r
with 2-c
u
p
owe
r
lines
w
s
e
i
on.
,
the “ ”
m
a
yed.
a
yed.
e
nt time setti
n
m
ory data in
g
in current
d
time to s
t
ciator and
a
nd St123 an
h
annunciato
r
c
hnicalservices.c
o
W
(To measu
r
o
we
r
lines),
using the t
w
u
r
r
ent probe
w
ith neutral)
m
ark disappe
a
n
g mode an
d
cycles
d
ata sets.
t
ore one s
e
the memo
r
n
unciators w
r
s will be
o
.uk
11
r
e
w
o
a
r,
d
e
t
r
y
ill

[email protected]
12
4-2 Description of Display
: Auto power off indication.
HOLD : Display hold mode.
LOCK : Set key lock mode.
BT : Low battery indication.
ψ : Phase angle display.
: Phase angle unit.
1P2W : Measure single-phase two-wire power line indication.
1P3W : Measure single-phase three-wire power line indication.
3P3W2M : Measure three-phase three-wire power line indication.
3P4W : Measure three-phase four-wire power line indication.
P1 : Phase 1 active power measured display indication.
P2 : Phase 2 active power measured display indication.
P3 : Phase 3 active power measured display indication.
Pt: Total active power measured display indication and total active energy measured display indication.
KW : Active power unit.
KWh, MWh : Active energy unit.
PF1: Phase 1 power factor measured display. PF2: Phase 2 power factor
measured display. PF3: Phase 3 power factor measured display. PFt: Total
power factor measured display.
I4 : Current probe 4 current measured display.
Hz : Frequency unit.
DATA No.
⋅⋅ : Last manual datalogged memory address number indication (01~99).
M : Manual datalogged indicate on, M displays one time store one sets data into the memory.
DATA R No.
⋅⋅ : Recall manual datalogged address number indication, the
memory data displayed for read.
DATA M
⋅⋅ : Auto datalogging indication, M disappears one time store one sets data into the memory .
01 ~ 10 : Maximum 10 memory blocks can be use, only 12,000
sets data can be stored in one block. Maximum 20,000 sets data can be stored.
FF : Memory full indication, if exceed 10 memory blocks or exceed 20,000 stored data.

Q1 : Phas
e
measured d
i
Qt : Total r
e
Kvar : Rea
c
Kvarh, M
v
S1 : Phase
measured d
i
St : Total a
p
KVA : App
a
: Apparent
e
TIME : Cu
Y-M D-h
m
INTV : Au
t
START : E
STOP : En
e
U1, V, A :
1
U1, V, A,
U
U12, V, I1,
U1, V, A,
U
V : Voltage
A : Current
1000V : Vo
l
250A, 500
A
V
. OPERA
T
 If poss
equipm
e
 Vo l t a g
e
insulat
e
 Do not
c
 Always
 Make
c
 Conne
c
 Remov
e
e
1 reactive
i
splay indica
t
e
active powe
r
c
tive power
u
v
arh : Reacti
v
1 apparent
i
splay indica
t
p
parent powe
a
rent power
u
e
nergy unit.
rrent data an
d
m
-s : Date an
d
t
o dataloggin
g
nergy calcul
a
e
rgy calculat
i
1
P2W phase
U
U
2, V, A : 1P3
me
a
A, U23, V, I
2
U
2, V, A, U3,
V
unit.
unit.
l
tage range i
n
A
, 1000A : C
u
T
ING INSTR
U
ible, before
e
nt’s power.
e
input conne
e
d.
c
onnect the
u
set up the m
e
c
onnections
t
c
t the ground
e
all test lead
power meas
u
t
ion. Q3 : Ph
a
r
measured
d
u
nit.
v
e energy un
i
power meas
u
t
ion. S3 : Ph
a
r
measured
d
u
nit. KVAh :
d
time indica
t
d
time displa
y
g
interval ti
m
a
ting start ti
m
i
ng stop time
U
1 voltage a
n
W phase U1
,
a
sured displa
y
2
, A: 3P3W
2
indicat
i
V
, A : 3P4W
indica
t
n
dication.
u
rrent range
i
U
CTION
connecting
t
ctors U1 to
U
u
nnecessary
n
e
asurement
fi
t
o the instru
m
lead first, t
h
s that are not
u
red display
a
se 3 reactiv
e
d
isplay indica
t
i
t.
u
red display
a
se 3 appare
n
d
isplay indic
a
Apparent en
e
t
ion.
y
ed.
m
e setting ind
m
e indication.
indication.
n
d current pr
o
,
U2 voltage
a
y
indication.
2
M phase U1
2
i
on.
phase U1, U
2
t
ion.
i
ndication (
A
t
he meter to
U
3 are com
m
n
umber of co
r
fi
rst, then con
m
ent first,
be
h
en the volta
g
in use.
indication.
Q
e
power mea
s
t
ion and tota
l
indication.
n
t power mea
s
a
tion and tota
l
e
rgy unit. M
V
ication.
o
ve I1 meas
u
a
nd current p
2
, U23 volta
g
2
, U3 voltag
e
A
utoranging)
CAUTIO
N
the electric
a
DANGE
R
m
on for input
r
ds.
WARNIN
G
nect the test
l
e
fore connec
t
g
e leads and
Q
2 : Phase
s
ured display
l
reactive en
e
S2 : Phase
2
s
ured displa
y
l
apparent en
e
V
Ah
u
red display i
n
robe I1, I2
g
e and curre
n
e
and current
N
a
l equipment
R
connector
N
G
l
eads to the c
t
ing leads to
the current
p
i
2 reactive p
indication.
e
rgy measure
d
2
appa
r
ent
p
y
indication.
e
rgy measur
e
n
dication.
n
t probe I1, I
2
probe I1, I2,
to be tested
,
N
, each input
c
ircuit.
a live circui
t
p
robe, Disco
n
i
nfo@tursdalete
c
owe
r
d
display ind
i
p
ower
e
d display in
d
2
measured d
i
I3 measure
d
,
take off the
c
onnectors a
r
t
.
n
nect in reve
r
c
hnicalservices.c
o
i
cation.
d
ication.
i
splay
d
display
electrical
r
e not
r
se order.
o
.uk
13

※U1 mu
is the
measu
r
5-1 AC C
u
Safety I
n
To ens
u
 Read
 Use
feat
u
 Adhe
shoc
k
 Do n
o
 Befo
r
outp
u
insul
a
 Neve
 Use
e
in ele
c
 Use
c
To av
o
 Bef
o
and o
u
or w
e
 Do
n
Meas
u
 Cen
t
 Ma
k
 For
the C
u
Obser
v
 Avo
i
st be conne
c
main signa
l
r
ement fro
m
u
rrent Ada
p
n
formation
u
re safe opera
t
the operatin
g
the Current
u
res may not
p
re to local
a
k
and arc
b
l
a
o
t hold the Cu
r
r
e each use,
u
t cable insul
a
a
tion surroun
r use the cla
m
e
xtreme cauti
o
c
tric shock.
c
aution when
o
id possible
e
o
re each use
u
tput cable in
e
akened co
m
n
ot use a da
m
u
rement Co
n
t
er the condu
c
k
e sure the cl
a
optimal rea
d
u
rrent Clamp.
v
e the follo
w
i
d taking me
a
c
ted to volta
g
l
source of
m
U2, U3, I1,
p
to
r
R
e
t
ion and servi
c
g
instructions
Clamp onl
y
p
rotect you.
a
nd national
a
st injury w
h
r
rent Clamp
a
inspect the
a
tion. Also l
o
ding the jaw
s
m
p on a circ
u
o
n when wor
k
working wit
h
W
e
lectric shoc
k
, inspect th
e
sulating cov
e
m
ponents. Pa
y
m
aged Curre
n
n
siderations
c
to
r
inside th
a
mp is perpe
n
d
ing, make
w
ing guidelin
e
a
surements cl
o
g
e source d
u
the whole
m
I2 and I3.
e
ad First: S
a
c
e of the curr
e
before use a
n
y
as specifi
e
safety code
s
h
ere hazardo
a
nywhere bey
o
Cur
r
ent Cla
m
o
ok for loos
e
s
.
u
it with volta
g
k
ing around
b
h
voltages ab
W
arning
k
or personal
i
e
Current Cl
a
er
and for lo
o
y
particular
n
t Clamp. If
e Current Cl
a
n
dicular to th
e
sure the co
n
e
s when mak
i
o
se to other
c
u
ring the me
a
m
eter meas
u
a
fety Infor
m
e
nt clamp, fol
l
n
d follow all
e
d in the o
p
s
. Individu
a
us live cond
u
o
nd the tactil
e
m
p. Look for
e
or weakene
d
g
es higher th
a
b
are conduct
o
ove 60V or 3
i
njury:
a
mp. Look
o
se
attention t
o
a clamp is d
a
a
mp jaw.
e
conductor.
n
ductor is p
o
i
ng measure
m
c
urrent carry
i
a
surement
o
u
ring syste
m
m
ation
l
ow these ins
t
safety instru
c
p
erating inst
r
a
l protective
u
ctors are ex
p
e
barrier, see
F
cracks or mi
s
d
component
s
a
n 600V CA
T
or
or bus
b
ars.
0V ac. Suc
h
for cracks o
r
o
the insul
a
a
maged, tape
o
sitioned be
t
m
ents :
ng conducto
r
i
o
f U2, U3, I1
m
. Otherwis
e
t
ructions:
c
tions.
r
uctions, oth
e
equipment
m
p
osed.
F
igure 1.
s
sing portion
s
s
. Pay partic
u
T
III.
Contact wit
h
h
voltages po
s
r
missing po
r
a
tion surrou
n
it shut to pr
e
t
ween the ali
r
s.
i
nfo@tursdalete
c
, I2 and I3
e
you could
e
rwise the cl
a
m
ust be us
e
s
of the clam
p
u
lar attention
h
the conduc
t
s
e a shock ha
z
r
tions of the
n
ding the cla
m
e
vent uninte
n
gnment mar
k
c
hnicalservices.c
o
, because
U
not have a
n
a
mp’s safety
e
d to preve
n
p
housing or
to the
t
o
r
could res
u
z
ard.
clamp housi
n
m
p jaws.
n
ded operatio
n
k
s on the jaw
s
o
.uk
14
U
1
n
y
n
t
u
lt
n
g
n
.
s
of

Operation
To use the
Figure 1.
1. Connect
2. The arr
o
3. Connect
To avoi
d
Figure
1
5-2 Singl
e
Applicat
i
R
 Trouble
s
 Measuri
n
 Measuri
n
 Measuri
n
 Measuri
n
 Measuri
n
 Measuri
n
 Measuri
n
 Measuri
n
 Recordi
n
AC Curren
t
the clamp c
a
o
w on the top
the current
c
d
shock or
p
1
.
e
-Phase 2-
W
i
on :
R
eceptacle b
r
s
hooting electri
c
n
g line rms vol
t
n
g line rms cur
r
n
g frequency.
n
g voltage har
m
n
g current har
m
n
g voltage wa
v
n
g current wav
e
n
g the loa
d
on
a
n
g the load on
a
t
Adaptor, r
e
a
ble to the in
s
of the clamp
c
lamp jaws a
r
W
p
ersonal inju
r
W
ire (1P2W
)
r
anch circuit
c
al distribution
t
age.
r
ent.
m
onics (use PC
)
m
onics (use PC
)
v
eform (use PC
)
e
form (use PC
)
a
transfo
r
mer.
a
transformer.
e
fer to “Mea
s
s
trument.
must face to
r
ound the co
n
W
arning
r
y, keep fing
e
)
Power Sy
s
system. 
M

M
)
.
)
.
)
.
)
s
urement Co
n
wards the lo
a
n
ducto
r
to be
e
rs behind t
h
s
tem Meas
u
Ligh
t
M
easuring curr
e
M
easuring pow
e
n
siderations
”
a
d of the circ
u
measured.
h
e tactile
b
ar
r
u
rement
t
ing loads
e
nt harmonic (u
er
on single
p
h
a
i
”
and
u
it.
r
ier, see
se PC).
a
se loads.
i
nfo@tursdalete
c
c
hnicalservices.c
o
o
.uk
15

[email protected]
16
A : Line, N : Neutral, G : Ground,  Face the arrow toward the load.
1P2W Wiring Connection Diagram
1. Press key to turn on the meter.
2. Press WIRING key to select the 1P2W electrical system under test, the 1P2W annunciator will be displayed.
3. Connect the voltage test leads and current probe to the meter.
 Connect the black voltage test lead to the “N” terminal.
 Connect the red voltage test lead to the “U1” terminal.
 Connect the I1 current probe output plug to the “I1” jack.
 If you want to measure ground leakage current, connect the I4 current probe output plug to the “I4” jack.
4. Connect the voltage test leads and current probe to the electrical equipment to be tested.
CAUTION
 If possible, before connecting the voltage test leads and current probe to the electrical equipment to be
tested, take off the electrical equipment’s power.
 Connect the black voltage test alligator to the Neutral Line “N”.
 Connect the red voltage test alligator to the Line “A”.
 Press I1 current probe trigger to open the jaw and fully enclose the Line “A”.  If you want to measure ground
leakage current, press I4 current probe the trigger to open the jaw and fully enclose the Ground Line “G”.
5. Frequency (Hz), Phase Angle (Θ), Ground Leakage Current (I4) and Power
Factor (pF) measurement :
 Hz : Press “Hz” key, PF1 will show “Hz”. Press “PF” key to exit.
 Θ: Press “Θ” key, PF1 will show “ ψ ”. Press “PF” key to exit.
 I4 : Press “I4” key, PF1 will show “I4”. Press “PF” key to exit.
 pF : Press “PF” key.
6. Energy measurement:
 Press “ENERGY” key, the “Pt”, “Qt”, “St” and “PFt” or “ ψ t” annunciator
and energy integrate start time are displayed. The energy integrate value and the current time will be continuous
accumulate.
a). KW displays KWh
b). KVAR displays KVARh c). KVA displays KVAh

[email protected]
17
 Press “ STOP” key to stop energy accumulated and the HOLD annunciator is displayed.
 Press ∝ key to exit the energy measurement.
※U1 must be connected to voltage source during the measurement of U2, U3, I1, I2 and I3, because U1
is the main signal source of the whole meter measuring system. Otherwise you could not have any
measurement from
U2, U3, I1, I2 and I3.
5-3 Single-Phase 3-Wire (1P3W) Power System Measurement
Application : Same as 1P2W power system measurement.
A, B : Line, N : Neutral, G : Ground,  Face the arrow toward the load.

[email protected]
18
1. Press key to turn on the meter.
2. Press WIRING key to select the 1P3W electrical system under test, the 1P3W annunciator will be displayed.
3. Connect the voltage test leads and current probe to the meter.
 Connect the black voltage test lead to the “N” terminal.
 Connect the red voltage test lead to the “U1” terminal.
 Connect the yellow voltage test lead to the “U2” terminal.  Connect the I1 current probe
output plug to the “I1” jack.
 Connect the I2 current probe output plug to the “I2” jack.
 If you want to measure ground leakage current, connect the I4 current probe output plug to the “I4” jack.
4. Connect the voltage test leads and current probe to the electrical equipment to be tested.
CAUTION
 If possible, before connecting the voltage test leads and current probe to the electrical equipment to be
tested, take off the electrical equipment’s power.
 Connect the black voltage test alligator to the neutral line “N”.
 Connect the red voltage test alligator to the line “A”.
 Connect the yellow voltage test alligator to the line “B”.
 Press I1 current probe trigger to open the jaw and fully enclose the Line “A”.
11 Press I2 current probe trigger to open the jaw and fully enclose the Line “B”.
12 If you want to measure ground leakage current, press I4 current probe trigger
to open the jaw and fully enclose the ground line “G”.

[email protected]
19
5. Press POWER key to select (P1, Q1, S1, PF1), (P2, Q2, S2, PF2) and (Pt, Qt, St, PFt) measured values.
6. Frequency (Hz), Phase Angle (Θ), Ground Leakage Current (I4) and Power
Factor (pF) measurement :
 Hz : Press “Hz” key, PF1 will show “Hz”. Press “PF” key to exit.
 Θ: Press “Θ” key, PF1 will show “ ψ ”. Press “PF” key to exit.
 I4 : Press “I4” key, PF1 will show “I4”. Press “PF” key to exit.
 pF : Press “PF” key.
7. Energy measurement :
 Press “ENERGY” key, the “Pt”, “Qt”, “St” and “PFt” or “ ψ t” annunciator and
energy integrate start time are displayed. The energy integrate value and the current time will be continuous
accumulate.
a). KW displays KWh
b). KVAR displays KVARh c). KVA displays KVAh
 Press “ STOP ” key to stop energy accumulated and the HOLD annunciator is displayed.
 Press ∝ key to exit the energy measurement.
※U1 must be connected to voltage source during the measurement of U2, U3, I1, I2 and I3, because U1
is the main signal source of the whole meter measuring system. Otherwise you could not have any
measurement from
U2, U3, I1, I2 and I3.

[email protected]
20
5-4 Three-Phase 3-Wire (3P3W) Power System Measurement
Application :
Induction motors without adjustable speed drive. Induction motors with adjustable speed drive.
 Checking voltage unbalance.  Checking current on phases.
 Checking current and current unbalance.  Measuring frequency of motor current.
 Measuring power in 3-phase balanced and
unbalanced system.
 Measuring power factor of 3-phase motors.
 Measuring voltage harmonics (use PC).
Unbalance factor :
When the load of the specified phase becomes too heavy due to fluctuations in loads connected to each power
line phases, or when operating on uneven device, the voltage and current waveforms become distorted, causing
voltage drops, they can cause voltage unbalance, reverse phase to neutral voltage, and harmonics may cause
accidents such as uneven motor rotation, circuit breaker trips, and over load heating in the transformer.
1. Press key to turn on the meter.
2. Press WIRING key to select the 3P3W2M electrical system under test, the 3P3W2M annunciator will be
displayed.
3. Connect the voltage test leads and current probe to the meter.
 Connect the black voltage test lead to the “N” terminal.
 Connect the red voltage test lead to the “U1” terminal.
 Connect the yellow voltage test lead to the “U2” terminal.  Connect the I1 current probe
output plug to the “I1” jack.
 Connect the I2 current probe output plug to the “I2” jack.
4. Connect the voltage test leads and current probe to the electrical equipment to be tested.