PCE Instruments PCE-HWA 30-ICA User manual

© PCE Instruments
PCE-HWA 30 Anemometer
User Manual
User manuals in various languages (français,
italiano, español, português, nederlands, türk, polski,
русский, 中文) can be found by using our
product search on: www.pce-instruments.com
Last change: 30 December 2021
v1.0
English

© PCE Instruments
Contents
1Safety notes........................................................................................... 1
2Specifications........................................................................................2
3Delivery scope.......................................................................................2
4Device description ................................................................................ 3
4.1 Display description........................................................................................................... 5
4.2 Numeric keypad............................................................................................................... 6
5Switching the meter on and off ...........................................................6
5.1 Automatic power off.......................................................................................................... 6
6Making a measurement ........................................................................ 7
6.1 Beaufort scale.................................................................................................................. 8
6.2 Setting the flow unit.......................................................................................................... 8
6.3 Setting the temperature unit............................................................................................. 8
7Volume flow measurement ..................................................................8
7.1 Setting the unit of the volume flow measurement ............................................................. 8
7.2 Area specification for volume flow measurement.............................................................. 9
7.3 2/3 MAX volume flow measurement................................................................................. 9
8Lowest, highest and average measured value ..................................9
8.1 Highest measured value................................................................................................... 9
8.2 Average reading..............................................................................................................10
8.3 Lowest measured value ..................................................................................................10
8.4 Freeze measured value...................................................................................................10
8.5 Recording the measured values......................................................................................11
9Software............................................................................................... 12
10 Contact............................................................................................... 16
11 Disposal ...............................................................................................16

© PCE Instruments
1
1 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The
device may only be used by qualified personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
•The device must only be used as described inthis instruction manual.If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
•The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specifications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
•Do not expose the device to shocks or strong vibrations.
•The case should only be opened by qualified PCE Instruments personnel.
•Never use the instrument when your hands are wet.
•You must not make any technical changes to the device.
•The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,
no abrasives or solvents.
•The device must only be used with accessories from PCE Instruments or equivalent.
•Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
•Do not use the instrument in explosive atmospheres.
•The measurement range as stated in the specifications must not be exceeded under
any circumstances.
•Non-observance of the safety notes can cause damage to the device and injuries to
the user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.

© PCE Instruments
2
2 Specifications
Unit
Measurement
range
Resolution
Accuracy
Wind speed
m/s
0.3 ... 30.0 m/s
0.01 m/s
±3 % ±0.1 m/s
of reading
ft/min
60 ... 8800 ft/min
0.01, 0.1, 1 ft/min
±3 % ±20 ft/min
of reading
knots
0.6 ... 88.0 knots
0.01 knots
±3 % ±0.2 knots
of reading
km/h
1.0 ... 140.0 km/h
0.01 km/h
±3 % ±0.4 km/h
of reading
mph
0.7 ... 100 mph
0.01 mph
±3 % ±0.2 mph
of reading
Volume flow
CMM (m³/min)
0 ... 999900 m³/min
0.001 ... 100 m³/min
CFM (FT³/min)
0 ... 999900 ft³/min
0.001 ... 100 m³/min
Temperature measurement
°C
0 ... 45 °C
0.1 °C
±1.0 °C
°F
32 ... 113 °F
0.18 °F
±1.8 °F
Further specifications
Probe length
270 ... 990 mm / 10.63 … 38.98", telescopic
Interface
Micro USB
Data storage
960 measured values
Power supply
4 x 1.5 V AAA battery
Power consumption
15 ... 20 mA without backlight
20 ... 25 mA with backlight
0 ... 8 µA standby
Flat battery indicator
<4.5 V
Operating conditions
0 ... 50 °C / 32 ... 122 °F, 40 ... 80 % RH,
non-condensing
Storage conditions
-20 ... 60 °C / -4 ... 140 °F, <80 % RH,
Non-condensing
Dimensions
70 x 194 x 35 mm / 2.7 x 7.6 x 1.3"
Weight
400 g / 14 oz
3 Delivery scope
1 x anemoeter PCE-HWA 30
1 x micro USB cable
1 x carrying case
1 x user manual

© PCE Instruments
3
4 Device description

© PCE Instruments
4
No.
1
Description
1
Shift key between:
- MAX: highest measured value
- AVG: average measured value
- MIN: lowest measured value
Numeric keypad digit: 1
2
Enter key (ENTER)
2/3 V Max key
Wind direction calibration key
Numeric keypad digit: 2
3
Freeze display (HOLD)
Numeric keypad digit: 3
4
Select between wind speed and volume flow
Numeric keypad digit: 4
5
Unit switch key (UNIT) (short press)
Switching the key tone on and off (long press)
Numeric keypad digit: 5
6
On-off switch (long press)
Numeric keypad digit: 6
7
Setting the temperature unit (short press)
Select between temperature and humidity display (long press)
Numeric keypad digit: 7
8
Setting the area for volume flow measurement (AREA)
Setting the storage interval (SAMPLE)
Numeric keypad digit: 8
9
Opening the memory menu (read, save, record)
Numeric keypad digit: 9
10
Saving a measured value
Opening the recording menu
Numeric keypad digit: 0
11
Clearing the memory
Numeric keypad digit: .
12
USB interface for data transfer and battery charging
13
LC display
14
Connection for the flow sensor
15
Connection cable of flow sensor
16
Handle of flow sensor
17
Sensor technology of flow sensor

© PCE Instruments
5
4.1 Display description

© PCE Instruments
6
No.
1
Description
1
2/3 of the maximum display for volume flow measurement
2
Display of the highest measured value
3
Display of the average reading
4
Display of the lowest measured value
5
Display of the saved measured value
6
Measured value is saved
7
Clearing the memory
8
Data connection with a PC has been established
9
Battery is being charged or is discharged
10
Measured value frozen
11
Beaufort scale
12
Units for speed display
13
When displayed, the flow value is shown
14
Displayed measured value must be multiplied by 100
15
When displayed, the volume flow is shown
16
Measured value
17
Unit: CFM (FT³/min)
18
Unit: CMM (m³/min)
19
Display for temperature, area and memory
20
Unit
21
Indication that there is no saved data
4.2 Numeric keypad
It may happen that a numerical entry has to be made; for example, when entering the storage
interval. To enter this function, each key changes its function to a specific numeric key. For each
entry, all four cells must always be completed. A comma key is also available for volume flow
measurement.
5 Switching the meter on and off
To switch the meter on and off, press and hold the on/off key for at least two seconds.
5.1 Automatic power off
If no entry is made within five minutes after switching on, the meter switches itself off. To
deactivate this function, hold down the Enter key when switching on and switch on the meter. The
display shows "no" The automatic power off function is now deactivated. Now release all keys to
make a measurement. The automatic power off function always reactivates as soon as the meter
is switched off.

© PCE Instruments
7
6 Making a measurement
To make a measurement, align the flow sensor with the direction of the flow. An arrow on the
head of the sensor indicates the orientation in relation to the wind flow. Wait for at least two
seconds for the reading to stabilise.

© PCE Instruments
8
6.1 Beaufort scale
The Beaufort scale is always active and shows the current wind force category
Wind force
Designation of the wind force
Designation of the sea state
(wind sea)
0
Calm
Completely calm, smooth sea
1
Light air
Calm, rippled sea
2
Light breeze
Mildly agitated sea
3
Gentle breeze
Mildly agitated sea
4
Moderate breeze
Slightly agitated sea
5
Fresh breeze
Moderately agitated sea
6
Strong breeze
Rough sea
7
Near gale
Very rough sea
8
Gale
Moderately high seas
9
Strong gale
High seas
10
Storm
Very high seas
11
Violent storm
Heavy sea
12
Hurricane
Exceptionally heavy sea
6.2 Setting the flow unit
To set the unit of the flow velocity, press the "UNIT" key. You can choose
between m/s, km/h, ft/min, knots and mps. The default setting is m/s.
6.3 Setting the temperature unit
To set the temperature unit displayed, press and release "°C/°F" once. You
can choose between °C and °F. The default setting is °C.
7 Volume flow measurement
For a volume flow measurement, first press the "VEL/FLOW" key
to select between velocity and volume flow measurement. This is
signalled by "VEL" (speed measurement) and "FLOW" (volume
flow measurement) on the display. Depending on the entered
area and the measured wind flow, the measured value can also
be significantly higher than it is possible to display. In this case,
"x100" or "x10" is displayed next to the measured value. The
measured value in the display must then be multiplied by 100 or
10 accordingly.
7.1 Setting the unit of the volume flow measurement
To select the unit FT³ or m³, press and release the "UNIT" key
once.
Hint:
The function also has an effect on the area specification.