PCT Tag Talk User manual

Power Contents Technology co., Ltd.
Tag Talk
INSTRUCTION
KC ID: R-C-PCT-A20TAGTALK01
FCC ID: 2A3ANA20TAGTALK01

Power Contents Technology co., Ltd.
1. Overview
1) Components
• Tag Talk device • C-Type cable
• Wrist strap/necklace • Product manual
• Tag 20 EA
2) Partial Names
FRONT REAR

Power Contents Technology co., Ltd.
2. Features
1) Power Management
- Power management is possible by operating the product's
power switch.
- The Tag Talk power consists of three stages: Power Off /
Local Mode / Bluetooth Mode.
- The device shuts down when the switch is moved to power off.
- Local mode and Bluetooth mode are the operating states of the
device, and changing the mode does not power off the device.
[
Picture 2.1
]
Power Mana
g
ement
2) Sound Management
- After turning on the device, you can adjust the device's sound output
size and TTS speed using the + and - keys on the volume buttons.
- The volume is adjusted when the button is entered for a short
time, and the guide voice will be output for the current volume.
- The TTS speed is adjusted when the button is entered for a long
time, and the guide voice will be output for the current TTS speed.
[
Picture 2.2
]
Sound Mana
g
ement

Power Contents Technology co., Ltd.
3) Charging Management
- If you use the product for the first time after purchasing it,
please charge the battery sufficiently.
- To safely charge the product, check the power cord to ensure
that there is no damage.
4) NFC Tagging
- When the device is operating normally, you can press the tag
button to read data from the NFC.
- After entering the nfc button, read the data from the tag when
the nfc tag is in the nfc module part of the back of the
product.
- Local mode: When NFC TAG data is read successfully, the data
is outputted to voice via TTS.
[
Picture 2.3
]
Ta
gg
in
g
button

Power Contents Technology co., Ltd.
3. How to use
① Turn on the device by moving the Power Switch on the
side of the product to Local Mode.
[
Picture 3.1
]
Local Mode
② When the power is turned on normally, a guided voice is
output from the speaker. NFC Read functionality is
available after the guided voice is output.
③ Move the device close to the NFC tag you want to read.
④ Press the NFC Read button, move the device so that the
NFC Tag to be read is within the device's NFC Module
recognition range.
[
Picture 3.2
]
NFC Read
⑤ If NFC Tag is read successfully, the entered information is
outputted voice.
If it fails, a context-sensitive voice is output.

Power Contents Technology co., Ltd.
4. Cautions in use
- Keep the machine away from hot air balloons (heaters, microwave
ovens, etc.), heaters, and high-pressure containers.
- Do not disassemble or give a strong impact to the instrument.
- Do not pierce the device with a sharps.
- Be careful when using it in a wet place, such as a sink or bathroom
and do not expose to water.
- Be careful as children can eat TAG that is not attached. And keep
TAG out of the reach of children.
- Do not touch the device or charging terminal with wet hands.
There is a risk of electric shock.
- Stop using it if abnormalities such as fever, deformation, or burning
smell occur.
5. FCC Information
- This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
1) Caution
- Any changes or modifications (including the antenna) made
to this device that are not expressly approved by the
manufacturer may void the user’s authority to operate the
equipment.

Power Contents Technology co., Ltd.
2) Radio Frequency Interference Statement for
Class B Digital Devices
- This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
- This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician
for help.
- This portable transmitter with its antenna complies with FCC
RF exposure limits for general population / uncontrolled
exposure.

Power Contents Technology co., Ltd.
6. Specifications
Product Name Tag Talk
Model name A20TAGTALK01
Dimension 약 5.6(W) × 2.0(H) × 11.5(D) cm
Audio 4Ω, 3W Speaker
Adapter
SMPS / DC Power Adapter
Output : 5V, DC, 2.4A
Input : 100-240V, AC, 50~60Hz
Wireless
Bluetooth Low Energy(BLE) Only
Wi-Fi 2.4GHz b/g/n
RFID 13.56 MHz
Battery Lithium-Ion Battery 1000mAh
Usage Temperature -10°C ~ 50°C
Usage Humidity 5% R.H. ~ 55% R.H.
7. Manufacturer Information
Name Power Contents Technology co., Ltd.
Tel. [phone]
Location
316, Pangyo Second Techno Valley Business Growth Center,
42, Changeop-ro, Sujeong-gu, Seongnam-si,
Gyeonggi-do, Republic of Korea
Copyright ⓒ 2020 Power Contents Technology co., Ltd.