peaklife 360 IRX10 User manual
INFRARED
CONTACTLESS
THERMOMETER
1. Safety use
● Please read this manual carefully before use.
● Please do not use this product in an environment higher
than 43° C or lower than 32°C.
● Please avoid the risk of electric shock by not using the
product around live currents.
● Please do not use the product in an environment with relative
humidity greater than 85%.
● Please use the product away from electromagnetic fields
generated by radios, mobile phones, etc.
● Please do not expose the product to the sun, or near the stove,
or contact with water.
● Please do not drop the product, and do not use if it is
damaged.
● Sweat on the forehead, hair, hat or scarf will affect
the accuracy of the measurement.
● Please confirm that the measurement distance is within 2
inches.
● If the forehead temperature can not reflect the human
body temperature due to sweating or other reasons,
please measure it behind the earlobe.
● When cleaning is needed, please use alcohol to gently
wipe the surface of the instrument.
● This product cannot replace the diagnosis of doctors.
● if there is any problem with the product, contact the
distributor and do not repair the product by yourself.
2
2. Instructions for Use
1) Short press to switch between Celsius and Farenheit.
2) Short press to set the beep prompts on or of.
3) Press the key to turn on the LED to read in the
dark.
4) Short Press the “ " key for Body temp test state
convert to object test.
5) This device will automatically shut down.
6) This device will beep once for a normal temperature
(93.2-99.2°F), twice for a high temperature (>99.3°F), and three
times for a low temperature (<90°F).
7) Insert the battery by removing the battery cover at the bottom of
the handle in the direction of the arrow. Pay attention to the correct
direction of the positive and negative poles and wait 10 minutes to
warm up upon the first use of a new battery. To extend the life of
the product, it is recommended to remove the batteries between
uses.
3
3. Self-checking on startup
Aiming at the target to be tested, press the measurement switch,
the LCD will display all the numbers and characters of the self
check, and the self check screen will appear, as shown in Fig. 1
below, and the screen will display about 1 second.
After the self-test, the notification sound will sound,indicating
that the power on self-test has been completed, and the
temperature value of the measured target will be displayed on
the LCD.
4. LCD display overview
① Temperature ° C/ ° f
② Digital reading
③ Switch model
4
5. Technical indicators
1. Basic parameters
Show exact digits
0.1°C (0.1°F)
Storage temperature
-10-55 ° C
Ambient temperature for
operation
10° C~ 40° C, optimal
temperature 25°
Relative humidity
<85%
Power Supply
DC-3V (2pcs type AAA battery )
Specifications
141*41*16.2mm
Weight
Approx 65g
Date of manufacture
See product certificate for
details
2. Measuring range
Temperature measurement
range in human body
32.0-42.99C
Measuring distance range
3-5cm (the best measurement
is 5cm)
Automatic shutdown
About 30s
3. Measurement accuracy
32~35.9°C (93.2~96.6°F)
±0.3°C(0.5°F)
36~39°C (96.8~102.2°F )
±0.2°C(0.4°F)
39~43°C (102.2~109.4°F)4
±0.3°C(0.5°F)
4. Service life
The service life of the product is approximately 100,000 uses.
5
6. Reference value of body temperature
People's body temperature changes with different times of the
day, but also affected by other external conditions, such as age,
gender, skin color, thickness, etc. Please refer to the table below
for the normal temperature range of different division ages:
Age
Normal temperature (°
C)
Normal Fahrenheit
(F)
0~2 years old
36.4~38.0
97.5~100.4
3~10 years old
36.1~37.8
97.0~100.0
11~65 years old
35.9~37.6
96.6~99.7
>65 years old
35.8~37.5
96.4~99.5
Be careful:
The body temperature of women is different from that of men.
Generally, it is about 0.3°C higher than that of men. During
ovulation, the body temperature will be 0.3-0.5° C higher than
usual.
6
7. Maintenance
1)The probe part is the most precise part of the product and
must be carefully protected.
2) Do not use corrosive detergent to clean this product
3) Do not immerse this product in water or other liquids.
4)Place the product in a dry place to avoid dust, pollution and
direct sunlight.
5)Please clean the medical infrared thermometer regularly,
usually once a month. If necessary, you can clean it properly
according to the actual dirt of the product: please use a dry
soft cloth to clean the medical infrared thermometer.If the
instrument is particularly dirty, the body can be wiped after
fully wringing with a cloth moistened with water or neutral
detergent, and then dried with a dry cloth.
8. Troubleshooting
When the message "Lo" or "Hi" appears, there are several
situations for reference:
Reason for displaying message
"Lo" or "Hi"
proposal
The temperature value is
affected by hair and sweat
Ensure that there is no obstruction
during temperature measurement
Temperature affected by air flow
change
Ensure that the air is stable during
temperature measurement
Too far to measure
Please note that the measurement
distance should not be more than 5cm
Walk into the room from outdoor
low temperature or high
temperature
Please wait 20 minutes for the
temperature of the subject to adapt to
the measurement environment before
measuring
7
9. Waste disposal instructions
If the electronic products and battery are directly discarded in
the garbage, it will cause harm to the environment. Please follow
the local laws and regulations.
10. Symbol description
Symbolic
graphics
Meaning
Symbolic
graphics
Meaning
Note, Ref
Accompanying
documents
Refer to instructions for
use
Low voltage
prompt
Type B application part
Do not discard
at will
A California-based company
https://peaklife360.com/downloads
8
Table of contents
