3
* If not using the instruments for a long time or during a lighting storm, please
lpull out plug from the socket
* Do not connect the instrument to the socket by multiple connector, or it will
lower the sound quality, or it will make socket overheat
Assemble Use
* Please carefully read the attachment that explains the assemble process. If assem-
bling the instrument in a wrong order, it will damage the instrument and hurt the user.
* Please connect the external equipment while the digital piano is o.
* Before using, please install the supporting screw and adjust it close to the ground, in
case of trampling pedal.
Installation place
* In case of deformation of control panel and damage to inner components, please do not
place this device in an environment with a lot of dirt, vibration, extreme cold and hot (such
as, direct sunshine, closing to heater and inside a car under the burning sun).
* Please do not use this device near the television, radio, stereo, cell phone or other
electronic devices. This may make noise on the device itself and television or radio
nearby.
* Please do not put this device on unstable place, or it may cause a sudden fall down.
* Before moving the device, please pull out all electric cables from the socket.
* When you set this device, please conrm the AC socket going to be used is reachable.
The device should be connected to the socket with protecting grounding connection. If
