Penn Elcom PDU01-14 User manual

PDU01-14
20A SURGE & EMI FILTERED AC/DC PDU
1U Rack Mounting PDU with Su ge P otection & EMI Filte
1U high Horizontal Mounting Unit is designed to provide a versatile hook-up for the distribution
of AC & DC power within multimedia ra king appli ations.
Designed & Made in the UK by Penn Elcom Ltd
9-10 Parsons Road, Parsons Industrial Estate, Washington Tyne & Wear, NE37 1HB, UK
0191 416 1717 or www.penn-el om. om
Input Powe Con EMI filtered input with prote tion against Lightning Strike & Lo al Power Surge.
20A T inline internal fuse.
Output AC~ 8 x IEC320 C13 in 2 banks of 4 with a Maximum Combined Load 20A
P otection 2 x 10 AMP Cir uit Breaker Swit hes
DC PSU Swit hable Isolated Universal DC supply fully prote ted
(AC input range 88V~264V)
Output DC- 12 Way Pluggable S rew Terminal So ket
3 x 5V d
3 x 12V d
With a Max Combined Load of 65W
Ea th Link Thumb S rew Terminal for Ra k Grounding
Usage
Nominal Voltage: 230V
Usable Voltages 200V~ 240V full range
Frequen y: 50/60HZ full range
Max. A/C Output: Current 20A
Case Size: 45 x 140 x 430mm (O.A.483mm)
Weight: 2Kg
Compliance All omponents used in this onform to urrent RoHS, CE & UL ertifi ation
(EMI:EN55022 (CISPR22) Class B; EN61000-3-2,3 EMS:EN61000-4-2,3,4,5,6,8,11; Light industry level, riteria A)

PDU01-14 USERS GUIDE
Designed & Made in the UK by Penn Elcom Ltd
9-10 Parsons Road, Parsons Industrial Estate, Washington Tyne & Wear, NE37 1H , UK
0191 416 1717 or www.penn-elcom.com
RED
Neon
Indicator
s
on the trip switches will show
there is AC power in the unit.
Should these be OFF then -
1st check the power is connected
2nd check the internal line fuse
PLEASE NOTE
:
In the event of a Power Surge or
Lightning Stri e the ultrafast
protection circuit will be activated.
This will result in a blown fuse
To replace this fuse disconnect the
supply remove the lid and fit a new
20A T 20mm fuse into the holder
10
A Trip
Switches for
banks 1 & 2
In the event of
overload these will
cut power to the
output sockets
DC Power
S pply Switch
Activates the 5 &
12V DC outputs
AC Power Inp t
A Neutrik powerCON Connector is supplied
for A/C power input.
PLEASE NOTE
FITTING A 13A PLUG WILL REDUCE THE
OVERALL POWER RATING E&OE
Earth Strap
Point
For attachment
to the rack unit
AC~O tp ts
2 anks of 4
C13 sockets
Each with max
load of 10A
for use with C14
Connectors
Yo r Kit Incl des
6 Green 2 Way Terminal Plugs
1 lue Neutrik powerCON Plug
FOR
20A
USE THIS
UNIT MUST E USED
WITH 2.5mm DIA
20A CA LE AND
CONNECTED TO
A SUITA LE
OUTPUT SUPPLY
DC O tp ts
65W
Max
3 x 5V and 3 x 12V
Plug-in screw terminals
are used as shown here
+V 0V
When connecting outputs
are consecutively numbered
1-2, 3-4, 5-6 = 5V
7-8, 9-10, 11-12 =12V
This is an isolated s pply
0V is not Gro nd

19 INCH RACK MOUNT POWER DISTRIBUTION UNIT
OPERATION & USER GUIDE
Please read the following information before installing or
using your Power Distribution Units
Safety and Gro nding (earth)
•This PDU is intended for indoor use only.
•Do not install this PDU where excessive moisture or heat is present.
•Never install any wiring, equipment, or PDU's during a lightning storm.
•lways connect this PDU into a three-wire, grounded power outlet.
•The power input cable should be connected to appropriate branch circuit/mains protection
(fuse or circuit breaker). Connection to any other type of power outlet may result in a shock hazard.
•Use only the supplied brackets for mounting.
•Never work alone under hazardous conditions.
•Check that the power cord, plug, and socket are in good condition.
•Disconnect the PDU from the power outlet before you install or connect equipment to reduce the
risk of electric shock if you cannot verify grounding. Reconnect the PDU to the power outlet only
after you have made all connections.
•Use a protective earth connector with equipment. This type of connector carries the leakage
current from the load devices (computer equipment). Do not exceed a total leakage current of
3.5m or a risk of electrical shock will result.
•Use the Stud Earth point on the back of the PDU to directly ground to the rack.
•LW YS make sure the equipment that has been connected to the PDU is OFF, before switching on
the PDU, as the Inr sh C rrent can blow the power fuse and activate the protection circuit.
•ll equipment plugged into this unit should have the correct fuses fitted for their current draw.
•Penn Elcom Ltd excepts no responsibility or liability for any equipment connected to this unit
GUARANTEE
YOUR EQUIPMENT IS GUARANTEED FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE OF THE PRODUCT AGAINST ANY DEFECTS DUE TO FAULTY
MATERIALS OR FAULTY MANUFACTURING. DURING THIS PERIOD, REPLACEMENT OR REPAIR TO THE UNIT WILL BE MADE WITHOUT CHARGE BY ANY
AUTHORISED DEALER OR THE FACTORY SUBJECT TO THE FOLLOWING CONDITIONS.
The faul mus be en irely due o faul y ma erials or faul y manufac ure.
The defec mus NOT have been caused by poor ins alla ion, acciden al damage, misuse or failure o comply wi h he ins ruc ions given in he users guide.
If a any ime during he guaran ee period a par or par s of he equipmen are repaired wi h a par or par s
no supplied or approved by us; or if he equipmen has been disman led or repaired by any person no au horised by he us, hen he guaran ee shall
immedia ely cease and become void.
Evidence of he da e of purchase mus be produced a he service poin o ob ain he benefi of his guaran ee. Any carriage charges rela ing o he guaran ee
will be he responsibili y of he purchaser.
This guaran ee applies o he original purchaser only and he equipmen mus have been purchased or financed from new, his guaran ee canno be assigned or
ransferred.
The company reserves he righ o replace he equipmen or repair i a heir discre ion, any defec ive par shall become he proper y of he company.
This guaran ee applies o equipmen purchased and used wi hin he E.E.C. The impor ers of equipmen in non E.E.C. coun ries are responsible for he guaran ee
of his uni . Par s required under guaran ee are free. Shipping charges for componen s will be charged a cos .
The guaran ee shall become void if he equipmen is a any ime used on any supply circui or vol age range o her han ha specified on he equipmen .
12. THIS GUARANTEE DOES NOT IN ANY WAY AFFECT YOUR STATUTORY RIGHTS AS A CONSUMER.
9-10 Parsons Road, Parsons Industrial Estate, Washington Tyne & Wear, NE37 1HB, UK
0191 416 1717 or www.penn-elcom.com