Pepperl+Fuchs OHV210-F229-B15 User manual

OHV210-F229-B15
Handheld reader
Manual

With regard to the supply of products, the current issue of the following document is applicable:
The General Terms of Delivery for Products and Services of the Electrical ndustry, published
by the Central Association of the Electrical ndustry (Zentralverband Elektrotechnik und Elek-
troindustrie (ZVE ) e.V.) in its most recent version as well as the supplementary clause:
"Expanded reservation of proprietorship"
Worldwide
Pepperl+Fuchs Group
Lilienthalstr. 200
68307 Mannheim
Germany
Phone: [phone] - 0
E-mail: [email protected]
North American Headquarter
Pepperl+Fuchs nc.
1600 Enterprise Parkway
Twinsburg, Ohio 44087
USA
Phone: [phone]
E-mail: [email protected]
A ia Headquarter
Pepperl+Fuchs Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Phone: [phone]
E-mail: [email protected]rl-fuchs.com
https://www.pepperl-fuchs.com

OHV210-F229-B15
Contents
2022-10
3
1 Introduction................................................................................................................ 5
1.1 Content of thi Document............................................................................. 5
1.2 Target Group, Per onnel ............................................................................... 5
1.3 Symbol U ed ................................................................................................ 5
2 Product De cription .................................................................................................. 7
2.1 U e and Application ...................................................................................... 7
2.2 Indicator and Operating Element ............................................................. 8
2.3 Scope of Delivery......................................................................................... 10
2.4 Acce orie .................................................................................................. 10
2.5 Storage and Di po al.................................................................................. 10
3 In tallation................................................................................................................ 11
3.1 In erting and Removing the Battery.......................................................... 11
3.2 Charging Cradle Connection ...................................................................... 12
3.3 Charging the Handheld Reader.................................................................. 14
3.4 Connection via Bluetooth®......................................................................... 15
3.5 Connection to a Ho t................................................................................... 16
3.6 Locking Device Connection ...................................................................... 17
4 Configuration ........................................................................................................... 18
4.1 Selecting the Operating Mode.................................................................... 18
4.1.1 Keyboard Mode ................................................................................................................ 18
4.1.2 Vision Configurator Mode ................................................................................................. 18
4.1.3 Bidirectional Communication ............................................................................................ 19
4.1.4 Keyboard Layout............................................................................................................... 21
4.2 U ing Vi ion Configurator........................................................................... 21
4.2.1 Connecting to Vision Configurator .................................................................................... 21
4.2.2 Layout of Application Window........................................................................................... 23
4.2.3 Sensor Data...................................................................................................................... 24
4.2.4 Test Statistics.................................................................................................................... 24
4.2.5 Firmware Update .............................................................................................................. 25
4.2.6 Read Result...................................................................................................................... 26
4.2.7 Edited Parameters ............................................................................................................ 27
4.2.8 Script ................................................................................................................................ 28
4.3 Configuration U ing Control Code ........................................................... 32
4.3.1 Data Matrix control codes ................................................................................................. 32
5 Operation.................................................................................................................. 55
5.1 Switching On the Handheld Reader........................................................... 55

OHV210-F229-B15
Contents
2022-10
4
5.2 Reading Code .............................................................................................55
5.3 Orientation....................................................................................................56
5.4 Operation of the Charging Cradle ..............................................................57
5.5 U ing the Battery .........................................................................................59
5.6 Locating the Handheld Reader...................................................................60
5.7 Operating Mode ..........................................................................................60
5.8 Notification .................................................................................................61
6 Servicing...................................................................................................................63
7 Trouble hooting .......................................................................................................64

OHV210-F229-B15
ntroduction
2022-10
5
1 Introduction
1.1 Content of thi Document
This document contains information required to use the product in the relevant phases of the
product life cycle. This may include information on the following:
•Product identification
•Delivery, transport, and storage
•Mounting and installation
•Commissioning and operation
•Maintenance and repair
•Troubleshooting
•Dismounting
•Disposal
The documentation comprises the following parts:
•This document
•Datasheet
n addition, the documentation may comprise the following parts, if applicable:
•EU-type examination certificate
•EU declaration of conformity
•Attestation of conformity
•Certificates
•Control drawings
•nstruction manual
•Functional safety manual
•Other documents
1.2 Target Group, Per onnel
Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount-
ing lies with the plant operator.
Only appropriately trained and qualified personnel may carry out mounting, installation, com-
missioning, operation, maintenance, and dismounting of the product. The personnel must have
read and understood the instruction manual and the further documentation.
Prior to using the product make yourself familiar with it. Read the document carefully.
1.3 Symbol U ed
This document contains symbols for the identification of warning messages and of informative
messages.
Note
For full information on the product, refer to the further documentation on the nternet at
www.pepperl-fuchs.com.
Note
For specific device information such as the year of construction, scan the QR code
on the device. As an alternative, enter the serial number in the serial number search
at www.pepperl-fuchs.com.

2022-10
6
OHV210-F229-B15
ntroduction
Warning Me age
You will find warning messages, whenever dangers may arise from your actions. t is mandatory
that you observe these warning messages for your personal safety and in order to avoid prop-
erty damage.
Depending on the risk level, the warning messages are displayed in descending order as fol-
lows:
Informative Symbol
Action
1. This symbol indicates a paragraph with instructions. You are prompted to perform an action or
a sequence of actions.
Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt the device and any connected systems and plants, or result in
their complete failure.
Note
This symbol brings important information to your attention.

OHV210-F229-B15
Product Description
2022-10
7
2 Product De cription
2.1 U e and Application
The handheld is a compact handheld reader for all common 1-D and 2-D codes. Special tech-
nology to prevent glare allows the device to read codes accurately on highly reflective surfaces.
With its patented dual lens and a resolution of 1.2 million pixels, it can read both small and large
codes from a wide range of distances. A different-colored target projection makes it easier to
see the relevant code. The device responds via a vibration or a visual or audio signal.
The Vision Configurator software can be used to create rule sets for formatting read results
without extensive programming work. This enables easy integration into ERP systems. The
read data is transferred via the Bluetooth interface or by plugging the handheld reader into the
charging cradle. With its rugged housing and degree of protection ( P65), the handheld reader
is suitable for outdoor use.
Figure 2.1 Handheld reader
The device is only approved for appropriate and intended use. gnoring these instructions will
void any warranty and absolve the manufacturer from any liability.
Use the device only within the specified ambient and operating conditions.
Protection of the personnel and the plant is not ensured if the device is not used according to its
intended use.
Caution!
rritation caused by optical radiation
The optical unit on the handheld reader is equipped with very bright LEDs that can cause irrita-
tion in dark environments.
Do not point the handheld reader at people.
Do not look directly into the optical unit on the handheld reader.

2022-10
8
OHV210-F229-B15
Product Description
2.2 Indicator and Operating Element
Handheld reader
1Optical unit
2Data LED
3Wireless LED
4Trigger button 1
5Trigger button 2
6Battery release
7Battery status button
8Battery status indicator
9Trigger button 3
1
2
3
4
5
9
6
78

OHV210-F229-B15
Product Description
2022-10
9
Charging cradle
Table mount
The table mount provides additional stability to the charging cradle when it is freestanding on a
counter or table.
1Quick connection code
2Wireless LED
3Page button
4Micro USB interface
5Threaded mounting inserts (M3 x 0.5)
6Cable guide groove
1Cable output
2Rubber feet
3Cable entry guides
4Cable output
2
4
5
6
1
3
1
2
3
4

2022-10
10
OHV210-F229-B15
Product Description
Lithium-ion battery
2.3 Scope of Delivery
Check the packaging and contents for damage.
Check if you have received every item and if the items received are the ones you ordered.
•Handheld reader
OHV210-F229-B15
•Lithium ion battery, 1200 mAh
OHV210-BAT
•Charging cradle
OHV210-CHARGER-B15
2.4 Acce orie
2.5 Storage and Di po al
Keep the original packaging. Always store and transport the device in the original packaging.
Store the device in a clean and dry environment. The permitted ambient conditions must be
considered, see datasheet.
The device, built-in components, packaging, and any batteries contained within must be dis-
posed in compliance with the applicable laws and guidelines of the respective country.
1Battery status button
2Battery Status ndicator
1
2
De ignation De cription
OHV210-CHARGER-B15 Charging cradle for OHV200 handheld readers with integrated
Bluetooth modem
incl. connection cable USB-G-1M-PVC-ABG-USBB-G
The connection cable can also be ordered separately at a later
point.
OHV-BAT Lithium ion battery, 1200 mAh
Vision Configurator Configuration software for camera-based sensors
When using OHV handheld readers, you can download the soft-
ware free of charge from www.pepperl-fuchs.com.

OHV210-F229-B15
nstallation
2022-10
11
3 In tallation
3.1 In erting and Removing the Battery
In erting the Battery
The battery is shaped so that it can only be inserted in one direction.
1. nsert the battery into the cavity of the handheld reader until it clicks into place.
2. Press any key on the handheld reader (except the battery status key on the battery) for half a
second.
The handheld reader begins the start sequence. When the handheld reader has success-
fully completed its start sequence (approximately 2 seconds), it emits a beep, the LEDs
flash, and the handheld reader vibrates once.
Removing the Battery
1. Move the locking device on the bottom of the handheld reader in the direction of the arrow until
the battery easily springs out.
1
2

2022-10
12
OHV210-F229-B15
nstallation
2. Pull the battery out of the handheld reader.
3.2 Charging Cradle Connection
Connecting the Charging Cradle
1. nsert the micro USB plug of the cable into the micro USB connection on the bottom of the
charging cradle.
2. Route the cable along the cable guide groove on the bottom of the charging cradle.
3. nsert the USB plug on the connection cable into a free USB port on the PC. This step can be
carried out even during operation.
4. Place the charging cradle in the table mount. The charging cradle can be attached to the table
mount using the two flat head screws supplied.
Note
When the charging cradle is placed in a table mount, the cable should come
through the hole on the back of the charging cradle.

OHV210-F229-B15
nstallation
2022-10
13

2022-10
14
OHV210-F229-B15
nstallation
3.3 Charging the Handheld Reader
Charging the Handheld Reader
1. To charge the battery installed in the handheld reader, place the handheld reader in the
charging cradle, with the scanning window facing down.
The handheld reader emits a beep when it is turned off and activated. The handheld reader
emits an additional beep when it is coupled with the charging cradle and reconnects.
The battery status indicator starts flashing alternately for four secondsand lights up for one
second. When the battery is fully charged , the battery status indicator lights up continu-
ously.
Note
Charging Duration
The battery will be fully charged in approximately 3.5 hours when the charging
cradle is used with an external power supply. Charging time may vary when the
inductive charging cradle is connected to a PC USB connection.
Tip
Before Fir t U e
t is recommendedthat the battery is fully charged before using the handheld reader for the first
time, even if a new battery has remaining capacitance.
To ensure sufficient battery power for the duration of a shift, always place the handheld reader
back in the charging cradle between activities.

OHV210-F229-B15
nstallation
2022-10
15
3.4 Connection via Bluetooth®
The charging cradle connects to a host via a USB cable. t automatically detects the USB hosts
and connects as an H D keyboard device by default. To change to a different interface type,
scan the desired interface configuration code.
The handheld reader can be coupled with the inductive Bluetooth® charging cradle. The
charging cradle receives data wirelessly from the coupled handheld reader and sends it via
USB to the host computer. t can receive commands, configurations, files, etc., from the host
computer, and send them wirelessly to the coupled handheld reader.
E tabli hing a Bluetooth® Connection
1. To couple the handheld reader with the Bluetooth® charging cradle, scan the quick connect
code on the front of the cradle.
A successful coupling is indicated by the handheld reader emitting two short beeps followed
by another beep and then vibrating. n addition, the radio indicators on both the handheld
reader and the charging cradle permanently light up green. The read data is transferred
directly to the connected PC and to the currently opened program. The handheld reader
behaves like a keyboard.
Bluetooth Wirele Performance
The handheld reader uses Class 2 Bluetooth wireless. The output power in the handheld
reader is set to 0 dBm by default , but can be configured to lower or higher maximum values.
The default output power of the Bluetooth wireless on the handheld reader is -8 dBm and can
also be adjusted. A reduction in wireless output limits the detection range of the data transfer.
Automatic Bluetooth Reconnection
The handheld reader attempts to reconnect automatically if the connection is lost (e.g., if the
handheld reader is outside the detection range, if battery power is reduced, if the device is
restarted, or if the charging cradle or host is turned off). This automatic reconnection function is
enabled by default and can be deactivated as needed. The automatic reconnection timeout is
five minutes by default but can be configured for other periods.
Bluetooth Security
Bluetooth low-energy communication in the handheld reader is AES-128 encrypted as stan-
dard. Please contact Pepperl+Fuchs Support for additional security requirements.
Tip
Battery Statu Indicator
To check the battery charge status, press the battery status button on the back of the battery,
see chapter 5.5.

2022-10
16
OHV210-F229-B15
nstallation
3.5 Connection to a Ho t
The handheld reader can be coupled as a Bluetooth H D keyboard device with a third-party
host such as a cell phone, tablet, and PC that supports BLE (Bluetooth Low Energy).
E tabli hing a Ho t Connection
1. Scan the following control codes CC0066002_01 and finally M20381_01 to put the handheld
reader into Bluetooth H D keyboard mode.
Figure 3.1 CC0066002_01
Figure 3.2 M20381_01
2. Open the Bluetooth settings menu on the mobile device or device manager on the PC, find
"OHV210" under the available Bluetooth devices, and connect.
When the handheld reader is successfully connected, it emits a beep and the BT indicator
on the handheld reader flashes.

OHV210-F229-B15
nstallation
2022-10
17
3.6 Locking Device Connection
The handheld reader can lock the connection between a read device and charging cradle.
After the connection has been locked, the charging cradle can only connect to the coupled
read device.
Locking Device Connection
1. After you have coupled the handheld reader with the charging cradle,
scan the M20409_01 barcode to lock the connection
and scan the M20410_01 barcode to unlock the connection.
Figure 3.3 M20409_01 and M20410_01

2022-10
18
OHV210-F229-B15
Configuration
4 Configuration
There are two different ways to configure the handheld reader.
•Control Code : Control codes allow direct configuration without using a PC. To change a
parameter, scan the appropriate control code using the handheld reader. See chapter 4.3.
•Vi ion Configurator: The software allows you to perform advanced configuration on a
PC using a clearly arranged user interface. Standard functions include modifying the out-
put string, editing the read result, and assigning a prefix or suffix to the read result, gener-
ating user-defined control codes, and performing a firmware update. See chapter 4.2.
4.1 Selecting the Operating Mode
The handheld reader has three different operating modes.
4.1.1 Keyboard Mode
The handheld reader can be used automatically in keyboard mode. No additional control code
is required. To couple with the charging cradle , all that is required is for the quick connect
code on the front of the charging cradle to be read (see chapter 3.4).
4.1.2 Vi ion Configurator Mode
Vision Configurator is a configuration software for camera-based sensors. The software allows
you to perform advanced configuration of the sensor using a clearly arranged user interface.
Standard tasks include parameterizing the handheld reader, saving data sets, and transferring
and displaying data and error diagnostics.
To install Vision Configurator, you must activate Vision Configurator mode see chapter 4.2.1.
Mode De cription
Keyboard Mode n keyboard mode, the handheld reader acts like a keyboard; see
chapter 4.1.1. The read codes are transferred to the PC as a combina-
tion of letters and digits.
Vi ion Configurator
Mode
n Vision Configurator mode, the charging cradle is connected to a PC
and connects to the Vision Configurator. This mode is used exclusively
for communication with Vision Configurator, see chapter 4.1.2.
Virtual COM Port The handheld reader operates as an RS-232 serial device via an emu-
lator, see chapter 4.1.3.
Note
Data is transferred using a US English keyboard layout by default.
f data is not transferred correctly in keyboard mode, modify the keyboard layout.
Note
As an alternative to configuration using Vision Configurator, you can configure the handheld
reader using control codes (see chapter 4.3.1).
Note
Switch to Keyboard Mode
To switch back to keyboard mode, first close Vision Configurator. Then scan the quick connect
code on the front of the charging cradle.

OHV210-F229-B15
Configuration
2022-10
19
4.1.3 Bidirectional Communication
To enable bidirectional communication, virtual COM mode must be activated. To do so, pro-
ceed as follows:
Activating Virtual COM Mode
1. Scan the following control code "USB Vcom" to activate the virtual USB COM port.
2. Scan the following control code "M20326_01" to activate the text commands.
3. Alternatively, the text command can be activated via the command ++++FWCMSOR1<CR> and
sent to the handheld reader via a monitor program.

2022-10
20
OHV210-F229-B15
Configuration
n virtual COM mode, the handheld reader operates like an RS-232 series device.
Di abling Virtual COM Mode and Switching to USB Keyboard Mode
1. Scan the following control code "USB Keyboard" to enter Keyboard mode.
2. Scan the following control code "M20325_01" to deactivate the text commands.
3. f you have activated the text command via a monitor program, you can deactivate it using the
command ++++FWCMSOR0<CR>.
Example
Sending Text Command
The Hercules program from HW group is one example of a monitor program
that can be used. n virtual COM mode, you can send the commands for beep
and trigger to the handheld reader, for example.
The following figure shows the two commands "Beep" and "Trigger:"
Figure 4.1 Example of beep and trigger commands
•Beep: RDCMXEV4P14<CR>
•Trigger: RDCMXEV1,P11.P20,P3500<CR>