Pepperl+Fuchs PROFINET VBG-EP1-KE5-D Series Reference guide

PROFINET: Changeover
from ASi gateways type K2
to KE5
Brief Instructions

With regard to the supply of products, the current issue of the following document is applicable:
The General Terms of Delivery for Products and Services of the Electrical ndustry, published
by the Central Association of the Electrical ndustry (Zentralverband Elektrotechnik und Elek-
troindustrie (ZVE ) e.V.) in its most recent version as well as the supplementary clause:
"Expanded reservation of proprietorship"
Worldwide
Pepperl+Fuchs Group
Lilienthalstr. 200
68307 Mannheim
Germany
Phone: [phone] - 0
E-mail: [email protected]perl-fuchs.com
North American Headquarters
Pepperl+Fuchs nc.
1600 Enterprise Parkway
Twinsburg, Ohio 44087
USA
Phone: [phone]
E-mail: [e-mail]
Asia Headquarters
Pepperl+Fuchs Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Phone: [phone]
E-mail: [e-mail]
https://www.pepperl-fuchs.com

PROF NET: Changeover from ASi gateways type K20 to KE5
Contents
2022-11
3
1 Introduction................................................................................................................ 4
2 Switch connections ................................................................................................... 5
3 Transfer Configuration ............................................................................................1
4 PROFINET Integration............................................................................................. 11

2022-11
4
PROF NET: Changeover from ASi gateways type K20 to KE5
ntroduction
1 Introduction
Changeover from ASi gateways with PROFINET interface type K2 to the
new VBG-EP1-KE5-D*
With these instructions, you can easily switch from previously used K20 gateways to the new
KE5 gateways. The following advantages result from a change:
•Extensive web server for easy configuration and diagnostics
•Easy commissioning via your mobile device
•REST AP interface enabling the implementation of oT solutions
•Multiprotocol functionality supports PROF NET and EtherNet/ P
•Quick setup via push button

PROF NET: Changeover from ASi gateways type K20 to KE5
Switch connections
2022-11
5
2 Switch connections
Ethernet
Change Ethernet
1. Remove the Ethernet connections from the K20 sockets PROF NET 1 and PROF NET 2
2. nsert the Ethernet connectors into the sockets X1 and X2 at the VBG-EP1-KE5-D*.
Figure 2.1
2
3
2
1
2
4
2
2
1
3
1
1
1
4
1
2
0
3
0
1
0
4
0
2
X1
X2
X3
PN EIP
BF
SF
NS
MS
Hold to
config.
SD
Memory
AUX
ASi Power
Config
ASi Line 2
ASi Power
Config
ASi Line 1
PROFINET 1 →X1
PROFINET 2 →X2

2022-11
6
PROF NET: Changeover from ASi gateways type K20 to KE5
Switch connections
ASi Power Supply
Change power supply to VBG-EP1-KE5-D
1. Take the power supply connections out of the K20 sockets ASi PWR+/-.
2. Plug the connections of the power supply into the sockets 03 and 01 on the VBG-EP1-KE5-D.
Figure 2.2
Note
f you are using a K20 gateway with integrated data decoupling so far, you need a special ASi
power supply for the supply of the KE5 gateway.
2
3
2
1
2
4
2
2
1
3
1
1
1
4
1
2
0
3
0
1
0
4
0
2
X1
X2
X3
PN EIP
BF
SF
NS
MS
Hold to
config.
SD
Memory
AUX
ASi Power
Config
ASi Line 2
ASi Power
Config
ASi Line 1
ASi PWR+ →03
ASi PWR– →01

PROF NET: Changeover from ASi gateways type K20 to KE5
Switch connections
2022-11
7
Change power supply to VBG-EP1-KE5-DMD
1. Take the power supply connections out of the K20 sockets ASi1 PWR+/- and ASi2 PWR+/-.
2. Plug the connections of the power supply into the sockets 13 and 11 for ASi network 1 and 03
and 01 for ASi network 2.
Figure 2.3
2
3
2
1
2
4
2
2
1
3
1
1
1
4
1
2
0
3
0
1
0
4
0
2
X1
X2
X3
PN EIP
BF
SF
NS
MS
Hold to
config.
SD
Memory
AUX
ASi Power
Config
ASi Line 2
ASi Power
Config
ASi Line 1
ASi2 PWR+ →13
ASi2 PWR– →11
ASi1 PWR+ →03
ASi1 PWR– →01

2022-11
8
PROF NET: Changeover from ASi gateways type K20 to KE5
Switch connections
ASi Network
Change ASi network to VBG-EP1-KE5-D
1. Take the connectors of the ASi network out of the K20 sockets ASi +/-.
2. Plug the connectors for the ASi network into the sockets 04 and 02.
Figure 2.4
2
3
2
1
2
4
2
2
1
3
1
1
1
4
1
2
0
3
0
1
0
4
0
2
X1
X2
X3
PN EIP
BF
SF
NS
MS
Hold to
config.
SD
Memory
AUX
ASi Power
Config
ASi Line 2
ASi Power
Config
ASi Line 1
ASi+ →04
ASi– →02

PROF NET: Changeover from ASi gateways type K20 to KE5
Switch connections
2022-11
9
Change ASi network to VBG-EP1-KE5-DMD
1. Take the connectors of the ASi network 1 and 2 out of the K20 sockets ASi1 +/- and ASi2 +/-.
2. Plug the connectors for ASi network 1 into the sockets 04 and 02 for ASi network 2 into the
sockets 14 and 12
Figure 2.5
2
3
2
1
2
4
2
2
1
3
1
1
1
4
1
2
0
3
0
1
0
4
0
2
X1
X2
X3
PN EIP
BF
SF
NS
MS
Hold to
config.
SD
Memory
AUX
ASi Power
Config
ASi Line 2
ASi Power
Config
ASi Line 1
ASi2+ →14
ASi2– →12
ASi1+ →04
ASi1– →02

2022-11
10
PROF NET: Changeover from ASi gateways type K20 to KE5
Transfer Configuration
3 Transfer Configuration
Store ASi configuration on KE5 gateway
1. Connect the VBG-EP1-KE5-D*, see chapter 2.
2. Press and hold the pushbutton for 5 seconds.
The ASi 1 LEDs flash yellow.
The configuration of the ASi network 1 can be saved.
3. Press and hold the pushbutton for 5 seconds.
The Memory LED flashes green
The configuration of ASi network 1 is stored.
4. Press the pushbutton briefly.
The ASi 2 LEDs flash yellow.
The configuration of the ASi network 2 can be saved.
5. Press and hold the pushbutton for 5 seconds.
The Memory LED flashes green
The configuration of ASi network 2 is stored.
Note
Switching between ASi network 1 and 2 at VBG-EP1-KE5-DMD
Note
The device reboots automatically after saving the configuration.

PROF NET: Changeover from ASi gateways type K20 to KE5
PROF NET ntegration
2022-11
11
4 PROFINET Integration
Save the configuration of the K2 gateway
Before you add the KE5 gateway to your PROF NET project, save the relevant configurations of
the K20 gateway, e.g. by taking a screenshot:
•Station name
•Data image
•Device parameters
1. Data image
2. Device parameters
Import GSD file
1. Download the matching GSD file for your device from our website.
VBG-EP1-KE5-D
VBG-EP1-KE5-DMD
2. nstall the GSD file in the T A Portal via "Options/Manage general station description files
(GSD)"
1
2

2022-11
12
PROF NET: Changeover from ASi gateways type K20 to KE5
PROF NET ntegration
Add VBG-EP1-KE5-D* to the PROFINET controller
1. Remove the K20 gateway from the network.
2. Add the new KE5 gateway to the PROF NET controller.
Figure 4.1
Assign PROFINET station name
1. Assign the station name of the K20 gateway to the VBG-EP1-KE5-D*.
Configuration of the data image and device parameters
1. Enable "Download device parameters" and adjust the ASi device parameters to match those of
the previously used K20 gateway.
Figure 4.2
2. Add the data image from the K20 gateway to the new VBG-EP1-KE5-D*.

PROF NET: Changeover from ASi gateways type K20 to KE5
PROF NET ntegration
2022-11
13
Figure 4.3
Go Online
1. Press "Go Online" in the T A Portal and you are done.
Now you can benefit from all the advantages of the new KE5 ASi gateway.
Note
f you want to use analog devices after adding the data image, you need to
adjust the device parameters of the respective address to the previously used
settings.

Pepperl+Fuchs Quality
Download our latest policy here:
www.pepperl-fuchs.com/quality
www.pepperl-fuchs.com
© Pepperl+Fuchs · Subject to modifications
/ DOCT-8495