Perfect-Office A8-W5 User manual

A8 -W53D PrinterInstallation Guide
Perfect-Office

A8-W5 AssemblyInstructions
Attention:
1.Please make sure the package not broken when you receive
it.
2.Pleasechecktheprinterpartsaccording tothepackinglist.
3.Please contract your supplier if any questions.
4.The installation of graphics and text for the model diagram,
for reference only, in kind to receive goods prevail.

A8-W5 assembly parts list 1

A8-W5 assembly parts list 2

A8-W5 assembly parts list
3

A8-W5 assembly parts list 4

A8-W5 assembly parts list5

A8-W5 assembly parts list 6
Please check printer parts quantity when you
receiveit.

Name of each printer part

Step1
Assembly Step 1
Pleasebeawarethescrewholesisin
red circles

Assembly Step2
Pleasebeawarethescrew
holesisinblack circles
Step 2

Assembly Step 3
Yaxis motor and wire 400mm
Motor fixing plate
Y axis position switch 700mm
Rear fixing plate
Step

Assembly Step 4
Step 2
Step 3

Assembly Step 5

Assembly Step 6
Threaded rod 400mm

Y Guide rod 380mm
Assembly Step 7

Attention：Leave vacancy between belt fixation
clampandhotbedfixedplateforbeltpositioning.
Assembly Step 8

Assembly Step 9
Before Assembly
After Assembly
Attention:Pleasediagonallytightenthescrewswhen allareinthereplace

Assembly Step 10
Attention:Belt is for X&Y axis transmitting.Cut the length you
need toeach transmission shaft.The belt is 1.5 mintotaland
10-20cm left after installation.

Assembly Step1 1 Wing nut swill keep the height of hot bed
levelas well as firming the hot bed.
Attention:Hotbed screws
should be in the bottom