PerfectCLEAN® Squeegee and PerfectCLEAN® Shower Paddle Set
Assembly Instructions
Parts List
Step 1- Connect the handle. The handle and clamp
are used with both the Squeegee and the Shower
Paddle.
1) Squeegee blade
2) Clamp and Orange thumb-screw
3) Paddle
4) Handle
Loosen Orange thumb-screw. Turn
counter clockwise 2-3 turns.
Loosen Orange thumb-screw. Turn
counter clockwise 2-3 turns. Until the
squeegee blade slides out (if attached).
Tighten the Orange thumb-screw.
Turn it clockwise until snug. Do not
over tighten.
Tighten the Orange thumb-screw.
Turn it clockwise until snug. Do
not over tighten.
Insert the Squeegee blade into the
clamp with rubber side facing oor
and metal side facing up.
a )
b )
b )
c )
e)
c )
d )
Step 2 - How to assemble the PerfectCLEAN® Squeegee.
How to assemble the PerfectCLEAN® Shower Paddle.
Remove the frontside protective covering on the Paddle.
a )
The Orange thumb-screw bottom
should be ush with the clamp bottom.
Angle paddle and insert hook under thumb-screw.
Slide Orange Mitt onto
the PC Shower Paddle.
See a video demonstration at:
www. Perfectclean.com/paddle-demo.
Mist lightly to dampen.
Secure the corners.
f)
04242018
