Performance Tool W50079 User manual
WARNING!
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions
contained on the product label and instruction manual prior to operation of this steam cleaner. The owner/operator
shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and while in use,
maintaining the unit in good working order. If the owner and/or operator are not fluent in English, the product warnings
and instructions shall be read and discussed in the operators’ native language by the purchaser/owner or his
designee. Make sure that the operator comprehends its contents. Safety information shall be emphasized and
understood prior to usage. The tool shall be inspected per the operating instructions.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
900W STEAM CLEANER
OWNERS MANUAL
Stock Number W50079
On occasion, after printing of our literature is completed, our manufacturers may make changes and/or modifications to merchandise which will not be reflected
in this manual. Although we strive to maintain complete and accurate information, it is possible in some instances, that the product may differ slightly from
printed specifications. Illustrations are intended for reference only. Actual merchandise may vary. Wilmar is not responsible for typographical errors.
Please read these instructions carefully and retain them for future use.
WARNING! READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS, AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO
SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
WARNING!
Danger of burns and/or scalding.
CAUTION!
1. Keep out of reach of children and do not use near anyone or anything not equipped with proper safety gear; safety
glasses, heat resistant gloves, protective outer clothing, etc.
2. To prevent electrical shock, do not immerse power cord or power plug in water or other liquids.
3. The power cord and plug should be in good condition and must not be damaged. Damaged or defective power cords
and plugs must not be used and should only be repaired by a qualified electrician.
4. This product is for use only in households and must not be used for industrial applications.
5. Do not turn on power supply until the tank is full of water.
6. During operation, ensure the safety cap is on as securely as possible.
7. In use, the machine body must not be inclined at more than 45 degrees, or boiling water will be sprayed out together
with steam.
8. Never direct the steam towards persons, animals or electrical products.
9. Before refilling with water, always unplug the machine. As soon as you have finished using the machine it must be
unplugged, it should only ever be plugged in when in use.
10. Only use water in the tank, do not add any rust remover, odor counteracting agent, alcohol or detergent into the tank,
this will cause damage to the tank.
11. Never open the supply tank during operation.
• IMPORTANT:neveroverfillthetank,otherwisethesteamwillnotbegeneratedproperly
• Disinfectionandsterilization:Recommendedaccessory:longnozzle,orlongnozzlewithextension.
The high-temperature steam will kill bacteria.
• Cleaningclothes:Recommendedaccessory:widenozzlewithtowelattachment.Hangclothingupinasafearea.
Pressthesteambuttonandmovethebrushupanddownandleftandrightuntilstainsshouldcomeoutofclothes.
• Cleaningdoorsandwindows:Recommendedaccessory:widenozzlewithsqueegeeattachment.Aimthespraynozzle
at the door/window, and press the steam button moving the brush over area to be cleaned.
• Cleaningthefloorboards:Recommendedaccessory:extensionwithanglednozzle.Usetheanglednozzletotarget
specificareasthatneedcleaning.Aimusingtheextensioninonehandandthesteamcleanerintheother.
SPECIFICATIONS
Rated Voltage/Frequency:................. 120V/60Hz
Rated Power: .................................... 900W
Power Cord: ...................................... 10ft/3M SVT/3, grounded
Input Power: ..................................... 120V AC, 60Hz
Working pressure: ............................ 45PSI
Max. Volume: .................................... 10oz. (300ml)
Heating time: .................................... 3-4 min
Continuous use: ................................ 8-10 min
Specifications are subject fo change without notice
IMPORTANT SAFETY INFORMATION
2
APPLICATIONS
1. Steam Cleaner Unit
2. 6 in. Long, 5 in. Wide Nozzle
3. 6.5 in. Straight nozzle
4. 20 in. Flexible Nozzle Extension
5. Measuring Cup
6. Cloth towel Attachment
7. Funnel
8. 1 in. Brush Nozzle
9. 90º Angle Nozzle
10. 8 in. Squeegee Attachment
CONTENTS
3
OPERATION
Set Up
1.
Unpacktheproduct,checktheaccessoriesandmanualsuppliedwiththeproductandensurethatthereareno
damaged or missing parts.
2. Beforeuse,pleasereadtheUserManualcarefully.Thesteamcleanerisnotdesignedforuseinindustrial
environments.Consultaprofessional.
3. Placethesteamcleaneronalevelplatform,pushdownthesafetycap,unscrewcapcounterclockwise,andthen
install the funnel.
4. Fillmeasuringcupwith6oz.(175ml)ofcleanwaterandaddthewaterintothetank.
NOTE: (Tank capacity is 8 oz. (250ml). Leave some excess space in the tank. Do not overll.
5. Re-installthesafetycapandtighten.
6. Pleaseinstallsuitableaccessoriesbeforeplugginginsteamer.
7. Checkthepowersupplyandsocket,andconrmtheycomplywiththerequirementsgivenintheUserManual.
Turn on the power supply.
8. Allowapproximately4minutesafterpowersupplyisturnedon,thenlightlypressthetriggertocheckforsufcient
steam.(Donotaimthespraynozzleatotherpersonsorobjects).
9. Ifthereissteamsprayedoutitisreadytouse.Presstriggerasneededtoreleasesteam.
1
3
8
2
56
7
4
9
10
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal rights.
Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of warranties and
remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A defective
product may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to place of purchase
immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge
any parts which our examination shall disclose to be defective and under warranty.
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal use and
service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which has been repaired
or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties apply to any product or part which has been
subject to misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied warranties of
any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability and no implied warranty
of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household use and not for commercial or
business use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an implied warranty of fitness
for a particular purpose), but only for the particular qualities or characteristics, and for the duration, expressly warranted above. The laws on
limitation of implied warranties may differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any product,
or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be the repair, or
replacement thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special damages may vary from state
to state, so the above limitations may not apply in all cases.
OPERATION CONT.
INSTALLING ACCESSORIES
• Forlargeraccessories(exibleextension,longspraynozzle,squeegee),eachhasalockingtabconnectionto
ensureapropersealandsecureattachment.Toinstallanattachment:
1. Placethedesiredaccessoryontothesteamcleaner.
2. Turn slowly while pressing lightly until the tab aligns with the accessory.
3. Pressandturnclockwise.Thereshouldbeatighttafteraslightclockwiseturn.
• Forthesmallerbrushandangleaccessoriespresstheopenendontothesteamclearernozzlermly,untilaccessory
is secure. NOTE this will only engage the outer clear o-ring, not the inner red o-ring.
• Tousetheexibleextensionhose,followdirections1-3above,andtherepeataccordinglydependingonwhich
accessory you intend to use.
• Thesqueegeeandtowelaccessoriesaredesignedforusethe6in.x5in.widebrushattachment.
1. Towel–pullthetowelovertheouteredgesofthewidebrush.Itisdesignedtobeasnugt
2. Squeegee – place the two small tabs on the back end of the squeegee into the loops on the back end of the wide
nozzle,thenpressthefrontofthewidenozzlesoitsnapsintotheclipatthefrontofthesqueegee.
• Reversedirectionstoremoveanyaccessory
REFILL WATER DURING OPERATION
1. Unplugthepowercordanddisconnectthepowersupply.
2. Pressdownthetriggertoreleasethepressureuntilnomoresteamisdispensed.
3. Slowly unscrew the safety cap but do not remove it, any residual steam will be discharged slowly until no steam comes
out.Thenplacethesteamcleanerinacoolplacetocoolitdownforaboutveminutes.
4. Finally, completely remove the safety cap.
5. Usethefunnelandmeasuringcuptorellasuitablequantityofcoldorhotwaterintothetank.
6. Re-installthesafetycapontothesteamcleanerbodyandtightenitinposition.
CLEANING/STORAGE
1. Repeatssteps1-4above.
2. Emptytheresidualwaterinthetankandcleantheexternalsurfacewithapieceofdrycloth.
3. Re-installthesafetycapontothesteamcleanerbodyandtightenitinposition.
4. Notes:Re-installthesafetycapontothesteamcleanerbodyandtightenitinposition.
WARNING: NEVER REMOVE THE CAP OR ANY ACCESSORIES WHILE STEAM CLEANER IS IN USE.
Check out the collection of power tools we offer.
Table of contents
