Pet Gear ON-THE-GO Pet PG1040NZ User manual

INSTRUCTION MANUAL
VIEW 360 CARRIER
PG1040NZ
To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet™

2
PARTS LIST
PRODUCT SET UP
VIEW 360 CARRIER • PG1040NZ
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
View 360 Carrier
Unfold metal wires on the bottom of the View 360 Carrier.
Fully Opened

3VIEW 360 CARRIER • PG1040NZ
Secure Velcro Here
Secure Velcro Here
Secure Velcro Here
Secure Velcro Here
Secure Velcro Here
Secure bottom velcro points first to the bottom wires.
Push button to open carrier.
On both sides of the View 360 Carrier
velcro side points and secure.
Latch can be pushed
down to be closed.
Push button to open.

Never leave your pet unattended in your car. Always use a pet harness.
Place seat belt through the seat belt strap located on the back of car seat/carrier.
Seat Belt
Strap
Seat Belt
Strap
VIEW 360 CARRIER • PG1040NZ
4
Click seat belt into place.

5
VIEW 360 CARRIER • PG1040NZ
WARNING!
REPLACEMENT PARTS
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw
aggressively. Do not leave your pet unattended.
PET GEAR is not liable for any damage caused by aggressive,
warnings and the instructions could result in serious injury or death.
Use only PET GEAR replacement parts.
Please have your model number ready before calling.
You can also request parts: http://www.petgearinc.com/main.asp?sel=2
192 Sheldon Avenue • West Rutland, VT 05777 • 877-752-9123 • www.petgearinc.com