Pet Gear HAPPY TRAILS LITE User manual

To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet™
INSTRUCTION MANUAL
HAPPY TRAILS LITE
NO-ZIP PET STROLLER
PG8030NZ
Interior Dimensions:
22"L x 10"W x 19"H

HAPPY TRAILS LITE NO-ZIP PET STROLLER • PG8030NZ
2
PARTS LIST
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
Stroller
Back Tray
2-Front Wheel
Assembly 2-Rear Wheels
2-Washers 2-Cotter Pins 2-Hub Caps
Rear Axle Assembly
OPENING THE STROLLER
Step 1. Release locking latch Step 2. Unfold as shown.
Make sure both locks snap into place.

HAPPY TRAILS LITE NO-ZIP PET STROLLER • PG8030NZ 3
OPENING THE STROLLER
Canopy
TO ASSEMBLE REAR WHEELS
Step 1. Slide wheel assembly onto axle.
Step 2. Slide washer onto axle.
Step 3. Fit straight part of cotter pin through
hole on axle.
Step 4. Line up each of the tabs in the hub cap with
the slots in the wheel, snap hub cap into place.
Step 5. Repeat for other side.
Spread the canopy apart
to the open position.

HAPPY TRAILS LITE NO-ZIP PET STROLLER • PG8030NZ
4
Step 1. Place front wheels unit on leg with locking lever
pointing downward.
Step 2. Press locking lever and slide swivel housing
onto front leg.
Step 3. Release locking lever.
TO ASSEMBLE FRONT WHEELS
Step 1. Turn stroller over.
Step 2. Position rear axle assembly as shown.
Step 3. Push rear axle onto frame until it clicks and
locks into place on both sides.
NOTE: Pull down rmly on the brackets to be sure
they are securely attached to the stroller’s rear legs.
TO ASSEMBLE REAR AXLE TO FRAME
APPLYING THE BRAKES
Step 1. Push levers on both rear wheels down to lock.
Step 2. Pull levers up to unlock.
WARNING: Never leave your stroller parked without applying brakes.
Unlock
Lock

HAPPY TRAILS LITE NO-ZIP PET STROLLER • PG8030NZ 5
Step 1. To close compartment,
pull downward to latch clip onto
frame.
Step 2. Lift up on latch clip and
secure by pushing down until it
locks.
TO SECURE COMPARTMENT TO FRAME
TO SECURE LATCH
Step 1. Open stroller and
pull compartment down.
Step 2. Clip onto frame.

HAPPY TRAILS LITE NO-ZIP PET STROLLER • PG8030NZ
6
To help secure compartment, Velcro aps around
tube and fasten to the bottom of the compartment.
TO SECURE SIDE FLAP
Pull upward on latch clip to release.
TO UNLOCK LATCH
TO ASSEMBLE BACK TRAY
Step 1. To assemble the back tray, rst
align a hole on one side of the tray with
one of the bolts on the handle of the same
side of the stroller.
Step 2. Snap one side of the tray over
the bolt on the handle then repeat for the
other side.

HAPPY TRAILS LITE NO-ZIP PET STROLLER • PG8030NZ 7
Unwrap the
Velcro aps from
around tube.
Flaps need to be unwrapped on both
sides of the stroller.
Unlock latch. Open the canopy.
FOLDING THE STROLLER
Step 2. Pull upward to unclip the compartment
from the frame.
Step 3. Pull upward on the compartment. At this
point, please make sure that latch is unlocked, the
canopy is open, and the 2 Velcro aps from around
tubes on both sides of the stroller are unwrapped.
Step 1. For ease in folding the stroller, unlock latch, open the canopy, and unwrap the Velcro aps from around
tube on both sides of the stroller.

HAPPY TRAILS LITE NO-ZIP PET STROLLER • PG8030NZ
8
Step 1. Before folding the stroller, lock the
brakes and close the canopy.
Step 2. Standing behind the stroller, pull up on
both side latches.
Step 3. Fold as shown.
Step 4. Engage locking latch.
NOTE: Fold stroller so wheels straddle frame. DO NOT allow wheels to press against frame
as this may damage tires.
FOLDING THE STROLLER

HAPPY TRAILS LITE NO-ZIP PET STROLLER • PG8030NZ
LOOKING AFTER YOUR STROLLER
WHEEL MAINTENANCE
• Always store product in a clean, dry place.
• Not recommended for use on the beach.
• Do not put heavy items on top of the stroller.
• Clean frame by wiping with a lightly oiled cloth.
• Do not use detergent or abrasives. Spot clean fabric with dry cleaning uid or mild soap
and warm water.
• To ensure easy maneuverability and to minimize wear and tear, (especially wheels, axles,
and swivels), keep all moving parts clean and lubricated with WD40®or light machine oil.
• NOTE: Do not lubricate brake components or swivel locks.
• Regularly check stroller for loose parts. These should be tightened or replaced.
• To clean and lubricate front and rear wheels, push out locking lever under wheel housing
to release rear wheel.
• To ensure ease of maneuverability and to minimize wear and tear, keep all moving parts
clean and lubricated with WD40®or light machine oil.
• Push wheel sets back on until they click and lock in position; pull on wheel housings to
ensure they are secure.
• Push stroller back and forth and rotate swivels around to work in lubricant.
• Clean the rear wheel assembly and the rest of the frame with warm, soapy water; clean
off with warm water and dry thoroughly.
• NOTE: Do not lubricate brake components or swivel locks.
9

HAPPY TRAILS LITE NO-ZIP PET STROLLER • PG8030NZ
10
WARNING!
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw
aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive,
destructive, immature or untrained animals. Do not use near an open or exposed ame. Failure to follow these
warnings and the instructions could result in serious injury or death.
• Do not carry additional bags, goods, or accessories in or on stroller except as recommended
in the manufacturer’s instructions.
• Recommended use of an approved safety restraint correctly tted and adjusted.
• Do not leave pet unsupervised in stroller.
• Before making adjustments to stroller ensure that pet’s body is clear of any moving parts.
• This stroller is designed for one pet only.
• Do not hang bags from handles as this may cause the product to become unstable.
• Do not use on escalator or stairs; fold stroller and carry.
• Put on brake whenever you park the stroller.
• Ensure stroller is completely erected and check that all locks are engaged before placing pet
in stroller.
• Do not overload as stroller may become unstable; maximum weight of pet using this stroller
not to exceed 25 lbs.
• Any goods carried in the basket not to exceed 6 lbs.
REPLACEMENT PARTS
Use only PET GEAR replacement parts.
Please have your model number ready before calling.
You can also request parts: http://www.petgearinc.com/main.asp?sel=2
192 Sheldon Avenue • West Rutland, VT 05777 • 877-752-9123 • www.petgearinc.com