Pet Gear HOME ‘N GO PET PEN User manual

INSTRUCTION MANUAL
HOME ‘N GO PET PEN
PG4200LS
To see our full line of products, visit us online at: www.petgearinc.com
CUSTOMER SERVICE HELP DESK
[email protected]
Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday
For The ON-THE-GO Pet™

2
PARTS LIST
SET UP
Pen
HOME ‘N GO PET PEN • PG4200LS
DO NOT push center down yet.
Step 1. When setting up, lock rails BEFORE lowering
secondary latch.
Step 2. Be sure top rails have become rigid.
If not, pull up again until they are rigid.
If top rails do not latch, push the button of the legs
toward each other.
Check that you have all the parts shown BEFORE assembling your product.
If any parts are missing, call Customer Service.
Removable
Liner
Secondary
Latch

3
ASSEMBLY
Step 3. Engage secondary latch by pushing tubes
down to the oor and turning secondary latch.
Repeat this so all four sides have the secondary
lock engaged.
HOME ‘N GO PET PEN • PG4200LS
Step 2. DO NOT unlock top rails yet.
Release secondary latch.
Lift up on tubes to create a “V” shape on all four sides.
Secondary Latch
Step 1. Remove liner.
TO FOLD
Step 4. Insert removable liner.
Secondary Latch

HOME ‘N GO PET PEN • PG4200LS
4
*If top rails do not unlatch, DO NOT FORCE.
Push the bottom of the legs toward each other.
*Both tubes must be released for the top rail to fold.
Step 4. Do Not Force. If unit will not fold, look for a
partially latched top rail.
Squeeze the latch button to release the rail.
TO FOLD
Step 3. Secondary latch must
be released and tubes pulled
up to create a “V” shape.
Lift up slightly on the top rail.
Push in on the button located
on the side of the top rail to
release the two tubes.
Push down.

HOME ‘N GO PET PEN • PG4200LS 5
CARE AND MAINTENANCE
AVOIDING SUFFOCATION HAZARDS
SETTING UP THE PET PLAY AREA
From time to time, check your Pet Play Area for worn parts, torn material or stitching.
To clean Pet Play Area, use only household soap or detergent and warm water.
Never use plastic shipping bags or other plastic lm as pad covers not sold and intended for that purpose.
They can cause suffocation. This product is not intended for commercial use.
THIS PRODUCT REQUIRES ADULT ASSEMBLY.
Be sure the Pet Pen is completely set up before use.
Always follow the instructions in the product instructions to set up the Pet Pen.
Before each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges.
Do not use the Pet Pen if any parts are missing or broken.
Call PET GEAR at 1-877-752-9123 for replacement parts. Use only PET GEAR replacement parts.
Visit our website www.petgearinc.com to view or download the product instructions.
Do not substitute parts.
USING THE PET PLAY AREA
Remove collar and leashes while using this product. The Pet Pen is for playing or sleeping.
When used for playing, never leave pet unattended and always keep pet in view. When used for
sleeping, you must still provide the supervision necessary for the continued safety of your pet.
Always keep the Pet Pen away from hazards in the area that may injure your pet.
DO NOT leave pet in product for prolonged periods of time.

HOME ‘N GO PET PEN • PG4200LS
6
WARNING!
REPLACEMENT PARTS
FOR PETS ONLY.
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw
aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive,
destructive, immature or untrained animals. Do not use near an open or exposed ame. Failure to follow these
warnings and the instructions could result in serious injury or death.
Use only PET GEAR replacement parts.
Please have your model number ready before calling.
You can also request parts: http://www.petgearinc.com/main.asp?sel=2
192 Sheldon Avenue • West Rutland, VT 05777 • 877-752-9123 • www.petgearinc.com