Petdwell ON2PETS User manual

SMALL
2
Cat Tree Small
2
Dear Customer,
We want to thank you for your purchase and we hope that both you
and your cat will enjoy our product. Please let us know if you have any
comments or suggestions on how to improve your overall experience.
This product is not intendented for human use, keep away from
children. Be aware that some parts could be swallowed by your cat,
specially the pads located under the perches and leaves. Although
these events are extremly rare, they could eventually happen; if this
occurs, stop the use of the product immediately and check our return
and warranty policies. Please contact us if you have any questions.
We would like to feature our customers in our social meadia channels
and we invite you to send us pictures or videos of your cat using our
product at @on2pets for Instagram and On2Pets for Facebook.
Again thank you very much for your preference.
Sincerely,
On2Pets

ASSEMBLY INSTRUCTIONS
PA R TS
LARGE ROD (x1) BASE (x1)
PERCH (x1)
BASE TRUNK (x1)
STEP
2
2B
Make tree stable by
rotating the perch until
completely tightened,
while stepping on base.
Place perch (C2) over
base trunk (B2).
Make sure the small
wooden circle ts inside
the trunk, press down
and rotate until tight.
2A
Important Reminder: Please rotate perch
until completely tightened so that perch
locks into place and cannot be rotated
any further. The tree must be completely
stable prior to cat's rst use.
STEP1
Screw large rod (A1)
into the base (B1)
until tight.
1B
Adjust base (B1)
using the four
leveling guides
underneath to
ensure base is
stable and level.
1A
Place base trunk
(B2) in the
wooden circle
on base (B1).
1C