Phanteks GLACIER C360A User manual

INSTALLATION GUIDE V1.0
AMD AM4 cpu block
GLAC IER C360A
PH-C360A_01
PACKAGE CONTENTS
WARNING - This product is intended for advanced users. Improper installation may result in damage to your equipment.While all eorts have
been made to provide the most comprehensive information possible, Phanteks assumes no liability expressed or implied for any damage(s) occurring to your
components as a result of using Phanteks cooling products, either due to mistake or omission on our part in the below instructions, or due to failure or defect in
the Phanteks cooling products. Do not disassemble the water block.Warranty will be voided.
Turn o the power to your system and discharge your body’s static electric charge before proceeding with the installation procedure. If you do not feel comfortable
with performing the installation procedure, consult a qualied computer technician.
For latest version check www.Phanteks.com
STEP 1. BACKPLATE INSTALLATION
STEP 2. THERMAL PASTE APPLICATION
GLACIER C360A
QTY: 1
Cover Plates BK/CR
QTY: 2
AM4 Mounting Screw
QTY: 4
AM4 Stando
QTY: 4
Spring & Washer
QTY: 4
Phanteks D-RGB Cable
QTY: 1
Phanteks Thermal Paste
QTY: 1
D-RGB MB Adapter
QTY: 1
2.5mm Allen Key
QTY: 1
The original CPU backplate is secured with
the 4x Standos to the motherboard.
Apply a pea-size drop of thermal paste to
the center of the CPU.
4x

STEP 3. SCREW PREPARATION
STEP 5. CONNECT D-RGB STRIP
Connect the D-RGB cable to the LED strip
in the block. You can lift o the magnetic
cover for easy access.
4x
4x
Assemble the AM4 Mounting Screw, Spring
and Washer. Do this 4 times.
STEP 4. C360A INSTALLATION
Mount the C360A Block on the
CPU Socket and secure it with 4x prepared
AM4 Mounting Screws.
Do not overtighten the AM4 Screws.
(Max 1.5N/m)
Connect to
Phanteks Case / Motherboard Cable
You can connect the D-RGB cable to a
compatible motherboard with the
included D-RGB MB adapter.
All Phanteks D-RGB products can be
daisy-chained together.
ADDRESSABLE ADDRESSABLERAINBOW
Compatible with: