Philco Phd 451b User manual

INDUCTION

GLASS-CERAMIC HOB

OWNER’S MANUAL

PHD 451B

Dear customer,

Thank you for buying a PHILCO brand product. So that your appliance serves you well, please read all

the instructions in this user’s manual.

EN - 1

CONTENTS

PART 1: SAFETY INFORMATION......................................................................................................................2

PART 2: DESCRIPTION OF THE APPLIANCE...................................................................................................7

Technical characteristics.................................................................................................................................................................. 7

Control panel....................................................................................................................................................................................... 8

PART 3: USE OF THE APPLIANCE ....................................................................................................................8

Display.................................................................................................................................................................................................... 8

Ventilation.............................................................................................................................................................................................8

PART 4: STARTINGUP AND APPLIANCE MANAGEMENT ............................................................................9

Before the rst use.............................................................................................................................................................................9

Induction principle............................................................................................................................................................................ 9

Sensitive touch.................................................................................................................................................................................... 9

Power selection zone“SLIDER”and timer setting zone........................................................................................................9

Starting-up .........................................................................................................................................................................................10

Pan detection.....................................................................................................................................................................................10

Residual heat indication................................................................................................................................................................10

Booster function...............................................................................................................................................................................11

Timer.....................................................................................................................................................................................................12

Automatic cooking..........................................................................................................................................................................13

Pause function...................................................................................................................................................................................13

Recall Function..................................................................................................................................................................................13

« Keep warm » Function.................................................................................................................................................................14

Control panel locking.....................................................................................................................................................................14

PART 5: COOKING ADVICES ..........................................................................................................................15

Pan quality..........................................................................................................................................................................................15

Pan dimension...................................................................................................................................................................................15

Examples of cooking power setting..........................................................................................................................................16

PART 6: MAINTENANCE AND CLEANING.....................................................................................................16

PART 7: WHAT TO DO IN CASE OF A PROBLEM ...........................................................................................17

PART 8: INSTALLATION INSTRUCTIONS ......................................................................................................19

PART 9: ELECTRICAL CONNECTION .............................................................................................................20

Connection of the hob...................................................................................................................................................................20

This appliance has been tested in accordance with the directives in force in the European Union.

This appliance conforms to the relevant safety provisions for electrical appliances in force in the

European Union.

Dear customer,

Thank you for having chosen a induction hob.

In order to install properly your appliance and to make the best use of it, please read this entire instruction

manual carefully.

EN - 2

PART 1: SAFETY INFORMATION

PRECAUTIONS BEFORE USING

 UNPACK ALL THE MATERIALS.

 THE INSTALLATION AND CONNECTING OF THE APPLIANCE

HAVE TO BE DONE BY APPROVED SPECIALISTS. THE

MANUFACTURER CANNOT BE RESPONSIBLE FOR DAMAGE

CAUSED BY BUILDINGIN OR CONNECTING ERRORS.

 TO BE USED, THE APPLIANCE MUST BE WELLEQUIPPED

AND INSTALLED IN A KITCHEN UNIT AND AN ADAPTED AND

APPROVED WORK SURFACE.

 THIS DOMESTIC APPLIANCE IS EXCLUSIVELY FOR THE COOKING

OF FOOD, TO THE EXCLUSION OF ANY OTHER DOMESTIC,

COMMERCIAL OR INDUSTRIAL USE.

 REMOVE ALL LABELS AND SELFADHESIVES FROM THE

CERAMIC GLASS.

 DO NOT CHANGE OR ALTER THE APPLIANCE.

 THE COOKING PLATE CANNOT BE USED AS FREESTANDING OR

AS WORKING SURFACE.

 THE APPLIANCE MUST BE GROUNDED AND CONNECTED

CONFORMING TO LOCAL STANDARDS.

 DO NOT USE ANY EXTENSION CABLE TO CONNECT IT.

 THE APPLIANCE CANNOT BE USED ABOVE A DISHWASHER OR A

TUMBLEDRYER:

STEAM MAY DAMAGE THE ELECTRONIC APPLIANCES.

EN - 3

 THE APPLIANCE IS NOT INTENDED TO BE OPERATED BY MEANS

OF EXTERNAL TIMER OR SEPARATE REMOTE CONTROL SYSTEM.

 CAUTION : THE COOKING PROCESS HAS TO BE SUPERVISED.

A SHORT TERM COOKING PROCESS HAS TO BE SUPERVISED

CONTINUOUSLY.

USING THE APPLIANCE

 SWITCH THE HEATING ZONES OFF AFTER USING.

 KEEP AN EYE ON THE COOKING USING GREASE OR OILS: THAT

MAY QUICKLY IGNITE.

 BE CAREFUL NOT TO BURN YOURSELF WHILE OR AFTER USING

THE APPLIANCE.

 MAKE SURE NO CABLE OF ANY FIXED OR MOVING APPLIANCE

CONTACTS WITH THE GLASS OR THE HOT SAUCEPAN.

 MAGNETICALLY OBJECTS CREDIT CARDS, FLOPPY DISKS,

CALCULATORS SHOULD NOT BE PLACED NEAR TO THE

ENGAGED APPLIANCE.

 METALLIC OBJECTS SUCH AS KNIVES, FORKS, SPOONS AND

LIDS SHOULD NOT BE PLACED ON THE HOB SURFACE SINCE

THEY CAN GET HOT.

 IN GENERAL DO NOT PLACE ANY METALLIC OBJECT EXCEPT

HEATING CONTAINERS ON THE GLASS SURFACE. IN CASE OF

UNTIMELY ENGAGING OR RESIDUAL HEAT, THIS ONE MAY HEAT,

MELT OR EVEN BURN.

 NEVER COVER THE APPLIANCE WITH A CLOTH OR A

PROTECTION SHEET. THIS IS SUPPOSED TO BECOME VERY HOT

AND CATCH FIRE.

EN - 4

 THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8

YEARS AND ABOVE AND PERSONS WITH REDUCED PHYSICAL,

SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE

AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR

INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE

WAY AND UNDERSTAND THE HAZARDS INVOLVED.

 CHILDREN SHALL NOT PLAY WITH THE APPLIANCE.

 CLEANING AND USER MAINTENANCE SHALL NOT BE MADE BY

CHILDREN WITHOUT SUPERVISION.

PRECAUTIONS NOT TO DAMAGE THE APPLIANCE

 RAW PAN BOTTOMS OR DAMAGED SAUCEPANS NOT

ENAMELLED CAST IRON POTS, MAY DAMAGE THE CERAMIC

GLASS.

 SAND OR OTHER ABRASIVE MATERIALS MAY DAMAGE CERAMIC

GLASS.

 AVOID DROPPING OBJECTS, EVEN LITTLE ONES, ON THE

VITROCERAMIC.

 DO NOT HIT THE EDGES OF THE GLASS WITH SAUCEPANS.

 MAKE SURE THAT THE VENTILATION OF THE APPLIANCE WORKS

ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.

 DO NOT PUT OR LEAVE EMPTY SAUCEPANS ON THE

VITROCERAMIC HOBS.

 SUGAR, SYNTHETIC MATERIALS OR ALUMINIUM SHEETS MUST

NOT CONTACT WITH THE HEATING ZONES. THESE MAY CAUSE

BREAKS OR OTHER ALTERATIONS OF THE VITROCERAMIC GLASS

BY COOLING: SWITCH ON THE APPLIANCE AND TAKE THEM

IMMEDIATELY OUT OF THE HOT HEATING ZONE BE CAREFUL:

DO NOT BURN YOURSELF.

EN - 5

 WARNING: DANGER OF FIRE: DO NOT STORE ITEMS ON THE

COOKING SURFACE.

 NEVER PLACE ANY HOT CONTAINER OVER THE CONTROL

PANEL.

 IF A DRAWER IS SITUATED UNDER THE EMBEDDED APPLIANCE,

MAKE SURE THE SPACE BETWEEN THE CONTENT OF THE

DRAWER AND THE INFERIOR PART OF THE APPLIANCE IS LARGE

ENOUGH 2 CM. THIS IS ESSENTIAL TO GUARANTYA CORRECT

VENTILATION.

 NEVER PUT ANY INFLAMMABLE OBJECT EX. SPRAYS INTO

THE DRAWER SITUATED UNDER THE VITROCERAMIC HOB. THE

EVENTUAL CUTLERY DRAWERS MUST BE RESISTANT TO HEAT.

PRECAUTIONS IN CASE OF APPLIANCE FAILURE

 IF A DEFECT IS NOTICED, SWITCH OFF THE APPLIANCE AND

TURN OFF THE ELECTRICAL SUPPLYING.

 IF THE CERAMIC GLASS IS CRACKED OR FISSURED, YOU MUST

UNPLUG THE APPLIANCE AND CONTACT THE AFTER SALES

SERVICE.

 REPAIRING HAS TO BE DONE BY SPECIALISTS. DO NOT OPEN

THE APPLIANCE BY YOURSELF.

 WARNING: IF THE SURFACE IS CRACKED, SWITCH OFF THE

APPLIANCE TO AVOID THE POSSIBILITY OF ELECTRIC SHOCK.

OTHER PROTECTIONS

EN - 6

OTHER PROTECTIONS

 NOTE SURE THAT THE CONTAINER PAN IS ALWAYS CENTRED ON

THE COOKING ZONE. THE BOTTOM OF THE PAN MUST HAVE TO

COVER AS MUCH AS POSSIBLE THE COOKING ZONE.

 FOR THE USERS OF PACEMAKER, THE MAGNETIC FIELD COULD

INFLUENCE ITS OPERATING. WE RECOMMEND GETTING

INFORMATION TO THE RETAILER OR OF THE DOCTOR.

 DO NOT TO USE ALUMINIUM OR SYNTHETIC MATERIAL

CONTAINERS: THEY COULD MELT ON STILL HOT COOKING

ZONES.

 NEVER TRY TO EXTINGUISH A FIRE WITH WATER, BUT SWITCH

OFF THE APPLIANCE AND THEN COVER FLAME E.G. WITH A LID

OR A FIRE BLANKET.

THE USE OF EITHER POOR QUALITY POT OR ANY INDUCTION

ADAPTOR PLATE FOR NON-MAGNETIC COOKWARE RESULTS

IN A WARRANTY BREACH. IN THIS CASE, THE

MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY

DAMAGE CAUSED TO THE HOB AND/OR ITS ENVIRONMENT.

EN - 7

PART 2: DESCRIPTION OF THE APPLIANCE

Technical characteristics

Type PHD451B

Total power

Energy consumption for the hob EChob**

5800 W

169 Wh/kg

Front left heating zone

Minimum detection

Nominal power*

Booster power*

Standardised cookware category**

Energy consumption ECcw**

Ø 215 mm

Ø 100 mm

2300 W

3000 W

173.7 Wh/kg

Rear left heating zone

Minimum detection

Nominal power*

Booster power*

Standardised cookware category**

Energy consumption ECcw**

Ø 175 mm

Ø 100 mm

1100 W

1400 W

166.7 Wh/kg

Right heating zone

Minimum detection

Nominal power*

Booster power*

Standardised cookware category**

Energy consumption ECcw**

Ø 1750 mm

100 mm

1100 W

1400 W

166.7 Wh/kg

* The given power may change according to the dimensions and material of the pan.

** Calculated according to the method of measuring performance (EN 60350-2).

EN - 8

Control panel

Timer display

Keep warm key

Pause/RecallBooster

On/O key

Control light

timer selection

Control light

cooking zone

Control light

Pause/Recall

Cooking zone

selection

Control light

On/O

Power

display

Power selection zone“SLIDER” and

timer setting zone

PART 3: USE OF THE APPLIANCE

Display

Display Designation Function

0Zero The heating zone is activated.

1…9 Power level Selection of the cooking level.

U Pan detection No pan or inadequate pan.

A Heat accelerator Automatic cooking

E Error message Electronic failure.

P Booster The boosted power is activated.

H Residual heat The heating zone is hot.

L Locking Control panel locking.

U Keep warm Maintain automatically of 70°C

ll Pause The hob is in pause

Ventilation

The cooling system operates continuously. He starts when turning on the hob and speeds up when the hob

is used intensively. The cooling fan reduces its speed and stops automatically when theelectronic circuit is

cooled enough.

EN - 9

PART 4: STARTING-UP AND APPLIANCE MANAGEMENT

Before the rst use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent which risks

causing blue-tinted colour on the glass surface.

Induction principle

An induction coil is located under each heating zone. When it is engaged, it produces a variable

electromagnetic eld which produces inductive currents in the ferromagnetic bottom plate of the pan.

The result is a heating-up of the pan located on the heating zone.

Of course the pan has to be adapted:

· All ferromagnetic pans are recommended (please verify it thanks a little magnet): cast iron and steel

pans, enamelled pans, stainless-steel pans with ferromagnetic bottoms…

· Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware,…

The induction heating zone adapts automatically the size of the pan. With a too small diameter the pan

doesn’t work. This diameter is varying in function of the heating zone diameter.

If the pan is not adapted to the induction hob the display will show [ U ].

Sensitive touch

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your nger presses

the key, the corresponding command is activated. This activation is validated by a control light, a letter or a

number in the display and/or a“beep”sound.

In the case of a general use press only one key at the same time.

Power selection zone“SLIDER” and timer setting zone

To select the power with the slider, slide your nger on the “SLIDER” zone. You can also have a direct access if

you put your nger directly on the chosen level.

Power selection zone“SLIDER” and timer

setting zone

“SLIDER“ Direct access

EN - 10

Starting-up

You must rst switching on the hob, then the heating zone:

· Start-up/ switch o the hob:

Action Control panel Display

To start Press key [ 0/l ] [ 0 ] are blinking

To stop Press key [ 0/l ] Nothing or [ H ]

· Start-up/ switch o a heating zone:

Action Control panel Display

To choice the zone Press display [ 0 ] selected [ 0 ] and control light on

To set

(adjust the power)

Slide on the“SLIDER” to the right

or to the left

[ 1 ] to [ 9 ]

To stop Slide to [ 0 ] on the“SLIDER” or

press on [ 0 ]

[ 0 ] or [ H ]

If no action is made within 20 second the electronics returns in waiting position.

Pan detection

The pan detection ensures a perfect safety. The induction doesn’t work:

· If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case it is

impossible to increase the power and the display shows [ U]. This symbol disappears when a pan is put

on the heating zone.

· If the pan is removed from the heating zone the operation is stopped. The display shows [ U]. The symbol

[ U] disappears when the pan is put back to the heating zone. The cooking continues with the power

level set before.

After use, switch the heat element o: don’t let the pan detection [ U] active.

Residual heat indication

After the switch o of a heating zone or the complete stop of the hob, the heating zones are still hot and

indicates [ H ] on the display.

The symbol [ H ] disappears when the heating zones may be touched without danger.

As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any heat

sensitive object on them. There are risks of burn and re.

EN - 11

Booster function

The booster function [ P ] grants a boost of power to the selected heating zone.

If this function is activated the heating zones works during 10 minutes with an ultra high power.

The booster is foreseen for example to heat up rapidely big quantities of water, like nuddles cooking.

· Start up / Stop the booster function:

Action Control panel Display

Zone selection Press key [ 0 ] from the zone [ 0 ] and control light on

Start up the booster Press key [ P ] [ P ]

Stop the booster Slide on the“SLIDER“ or

press on [ P ]

[ P ] to [ 0 ]

[ 9 ]

· Power management :

The whole cooking hob is equipped to give a maximum amount of power. When the booster function is

activated, and not to exceed the maximum power, the electronic system orders to reduce automatically

the power level of an other heating zone. The display is blinking on [ 9 ] during a few seconds and then

shows the maximum of power allowed ( [ 6 ] or [ 8 ] ).

Heating zone selected The other heating zone: (example: power level 9)

[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone

EN - 12

Timer

The timer is able to be used simultaneous with all heating zones and this with dierent time settings (from 0

to 99 minutes) for each heating zone.

· Setting and modication of the cooking time:

Example for 16 minutes at power 7:

Action Control panel Display

Zone selection Press display [ 0 ] [ 0 ] and control light on

Select the power level Slide on the“SLIDER“ to [ 7 ] [ 7 ]

Select « Timer » Press display [ CL ] [ 00 ]

Set the units Slide on the“SLIDER“ to [ 6 ] [ 0 ] xed ] [ 6 blinking ]

Valid the units Press display [ 06 ] [ 0 blinking ] [ 6 xed ]

Set the tens Slide on the“SLIDER“ to [ 1 ] [ 1 blinking ] [ 6 xed ]

Valid the tens Press display [ 16 ] [ 16 ]

The time is conrmed and the cooking starts.

· To stop the cooking time:

Example for 13 minutes at power 7:

Action Control panel Display

Zone selection Press display [ 7 ] selected [ 0 ] and control light on

Select « Timer » Press key [ 13 ] [ 13 ]

Deactivate the units Slide on the“SLIDER“ to [ 0 ] [ 1 xed ] [ 0 blinking ]

Valid the units Press display [ 10 ] [ 1 blinking ] [ 0 xed ]

Deactivate the tens Slide on the“SLIDER“ to [ 0 ] [ 0 blinking ] [ 0 xed ]

Valid the tens Press display [ 00 ] [ 00 ]

· Automatic stop at the end of the cooking time:

As soon as the selected cooking time is nished the timer displays blinking [ 00 ] and a sound rings.

To stop the sound and the blinking it is enough to press the key [ 00 ].

· Egg timer function:

Example for 29 minutes :

Action Control panel Display

Activate the hob Press display [ 0/I ] Zone control lights are on

Select « Timer » Press display [ CL ] [ 00 ]

Set the units Slide on the“SLIDER“ to [ 9 ] [ 0 xed ] [ 9 blinking ]

Valid the units Press display [ 09 ] [ 0 blinking ] [ 9 xed ]

Set the tens Slide on the“SLIDER“ to [ 2 ] [ 2 blinking ] [ 9 xed ]

Valid the tens Press display [ 29 ] [ 29 ]

After a few seconds the control light stops blinking.

As soon as the selected cooking time is nished the timer display will blink [ 00 ] and a sound rings.

To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches o.

EN - 13

Automatic cooking

All the cooking zones are equipped with an automatic“go and stop”cooking device. The cooking zone starts

at full power during a certain time, then reduces automatically its power on the preselected level.

· Start-up:

Action Control panel Display

Zone selection Press display [ 0 ] selected [ 0 ] and control light on

Full power setting Slide on the“SLIDER“ to [ 9 ] Pass from [ 0 ] to [ 9 ]

Automatic cooking Re-press on display“SLIDER“ [ 9 ] [ 9 ] is blinking with [ A ]

Power level selection

(for example « 7 »)

Slide on the“SLIDER“ to [ 7 ] [ 9 ] pass to [ 8 ] [ 7 ]

[ 7 ] is blinking with [ A ]

· Switching o the automatic cooking:

Action Control panel Display

Zone selection Press [ 7 ] from the zone [ 7 ] blinking

with [ A ]

Power level selection Slide on the“SLIDER“ [ 1 ] to [ 9 ]

Pause function

This function brakes all the hob’s cooking activity and allows restarting with the same settings.

· Start-up:

Action Control panel Display

Engage pause Press [ II ] key during 2s Displays [ II ] in the heating

zone displays

Stop the pause during 2s Press [ II ] key blinking

Press an other touch or slide on

the“SLIDER“

Pause control light is on

Pause control light is o

Recall Function

After switching o the hob ( 0/I ), it is possible to recall the last settings.

· Cooking stages of all cooking zones (power).

· Minutes and seconds of programmed cooking zone-related timers.

· Heat up function.

The recall procedure is following:

· Press the key [ 0/I ].

· Then press the key [ II ] within 6 seconds.

The precedent settings are activated.

EN - 14

« Keep warm » Function

This function allows to reach and maintain automatically a temperature of 70°C.

This will avoid liquids overowing and fast burning at the bottom of the pan.

· To engage, to start the function « Keep warm »:

Action Control panel Display

Zone selection Press display [ 0 ] selected [ 0 ] to [ 9 ] or [ H ]

To engage Press on key [ U ] on the“SLIDER“ [ U ]

To stop slide on the“SLIDER“ Press on display [ U ] selected [ 0 ]

to [ 9 ] or [ H ]

[ U ]

This function can be started independently on all the heating zones.

When the pan leaves the cooking zone of the“Keep warm”function remains active during approximately 10

minutes.

The maximum duration of keeping warm is 2 hours.

Control panel locking

To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning the

control panel can be locked (with exception to the On/O key [ 0/l ]).

· Locking:

Action Control panel Display

Start Press key [ 0/l ] [ 0 ] or [ H ] on displays

Hob locking Press simultaneously [ P ] and [ O ] No modication

Re-press on display [ 0 ] from the

right zone display

[ L ] on displays

· Unlocking:

Action Control panel Display

Start Press key [ 0/l ] [ L ] on displays

In the 5 seconds after start:

Unlocking the hob Press simultaneously [ P ] and [ L ]

from the right zone display

[ 0 ] or [ H ] on displays

Press on key [ P ] No light on the displays

EN - 15

PART 5: COOKING ADVICES

Pan quality

Adapted materials: steel, enamelled steel, cast iron, ferromagnetic stainless-steel, aluminium

with ferromagnetic bottom.

Not adapted materials: aluminium and stainless-steel without ferromagnetic bottom, cupper, brass,

glass, ceramic, porcelain.

The manufacturers specify if their products are compatible induction.

To check if pans are compatibles :

· Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water must heat in a

few seconds.

· A magnet stucks on the bottom of the pan.

Certain pans can make noise when they are placed on an induction cooking zone. This noise doesn’t mean

any failure on the appliance and doesn’t inuence the cooking operating.

Pan dimension

The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.

However the bottom of this pan must have a minimum of diameter according to the corresponding cooking

zone.

To obtain the best eciency of your hob, please place the pan well in the centre of the cooking zone.

EN - 16

Examples of cooking power setting

(the values below are indicative)

1 to 2 Melting

Reheating

Sauces, butter, chocolate, gelatine

Dishes prepared beforehand

2 to 3 Simmering

Defrosting

Rice, pudding, sugar syrup

Dried vegetables, sh, frozen products

3 to 4 Steam Vegetables, sh, meat

4 to 5 Water Steamed potatoes, soups, pasta, fresh vegetables

6 to 7 Medium cooking

Simmering

Meat, lever, eggs, sausages

Goulash, roulade, tripe

7 to 8 Cooking Potatoes, fritters, wafers

9 Frying, roosting, boiling water Steaks, omelettes, fried dishes, water

PFrying, roosting

Boiling water

Scallops, steaks

Boiling signicant quantities of water

PART 6: MAINTENANCE AND CLEANING

Switch-o the appliance before cleaning.

Do not clean the hob if the glass is too hot because they are risk of burn.

· Remove small spots with a damp cloth using washing-up liquid diluted in a little water. Then rinse with

cold water and dry the surface thoroughly.

· Highly corrosive or abrasive detergents and cleaning equipment likely to cause scratches must be

avoided at all costs.

· Never use steam driven or high-pressure appliances.

· Do not use objects that might scratch the ceramic glass.

· Ensure that the pan is dry and clean and that there is no dust on your ceramic hob or on the pan. The use

of rough saucepans will scratch the surface.

· Spillages of sugar, jam, jelly, etc. must be removed immediately to prevent a damaged surface.

EN - 17

PART 7: WHAT TO DO IN CASE OF A PROBLEM

When the symbol [ E 4 ] appears:

· The table must be recongured. Please implement the following steps :

I) Important : before you start, make sure there is no more pot on the hob

II) Disconnect the appliance from the grid by removing the fuse or turning the circuit breaker o

III) Reconnect the table to the grid

IV) Procedure : take a pot with a ferromagnetic bottom and a minimum diameter of 16 cm

* start the procedure within 2 minutes after reconnecting the hob to the grid

* don’t use the [ O/I ] touch

V) First step : cancel the existing conguration

1) Press the touch n°2 and hold down

2) The symbol [ - ] will appear on each display

3) With your other hand, press successively and quickly

(less than 2s) on each [ - ] display.

Begin from the front right side and turn contrary

clockwise, as described on the picture (from a to d).

A double“beep”means an error occured. If so, start

again from item 1).

4) Remove your ngers from the touch control, then push again on touch 1 during few seconds,

until blinking [ E ] symbols appear.

5) Wait until [ E ] symbols stop blinking.

6) After few seconds, [ E ] are automatically transformed in [ C ]. The existing setup has been

cancelled.

Note: For induction hobs with 3 cooking zones, as the right front zone doesn’t exist in this case,

begin the procedure with the right rear zone (b).

VI) Second step : new setup

1) Take a ferromagnetical pot with a minimum diameter of 16 cm

2) Select a cooking zone by pushing on the corresponding [ C ] display

3) Place the pot on the area to be set

4) Wait until the [ C ] display becomes a [ - ]. The selected cooking zone is now congured.

5) Follow the same procedure for each cooking zone with a [ C ] display.

6) All the cooking zones are congured once all the displays are turned o.

Please use the same pot for the whole procedure.

Never put several pots together on the zones during the setup-process.

· If [ E 4 ] displaying remains, please call the customer care

The cooktop or the cooking zone doesn’t start-up:

· The cooktop is badly connected on the electrical network.

· The protection fuse cut-o

· The looking function is activated

· The sensitive keys are covered of grease or water.

· An object is put on a key.

c b

EN - 18

The control panel displays [ U ]:

· There is no pan on the cooking zone.

· The pan is not compatible with induction.

· The bottom diameter of the pan is too small.

The control panel displays [ C ] or [ E ]:

· Call the After-sales Service.

One or all cooking zones cut-o:

· The safety system functioned

· You forgot to cut-o the cooking zone for a long time.

· One or more sensitive keys are covered.

· The pan is empty and its bottom overheated.

· The hob also has an automatic reduction of power level and breaking Automatic overheating

Continuous ventilation after cutting-o the cooktop:

· This is not a failure, the fan continuous to protect the electronic device.

· The fan cooling stops automatically.

The automatic cooking system « stop and go » doesn’t start-up:

· The cooking zone is still hot [ H ]

· The highest power level is set [ 9 ]

The control panel displays [ L ]:

· Refer to the chapter control panel locking.

The control panel displays [ U ]:

· Refer to the chapter“Keep warm”.

The control panel displays [ ll ]:

· Refer to the chapter“Pause”.

The control panel displays [ ] or [ Er03 ]:

· An object or liquid covers the control keys. The symbol disappear as soon as the key is released or

cleaned.

The control panel displays [ E2 ]:

· The hob is overheated, let it cool and then turn it on again.

The control panel displays [ E3 ] ou [ E7 ]:

· The pan is not adapted, change the pan.

If one of the symbols above persists, call the SAV.

Table of contents

Languages:

Popular Hob manuals by other brands

ETNA

ETNA KIF470 Series Instructions for use

Caple

Caple C706G instruction manual

Siemens

Siemens ET6..FEP1 series user manual

Faber

Faber FBH 64 BK user manual

DeDietrich

DeDietrich DTG 701 Series Guide for installation and use

Zanussi

Zanussi ZGF 646 OPERATING AND INSTALLATION Manual

Baumatic

Baumatic BHI650 user manual

Bush

Bush LSBGHP instruction manual

Brandt

Brandt TI200 Operating and installation guide

CDA

CDA HNE8FR Installation, use and maintenance guide

Hoover

Hoover HVG6DC5B User instructions

Blomberg

Blomberg GEN 53415 E user manual

Zanussi

Zanussi ZGO62414 user manual

CDA

CDA hc7620 Manual for installation, use and maintenance

GUTMANN

GUTMANN 11T580I Instructions of use

Fagor

Fagor iF-ZONE90HBS Instruction book

AEG

AEG HG975550VB user manual

SCHOLTES

SCHOLTES tip 642 dd b operating instructions

Philco PHD 451B User manual

Popular Hob manuals by other brands