Philips 6000i Series User manual

1 2
Control buttons
Display panel
A
B
C
E
D
F
G
H
© 2019 Koninklijke Philips N.V.
All rights reserved.
4241 211 00583
AC6679
User Manual

3’
3’
3
7
15
19
5
13
9
17
6
14
10
18
4
12
8
16
222120
26
3’
3’
31
35
39
3’
32
36
23 24 25
34
38
11
30
27 29
28
33
37

1EN
Contents
1 Important 2
Safety 2
2 Your air purier 5
Product overview (g.a) 5
Controls overview (g.b) 5
3 Getting started 6
Installing the lters 6
Wi-Fi connection 6
4 Using the air purier 8
Understanding the air quality light 8
Turning on and o 9
Changing the Auto mode setting 9
Changing the fan speed 10
Using the light on/o function 10
Setting the child lock 10
5 Cleaning 11
Cleaning schedule 11
Cleaning the body of the air
purier 11
Cleaning the air outlet cover 11
Cleaning the air quality sensor 11
Cleaning the pre-lter 12
6 Replacing the lters 13
Filter replacement indicator 13
Replacing the lters 13
Filter force reset 14
Changing lter type 14
7 Storage 15
8 Troubleshooting 16
9 Guarantee and service 19
Order parts or accessories 19
10 Notices 19
Electromagnetic elds (EMF) 19
Recycling 20
Notice 20
Environmental friendly paper used. Thanks for your contribution to save trees.

2EN
1 Important
Safety
Read this user manual carefully before
you use the appliance, and save it for
future reference.
Danger
• Do not let water or any
other liquid or ammable
detergent enter the
appliance to avoid electric
shock and/or a re hazard.
• Do not clean the
appliance with water,
any other liquid, or a
(ammable) detergent to
avoid electric shock and/
or a re hazard.
• Do not spray any
ammable materials
such as insecticides or
fragrance around the
appliance.
Warning
• Check if the voltage
indicated on the
appliance corresponds to
the local power voltage
before you connect the
appliance.
• If the power cord is
damaged, you must have
it replaced by Philips, a
service center authorized
by Philips, or similarly
qualied persons in order
to avoid a hazard.
• Do not use the appliance
if the plug, the power cord,
or the appliance itself is
damaged.
• This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Child
shall not play with the
appliance. Cleaning and
maintenance shall not be
made by children without
supervision.
• Do not block the air inlet
and outlet, e.g. by placing
items on the air outlet or
in front of the air inlet.
• Make sure that foreign
objects do not fall into the
appliance through the air
outlet.

3EN
• Standard WiFi interface
based on 802.11b/g/n at
2.4 GHz with a maximum
output power of 31.62 mW
EIRP.
Caution
• This appliance is not
a substitute for proper
ventilation, regular
vacuum cleaning, or use
of an extractor hood or
fan while cooking.
• If the power socket used
to power the appliance
has poor connections,
the plug of the appliance
becomes hot. Make
sure that you plug the
appliance into a properly
connected power socket.
• Always place and use the
appliance on a dry, stable,
level, and horizontal
surface.
• Leave at least 20cm free
space behind and on both
sides of the appliance
and leave at least 30cm
free space above the
appliance.
• Do not place anything on
top of the appliance.
• Do not sit or stand on
the appliance. Sitting or
standing on the appliance
may lead to potential
injury.
• Do not place the
appliance directly below
an air conditioner to
prevent condensation
from dripping onto the
appliance.
• Make sure all lters
are properly installed
before you switch on the
appliance.
• Only use the original
Philips lters specially
intended for this
appliance. Do not use any
other lters.
• Combustion of the lter
may cause inreversible
human hazard and/or
jeopardize other lives. Do
not use the lter as fuel or
for similar purpose.
• Avoid knocking against
the appliance (the air inlet
and outlet in particular)
with hard objects.
• Always lift or move the
appliance by the handle
on back side of the
appliance.

4EN
• To prevent interference,
place the appliance at
least 2 meters away from
electrical appliances that
use airborne radio waves
such as TVs, radios, and
radio-controlled clocks.
• The appliance is only
intended for household
use under normal
operating conditions.
• Do not use the appliance
in wet surroundings or in
surroundings with high
ambient temperatures,
such as the bathroom,
toilet, or kitchen.
• The appliance does
not remove carbon
monoxide (CO) or radon
(Rn). It cannot be used
as a safety device in
case of accidents with
combustion processes
and hazardous chemicals.
• If you need to move the
appliance, disconnect the
appliance from the power
supply rst.
• Do not move the
appliance by pulling its
power cord.
• Always cleanse your
hands after changing the
lters.
• Do not insert your ngers
or objects into the air
outlet or the air inlet to
prevent physical injury
or malfunctioning of the
appliance.
• Do not use this appliance
when you have used
indoor smoke-type insect
repellents or in places
with oily residues, burning
incense, or chemical
fumes.
• Do not use the appliance
near gas appliances,
heating devices or
replaces.
• Always unplug the
appliance after use
and before cleaning,
or carrying out other
maintenance or replacing
the lters.
• Do not use the appliance
in a room with major
temperature changes,
as this may cause
condensation inside the
appliance.

5EN
Controls overview (g.b)
Control buttons
IPower on/o button
JLight on/o button
KAuto mode button
LFan speed button
MChild lock button
NReset button
Display panel:
PM2.5 display
Gas display
IAI display
Sleep mode
Pollution mode
Gas mode
Allergen mode
Pre-lter cleaning alert
Filter replacement alert
Speed 1
Speed 2
Speed 3
Turbo speed
2 Your air purifier
Congratulations on your purchase, and
welcome to Philips!
To fully benet from the support that
Philips oers, register your product at
www.philips.com/welcome.
Product overview (g.a)
AControl buttons
BAir outlet cover
CAir quality sensor
DDisplay panel
ENanoProtect lter HEPA Series 3
(FY6172)
FNanoProtect lter Active Carbon
(FY6171)
GPre-lter
HSide covers

6EN
3 Getting started
Installing the lters
Remove all packaging of the lters
before using the appliance.
Note
• Make sure the air purier is unplugged
from the electrical outlet before
installing the lters.
• There is one set of lters on each
side of the appliance. Each side is
equipped with one pre-lter and one
air purication lter.
• Make sure that you place the air
purication lter in the appliance rst
and then the pre-lter.
• Make sure that the side with the tag is
pointing towards you when installing
lters.
1 Pull the top part of the side panel
to remove it from the air purier
(g.c).
2 Press the two clips down (1) and
pull the pre-lter towards you (2)
(g.d).
3 Remove all lters (g.e).
4 Remove all packaging materials
from the lters (g.f).
5 Place the thick lter (FY6172) into
the air purier and then the thin
Active Carbon lter (FY6171). The
model numbers are shown on each
lter (g.g).
6 Attach the pre-lter back into the
air purier (g.h).
Note
• Make sure the side with the two clips
is pointing towards you, and that all
hooks of the pre-lter are properly
attached to the purier.
7 Reattach the front panel by pressing
the top part of the panel onto the
top of the air purier (1). Then, gently
push the panel against the body of
the air purier (2) (g.i).
8 Repeat the above steps and
assemble the lter for the other side
of the air purier.
9 Wash your hands thoroughly after
installing lters.
Wi-Fi connection
Setting up the Wi-Fi connection
for the rst time
1 Download and install the Philips
"Clean Home+" app from the
App Store or Google Play.
2 Put the plug of the air purier in the
power socket and touch to turn
on the air purier.
»The Wi-Fi indicator blinks
orange for the rst time.
3 Make sure that your smart device is
successfully connected to your Wi-
Fi network.

7EN
Reset the Wi-Fi connection
Note
• This applies when the default network
to which your purier is connected has
changed.
• Reset the Wi-Fi connection when your
default network has changed.
1 Put the plug of the air purier in the
power socket and touch to turn
on the air purier.
2 Touch and simultaneously for
3 seconds until you hear a beep.
»The air purier goes to pairing
mode.
»The Wi-Fi indicator blinks
orange.
3 Follow the steps 4-5 in "Setting up
the Wi-Fi connection for the rst
time" section.
4 Launch the "Clean Home+" app and
click on "Connect a New Device"
or press the "+" button on the top
of the screen. Follow the onscreen
instructions to connect the air
purier to your network.
5 After the successful pairing and
connection, the Wi-Fi indicator
will light up white. If pairing
is not successful, consult the
troubleshooting section, or the
help section in the "Clean Home+"
App for extensive and up-to-date
troubleshooting tips.
Note
• This instruction is only valid when
the air purier is being set up for the
rst time. If the network has changed
or the setup needs to be performed
again, consult section "Reset the Wi-Fi
connection"on page 7.
• If you want to connect more than
one air purier to your smartphone
or tablet, you have to do this one by
one. Complete the set up of one air
purier before you turn on the other air
purier.
• Make sure that the distance between
your smartphone or tablet and the air
purier is less than 10 m without any
obstructions.
• This App supports the latest versions
of Android and iOS. Please check
www.philips.com/cleanhome for the
latest update of supported operating
systems and devices.

8EN
4 Using the air
purifier
Understanding the air
quality light
Air quality light color Air quality level
Blue Good
Blue-Purple Fair
Purple-Red Poor
Red Very poor
The air quality light automatically goes
on when the air purier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.
The color of the air quality light is
determined by the highest level among
PM2.5, IAI and Gas readings.
PM2.5
AeraSense sensing technology
accurately detects and quickly responds
to even the slightest particle change in
the air. It provides you with reassurance
with real-time PM2.5 feedback.
Most of the indoor air pollutants fall
under PM2.5 – which refers to airborne
particle pollutants smaller than
2.5 micrometers. Common indoor
sources of ne particles are tobacco
smoke, cooking, burning candles. Some
airborne bacteria and the smallest
mold spores, pet allergen and dust mite
allergen particles also fall under PM2.5.
PM2.5 level Air quality light
color
≤35 Blue
36-75 Blue-purple
76-115 Purple-red
>115 Red
IAI
The professional-grade AeraSense
sensor detects the level of indoor air
allergen and with numerical feedback
from 1 to 12 the potential risk level of
indoor air allergens can be displayed. 1
indicates best air quality.
IAI level Air quality light
color
1-3 Blue
4-6 Blue-purple
7-9 Purple-red
10-12 Red
Gas
With an advanced gas sensor, a display
ranging from L1 to L4 shows the level
change of potential harmful gases (incl.
VOC, odor, etc.) detected. L1 indicates
best air quality.
Gas level Air quality light
color
L1 Blue
L2 Blue-purple
L3 Purple-red
L4 Red