Philips AC2958 User manual
AC2958
AC2959
© 2020 Koninklijke Philips N.V.
All rights reserved.
3000 048 96021
EN User manual 1
BG Ръководство за потребителя 11
CS Příručka pro uživatele 22
HU Felhasználói kézikönyv 32
KK Қолданушының нұсқасы 43
MK Упатство за користење 53
PL Instrukcja obsługi 65
RO Manual de utilizare 76
RU Руководство пользователя 87
SK Príručka užívateľa 99
SQ Manuali i përdorimit 110
UK Посібник користувача 121
1 2
A
B
C
D
E
3’’
3
11
7
15
5
13
9
17
6
14
10
18
4
12
8
16
19 21 22
20
3’’
+
3’’
3’’
23
27
31
25
29
26
30
24
28
1EN
English
Contents
1 Your air purier ...................................................................2
Product overview (Fig a) .........................................................................2
Controls overview (Fig b) ........................................................................2
2 Getting started ...................................................................3
Installing the lter ...........................................................................................3
Wi-Fi indicator ..................................................................................................3
Wi-Fi connection ............................................................................................3
3 Using the air purier .........................................................4
Air quality light .................................................................................................4
Turning On and O ........................................................................................4
Changing the mode setting .....................................................................5
Switching the display indicator ..............................................................5
Using the light on/o function ...............................................................5
Checking the lter status ...........................................................................5
4 Cleaning and maintenance ............................................6
Cleaning the body of the air purier ...................................................6
Cleaning the particle sensor ....................................................................6
Cleaning the surface of the lter ...........................................................6
Replacing the lter ........................................................................................ 7
Filter reset ........................................................................................................... 7
5 Storage ................................................................................... 7
6 Troubleshooting .................................................................8
2EN
1 Your air purifier
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register your product at
www.philips.com/welcome.
Product overview (Fig a)
AControl panel
BAir outlet
CParticle sensor
DNanoProtect lter Series 3 (FY2180/30)
EBack cover
Controls overview (Fig b)
Filter cleaning alert Power on/o button
Filter replacement alert
Mode switch button
Filter status/reset button
Light on/o button
Display switch button
Mode display: Auto (
), Turbo
(
), Gentle (
), Sleep (
)
3EN
English
2 Getting started
Installing the lter
Note: Make sure the air purier is unplugged from the electrical outlet before installing the lter.
1 Pull the back cover and remove it from the appliance (g c).
2 Pull the lter from the appliance (g d).
3 Remove all packaging materials of the air purication lter (g e).
4 Put the lter back into the appliance (g f).
5 Reattach the back cover (g g).
Wi-Fi indicator
Wi-Fi icon status Wi-Fi connection status
Blink in orange Connecting to the smartphone
Blink in white Connecting to the router
Stable in white Connected to the router
O Wi-Fi function disabled
Wi-Fi connection
First timeconnection
1 Download and install the Philips "Clean Home+" app from the
App Store or Google Play.
2 Connect your smartphone or tablet to your Wi-Fi network.
3 Launch the "Clean Home+" app and click on "Connect a New
Device" or press the "+" button on the top of the screen. Follow
the onscreen instructions to connect the air purier to your network.
Reset the Wi-Fi connection
1 Touch and for 3 seconds until you hear a beep.
»The Wi-Fi indicator blinks orange.
2 Follow the steps 3 in "First time connection" section.
Note: Please check www.philips.com/cleanhome for the latest update of supported Operation
System and devices.
4EN
3 Using the air purifier
Air quality light
After approximately 30 seconds, the particle sensor selects the color that
corresponds to the surrounding air quality of airborne particles.
Note: The color of the air quality light is determined by the highest risk index among PM2.5 and
IAI readings.
PM2.5 refers to airborne particle pollutants smaller than 2.5 micrometers.
PM2.5 level Air quality light color Air quality level
≤12 Blue Good
13-35 Blue-purple Fair
36-55 Purple-red Poor
>55 Red Very poor
IAI refers to the level of indoor air allergen.
IAI level Air quality light color Air quality level
1-3 Blue Good
4-6 Blue-purple Fair
7-9 Purple-red Poor
10-12 Red Very poor
Turning On and O
Note:
• Put the plug of the air purier in the power socket.
• If the purier stays connected to the electrical outlet after turning OFF, the air purier will
operate under the previous settings when turned ON again.
1 Touch to switch on the air purier (g h).
2 The " " displays on the screen during warming up. Then the air purier
shows the PM2.5/IAI level after measuring the air quality (g i).
3 The air purier operates in the auto mode with PM2.5 displayed on the
screen (g j).
4 Touch and hold the button for 3 seconds to switch o the air purier
(g k).
5EN
English
Changing the mode setting
You can choose Auto mode, Turbo mode, Gentle mode or the Sleep mode by
touching the button.
1 Auto mode ( ): The air purier automatically adjust the fan speed in
accordance with the ambient air quality (g l).
2 Turbo mode ( ): The air purier operates on the highest speed (g m).
3 Gentle mode ( ): The air purier operates at a low speed (g n).
4 Sleep mode ( ): The air purier operates quietly at a low speed. After
3 seconds, the screen lights o (g o).
Switching the display indicator
Note:
• The appliance display PM2.5 level by default (g p& (g q)).
Using the light on/o function
You can touch the light on/o button manually to turn o all lights and the
control panel. Touch any button to wake up all lights (g r & (g s)).
With the light sensor:
• The control panel can automatically turn on, turn o or dim according to
the ambient light.
• The control panel will be o or dim when the ambient light is dark.
You can touch any button to wake up all lights. If no further operation, all
lights will be o or dim again to match with the ambient light.
Checking the lter status
• Touch the lter status check/reset button to check the lter service life
status (g t).
Icon color Display (%)
Blue 16-100
Blue-purple 9-15
Purple-red 4-8
Red 0-3
Note: The appliance goes back to normal display if no operations after 3 seconds.
6EN
4 Cleaning and maintenance
Note:
• Do not attempt to clean the particle sensor with a vacuum cleaner.
• Switch o the air purier and unplug from the power socket before following action.
Cleaning the body of the air purier
Use a soft, dry cloth to clean both the interior and exterior of the air purier
and the air outlet (g u).
Cleaning the particle sensor
Clean the particle sensor every 2 months for optimal functioning of the
appliance.
1 Clean the particle sensor inlet and outlet with a soft brush (g v).
2 Clean the particle sensor with a damp cotton swab. Dry all parts
thoroughly with a dry cotton swab (g w).
Cleaning the surface of the lter
Clean the surface of lter with vacuum cleaner when the lter cleaning alert
display on the screen (g x).
1 Pull the back cover and remove it from the appliance (g c).
2 Pull the lter from the appliance (g d).
3 Clean the surface of the lter with a vacuum cleaner (g y).
4 Put the lter back into the appliance (g f).
5 Reattach the back cover (g g).
6 Touch the button to switch on the appliance (g h).
7 Touch and hold the lter status check/reset button for 3 seconds to
reset the lter cleaning time (g z).
8 Wash your hands thoroughly after cleaning the lter (g {).
7EN
English
Replacing the lter
Note:
• The lter is not washable or reusable.
• Do not smell the lter as it has collected pollutants from the air.
When the lter need to be replaced, the lter replacement alert lights up
red (g |).
1 Replace the lter with Philips NanoProtect lter Series 3 (FY2180/30) ,
Please follow the step of Chapter "Installing the lter".
2 Touch the button to switch on the appliance (g h).
3 Touch and hold the lter status check/reset button for 3 seconds to
reset the lter cleaning time (g }).
4 Wash your hands thoroughly after cleaning the lter (g {).
Filter reset
You can also replace the lter before lter replacement alert ( ) displays on
the screen. After replacing a lter, you need to reset the lter lifetime counter
manually.
1 Touch the power button for 3 seconds to turn o the appliance and
unplug from power socket (g h).
2 Put the power plug in the power socket (g ~).
3 Within 15 seconds after power on, touch and hold and button for
3 seconds to reset the lter lifetime counter (g ).
5 Storage
1 Turn o the air purier and unplug from the power socket.
2 Clean the air purier, particle sensor and the surface of the lter (see
chapter "Cleaning and maintenance").
3 Let all parts air dry thoroughly before storing.
4 Wrap the lter in air tight plastic bags.
5 Store the air purier, lter in a cool, dry location.
6 Always thoroughly wash hands after handling lters.
8EN
6 Troubleshooting
This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the information
below, contact the Consumer Care Center in your country.
Problem Possible solution
The appliance
does not work
properly.
• Check if the back cover is properly installed.
• The lter replacement alert has been on continuously
but you have not replaced the corresponding lter. As a
result, the appliance is now locked. In this case, replace
the lter and long press to reset the lter lifetime
counter.
The airow that
comes out of
the air outlet
is signicantly
weaker than
before.
• The surface of the lter is dirty. Clean the surface of the
lter (see the chapter "Cleaning and maintenance").
The air quality
does not improve,
even though the
appliance has
been operating
for a long time.
• Check if the packing material is removed from the lter.
• The lter has not been placed in the appliance. Make
sure that the lter (FY2180/30) is properly installed.
• The particle sensor is wet. The humidity level in your
room is high and causes condensation. Make sure that
the particle sensor is clean and dry (see the chapter
"Cleaning and maintenance").
• Room size is large or the outdoor air quality is poor.
For optimum purication performance, please close the
doors and windows when operating the air purier.
• There are indoor pollution resources. For instances,
smoking, cooking, incense, perfume or alchohol.
• Filter reaches the end of life. Replace the lter with a
new one.
The color of the
air quality light
always stays the
same.
• The particle sensor is dirty. Clean the particle sensor
(see the chapter "Cleaning and maintenance").
9EN
English
Problem Possible solution
The appliance
produces a
strange smell.
• The rst few times you use the appliance, it may
produce a plastic smell. This is normal. However, if the
appliance produces a burnt smell even if removing
lters, contact your Philips dealer or an authorized
Philips service center. The lter may produce smell after
being used for a while because of the absorption of
indoor gases. It’s recommended that you reactivate the
lter by putting it in direct sunlight for repeated use. If
odor still exists, replace the lter.
The appliance is
extra loud.
• It's normal if the appliance runs at the Turbo mode.
• In the Auto mode, if the appliance is too loud, maybe
the appliance runs at high speed because air quality
becomes worse, or your personalized setting in App
triggers a higher fan speed. You can choose the Sleep
mode, or change the settings in the App.
• If anything drops into air outlet, it may also cause
abnormal loud sound. Immediate turn o appliance,
turn appliance upside down, to get foreign objectives
out of appliance.
• If there is abnormal sound, contact the Consumer Care
Center in your country.
The appliance still
indicates that I
need to replace a
lter, but I already
did.
• Perhaps you did not reset the lter lifetime counter.
Switch on the appliance. Then touch and hold the reset
button ( ) for 3 seconds.
Error code "E1"
displays on the
screen.
• The motor has malfunctions. Contact the Consumer
Care Center in your country.
10 EN
Problem Possible solution
The Wi-Fi setup is
not successful.
If the router your purier is connected to is dual –
band and currently it is not connecting to a 2.4GHz
network, please switch to another band of the same
router (2.4GHz) and try to pair your purier again. 5GHz
networks are not supported. 5GHz networks are not
supported. If your purier is connected to a dual – band
router, please switch to the 2.4GHz network of the
router and try to pair your purier again.
• Web authentication networks are not supported.
Public Wi-Fi such as oce or hotel networks are not
supported.
• Check if the purier is within range of the Wi-Fi router.
You can try to locate the air purier closer to the Wi-Fi
router.
• Check if the Wi-Fi password is correct. The password is
case-sensitive.
• Retry the setup with the instructions in section "Set up
the Wi-Fi connection when the network has changed".
Retry the setup with the instructions in section "Reset
Wi-Fi Connection".
• Keep the appliance away from other electronic devices
that may cause interferences.
• Check if the mobile device is in airplane mode. Make
sure to have the airplane mode deactivated when
connecting to the Wi-Fi network.
• If the Wi-Fi pairing fails after trying several times,
please turn of the cellular data on your smartphone in
the Settings section and start the pairing again.
• If the Wi-Fi icon on your purier’s display is in stable
white but without seeing the purier in your app, click
on "Connect a New Device'' and add the purier from
the local list on ''Begin setup'' page.
• Consult the help section in the App for extensive and
up-to-date troubleshooting tips.
11BG
Български
1 ...................... 12
( a) ........................................... 12
( b) ............. 12
2 ..................................................................... 12
..................................................................... 12
Wi-Fi ........................................................................................ 13
Wi-Fi ................................................................................................... 13
3 ......... 14
..............................................14
.....................................................................14
............................................... 15
.......................... 15
./.
.................................................................................................. 15
............................................16
4 ........................................16
.................................................................................................................16
.......................................16
.....................16
....................................................................................17
...............................................................................17
5 ...................................................................... 18
6 ..................... 18
12 BG
1
Philips!
Philips ,
www.philips.com/welcome.
( a)
A
B
C
D NanoProtect 3 (FY2180/30)
E
( b)
./.
/
:
(
), (
),
(
), (
)
2
: , ,
.
1 ( c).
2 ( d).
3
( e).
13BG
Български
4 ( f).
5 ( g).
Wi-Fi
Wi-Fi Wi-Fi
. Wi-Fi
Wi-Fi
1 "Clean Home+"
Philips App Store Google Play.
2 Wi-Fi
.
3 "Clean Home+"
" " "+"
. ,
.
Wi-Fi
1 3 , .
»Wi-Fi .
2 3 " ".
: , www.philips.com/cleanhome
.
14 BG
3
30 ,
.
: -
PM2.5 IAI.
PM2.5 ,
- 2,5 .
PM 2,5
≤12
13 – 35 -
36 – 55 -
> 55
IAI .
IAI
1-3
4-6 -
7-9 -
10-12
:
• .
• ,
,
.
1 , ( h).
15BG
Български
2 " " .
PM2.5/IAI
( i).
3 PM2.5,
( j).
4 3 ,
( k).
, ,
, .
1 ( ):
( l).
2 ( ): -
( m).
3 ( ):
( n).
4 ( ):
. 3 ( o).
:
• PM2.5 ( p ( q).
./.
./. ,
.
, ( r ( s).
:
• ,
.
• ,
.
, .
- ,
, .
16 BG
• /
,
( t).
(%)
16 – 100
- 9 – 15
- 4 – 8
0 – 3
: 3 ,
.
4
:
• .
•
.
, ( u).
2
.
1 ( v).
2 .
( w).
,
( x).
1 ( c).
17BG
Български
2 ( d).
3 ( y).
4 ( f).
5 ( g).
6 , ( h).
7 /
3 ,
( z).
8
( {).
:
• .
• , .
,
( |).
1 NanoProtect 3 Philips (FY2180/30),
, " ".
2 , ( h).
3 /
3 ,
( }).
4
( {).
( ) .
.
1 3 ,
, ( h).
2 ( ~).
3 15
3 ,
( ).
18 BG
5
1 .
2 ,
( " ").
3 .
4 .
5
.
6 .
6
- ,
.
-,
.
.
•
.
•
,
.
.
,
.
,
,
-
.
• .
( "
").
Other manuals for AC2958
1
This manual suits for next models
1
Table of contents
Languages:
Other Philips Air Cleaner manuals
Philips
Philips AC1213/40 User manual
Philips
Philips GoPure GP5211 User manual
Philips
Philips AC4001 User manual
Philips
Philips AC4091 User manual
Philips
Philips AC3259/30 User manual
Philips
Philips HU481610 User manual
Philips
Philips AC2889/10 User manual
Philips
Philips AC4600 User manual
Philips
Philips AC1758 User manual
Philips
Philips HR 4340/A User manual
Philips
Philips 1000i Series User manual
Philips
Philips Aetaire AIR160 Classic User manual
Philips
Philips 4222.002.7127.1 User manual
Philips
Philips AC1217/20 User manual
Philips
Philips AC6606 User manual
Philips
Philips AC3036 User manual
Philips
Philips aetaire Polo Dent User manual
Philips
Philips AC4372 User manual
Philips
Philips AC3833 User manual
Philips
Philips AC1215/10 User manual
