Philips GoPure GP5301 User manual

页面尺寸：160mm x 66mm
EN
简体中文
3
11
User Manual
EN Read these instructions for use carefully
before using the product and save them for
future reference.
简体中文 使用前请仔细阅读使用说明，
保留说明书以便日后查阅。
GoPure
Car air purier
GP5301
飞利浦汽车生活
官方微信公众号

EN
3
Warranty and service
The Lumileds warranty applies, provided:
• The product is handled properly for its intended
use only.
• The product is used in accordance with its
operating instructions.
• You present the original invoice with the product.
The Lumileds warranty does not apply if the product
is damaged due to accident, error, or misuse.
For more information and assistance, or if you have
a problem with the product, you can visit the Philips
website at www.philips.com/automotive, or contact
the retail outlet where you purchased the product.
Or for the users in China, please call the customer
service hotline: [phone]
Lumileds (Shanghai) Management Co., Ltd
No. 19-20, Lane 299,
Wenshui Road, JiangAn District, Shanghai
English
Before you start
Thank you for buying Philips GoPure Car air purier.
Before you install GoPure in your car, take time to
read this guide.
The GoPure Car air purier will help you protect
your health by improving the quality of the
air you breathe in your car. It is known that air
pollution levels inside cars are often much higher
than outside.
The GoPure Car air purier removes harmful gases
and ne particles such as microorganisms. It also
reduces bad odors to make the time in your car
more pleasant and healthier.

4
1 m Important information
m Warning
Philips GoPure car air
purier is not a toy!
Do not let children
play with it.
m Warning
Keep Philips GoPure car
air purier free of any
object. Do not cover!
m Warning
For your safety, do not
manipulate the device
while driving.
Always stop your
car rst!
c Danger
Do not clean or spill
any liquids such as
water, detergents, or
ammable solvents on
the device.
m Important
To clean the GoPure car
air purier:
• Disconnect GoPure
car air purier
• Use soft cloth only.
m Important
Help to preserve the
environment. Do not
discard the device with
household waste. Bring
it to the ocial waste
recycling service near
by you. Filters may
be disposed of with
household waste.
m Warning
Philips GoPure car
air purier device
contains high-precision
technology.
Handle with care.
Do not drop or tamper!
Cautions:
• this appliance can
be used by children
aged from 8 years and
above and persons
with reduced physical,
sensory or mental
capabilities or lack
of experience and
knowledge if they have
been given supervision
or instruction concerning
use of the appliance
in a safe way and
understand the hazards
involved
• children shall not play
with the appliance
• cleaning and user
maintenance shall not
be made by children
without supervision
• the appliance is only
to be used with the
detachable power
supply provided
• must only be supplied
at SELV
Environment

EN
キҀ󰩕
3
10
User Manual
EN Read these instructions for use carefully
before using the product and save them for
future reference.
キҀ󰩕Ҭ⩕ݺ䄤Ё㏳䬲䄨Ҭ⩕䄡ᬻ喑
Ԋ⪆䄡ᬻΓВӬᬒᴒ䬲ȡ
GoPure
Car air purier
GP5301
下ݖ⊓↪䒓⩌≨
Ⴥ󰪇ᓛԎڙф
User
Manual
EN
5
2 Discover Gopure car air purier
2.1 Discover the content of Philips GoPure car
air purier package
m Warning
Make sure the device is
installed according to
the instructions
in this guide.
For your safety, use only
the items delivered in
this package to install
the device. In case of
incorrect installation,
Lumileds declines all
responsability for
any harm or accident.
Mounting belt
USB-C
power cable
High eciency
lter (Remove
plastic bag
before use)
Air quality
indicator/
Filter alert
USB-C
port
Air quality
detector
On/O/
Mode
control
Silent mode
Boost mode
Auto mode
Air outlet
Air inlet

6
3 How to install Philips GoPure
car air purier in your car
Notice:
1 The mounting belt
may not be suitable to
the armrest of all car
models.
2 Please don’t put device
on car dashboard or
airbag.
m Warning
For your safety, only use
the equipment delivered
in your package. Never
use other equipment,
such as tape, cord,
or others.
3.1 Installation-using the
headrest or armrest
1 Take o top cover and
remove the lter’s plastic
wrapping.
2 Place the mounting
belt over the device as
shown, with the furry
surface facing the device.
3 You may install Philips
GoPure car air purier on
headrest or armrest of
your car.

EN
7
3.2 Connection and operation
1 Connect the USB-C
power cable to the
device as shown.
2 Connect the power cable
to a USB outlet in your
car. (To ensure optimal
performance, the device
power input needs to be
higher than 5V/1A.)
m Warning
For your safety, do
not try to switch o
or operate the device
manually while driving.
Always park your
car rst!
In-car USB DATA port
is not recommended as
power input.
mImportant
When using Philips
GoPure car air purier
• Keep your car ventilation
in low speed .
• Keep car windows closed.
4 Using GoPure car air purier functions
When the vehicle power supply is on, the device starts
automatically in auto mode.
1 To turn on the device, touch the
power button, the device will start
running in auto mode.
2 Touch the power button to switch
the speed mode in sequence of
auto, boost and silent.
3 To turn o the device, touch and
hold the power button for
2 seconds.
Understanding GoPure healthy-air indicator
The healthy-air indicator shows the air quality inside
your car at all times.
Yellow
76-150 ug/m3
0-75 ug/m3
>150 ug/m3
Moderate pollution
Blue
Excellent
Replace lter
Red
Severe pollution
After the device is turned
on, the AQI will alert in
yellow blinking light.
0
2s

8
m Important
You must reset the
Philips GoPure device
after every lter
replacement.
1. Plug the device into the
power supply and turn
o the device.
2. Touch and hold power
button for 5 seconds
until you hear a beep
sound. The device
will be turned into
lter reset process.
Wait for another 5
seconds until the AQI
color changes to blue,
indicates lter reset
successful.
3. Repeat the above steps
if the lter rest fails .
5.2 How to reset GoPure car
air purier after
a lter replacement
5 Filter replacement and reset
Philips GoPure Car air
purier is composed of
a multi-layer ltration
system that guarantees
the most eective air-
purication. All lter layers
are assembled in one single
simple-to-replace lter.
mImportant
Philips GoPure car
air purier indicates
automatically when you
must change the lters.
5.1 How to replace the lter
1 Disconnect GoPure car
air purier device.
2 Lifting up the rear side of
top cover and remove it.
When the lter needs
to be replaced, the AQI
indicator will alert in
yellow blinking light.
Replace the lter immediately
using only genuine Philips
GoPure lter.
It helps maintain the
maximal performance of
your Car air purier and
helps to provide the purest
air quality inside your car.
3 Remove the old lter
as shown.
4 Using the groove,
insert a new original
GoPure lter.
m Important
The lter slides in only
one way, do not force it
in. See above.

EN
9
5.2 How to reset GoPure car
air purier after
a lter replacement
3 Remove the old lter
as shown.
6 Philips GoPure car air purier
troubleshooting
Problem 1
Philips GoPure car air
purifier does not switch to
boost speed.
Solution 1
• Check it is not
connected to in-car USB
data port which is usually
not designed as
power source.
• Connect to in-car
USB port with charging
function.
• Or check your USB
power input, it needs to
be higher than 5V/1A.
Problem 2
When the AQI turns to
yellow or red color, my
GoPure Car air purifier
keeps rebooting.
Solution 2
• Verify that the USB port
is not DATA port, connect
only to USB port with
charging function (or
current over 1A).
• Check the power
connection and make
sure the USB cable is
properly inserted.
• If your device still
does not restart, please
contact your retailer.
Problem 3
Some cars continue to
power the 5V outlet when
the engine is o.
Solution 3
To avoid draining the
battery, Philips GoPure car
air purier will automatically
power o after two hours of
continuous running.
To restart your device,
press the power button.
Problem 4
After filter
replacement,Philips
GoPure filter AQI indicator
remains yellow blinking
light at restart.
Solution 4
Turn o the device and
follow lter reset steps in
section 5.2. Pls make sure
the power cable remains
connected during the
whole process.
• Repeat the reset steps
section 5.2.
Problem 5
The Philips GoPure motor
stops running for a short
while.
Solution 5
This is normal: the device
has a voltage protection.
At times, the voltage
supply from vehicle may
vary and uctuant, in
these cases, the device
will turn o automatically.
Touch the power button
to restart the device.
Problem 6
Philips GoPure air quality
indicatorr does not
change for a very long
time.
Solution 6
It may simply indicate
stable air quality.
It may also indicate that
the air intake slots are
obstructed or polluted.
• Make sure the air
circulation around the
device is free.
• Restart the device.If the
problem remains, please
contact your retailer or
service center.

10
Problem 7
Philips GoPure air quality
indicator changes frequently.
Solution 7
This is normal and
the device is working
properly. When the
air quality is poor,
the device performs
its cleaning process.
However, the air quality
indicator reects the air
quality near the device.
At times, this may bring
a frequent air quality
display change. Let the
GoPure car air purier
perform its cleaning
process. When the air
reaches good quality, the
air quality indicatorr will
turn blue as described.
Problem 8
Philips GoPure air quality
indicator shows a blue light,
but some odor remains in
the car.
Solution 8
Philips GoPure air quality
indicatorr only reects
dust-related pollution
in the air. It does not
indicate chemical
pollution. However,
Philips GoPure car air
purier still removes dust
and chemical pollutants
while running.
• Let the device perform its
cleaning process and the
air quality will
improve rapidly.
Problem 9
Philips GoPure car air
purifier has been running
for a long time, yet my
new car continues to
produce unpleasant odor.
Solution 9
Some unpleasant odor
in new cars may come
out continuously from a
variety of sources.
GoPure car air purier
device continues to
purify the air. However,
some odors may be
produced continuously.
GoPure car air purier
reduces the air pollutants
considerably.
• To speed up the air
cleaning process in a
new car, you may run
GoPure car air purier in
Boost mode (section 4 in
page 7).