Philips Cucina HR1757 User manual

HR1757, HR1754

2

ENGLISH 4
POLSKI 14
ROMÂNĂ 24
РУССКИЙ 34
ČEŠTINA 45
MAGYAR 55
SLOVAK 65
УКРАЇНСЬКА 75
HRVATSKI 85
EESTI 95
LATVIEŠU 105
LIETUVIŠKAI 115
SLOVENŠČINA 125
БЪЛГАРСКИ 135
SRPSKI 146
156
HR1757, HR1754

Safety notice
Always unplug the appliance from the mains before assembling,
disassembling or making adjustments to any of the accessories.
Keep the appliance out of the reach of children.
The motor only starts if the blender jar or the mill attachment
(HR1757 only) has been correctly assembled onto the motor unit.
HR1757 only: Make sure the blade unit is securely fastened onto the
mill beaker before you screw the mill attachment onto the motor unit.
Avoid touching the cutting edges of the blade units when cleaning
them.They are very sharp and you could easily cut your fingers on
them.
To avoid spillage, especially when you are processing hot ingredients,
make sure that the lid is closed and the stopper is fastened properly.
Always switch the appliance on or off by pressing the off button
(O-button). Never try to switch the appliance off by turning the
blender jar or the beaker of the mill (HR1757 only).
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗Check if the voltage indicated on the appliance corresponds to
the local mains voltage before you connect the appliance.
◗Do not use the appliance if the mains cord, the plug or other
parts are damaged.
◗If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
◗Always unplug the appliance from the mains before assembling or
disassembling accessories or cleaning the appliance
◗Never immerse the motor unit in water or any other liquid, nor
rinse it under the tap. Use only a moist cloth to clean the motor
unit.
◗Unplug the appliance immediately after use.
◗Keep the appliance out of the reach of children.
◗Never let the appliance run unattended.
◗Do not exceed the maximum quantities and processing times
indicated in the table.
◗Let hot ingredients cool down before pouring them into the
blender jar (max. temperature 80cC/175cF).
◗To prevent spillage, do not fill the jar beyond the maximum level
indication (i.e. 1.5 litres).When you are blending a hot liquid, do
not put more than 1.1 litres in the jar.
ENGLISH4

When you are blending a foaming liquid, do not fill the jar beyond
the 1.2-litre indication.
◗The motor only starts if the blender jar or the mill attachment
(HR1757 only) has been correctly assembled onto the motor
unit.
◗HR1757 only: Make sure the blade unit is securely fastened onto
the mill beaker before you screw the mill attachment onto the
motor unit.
◗Never reach into the jar with your fingers or an object while the
appliance is running.
◗If the blades get stuck, unplug the appliance before removing the
ingredients that are blocking the blades.
◗Never use the accessories to switch the appliance on and off!
◗Never use any accessories or parts from other manufacturers or
that have not been specifically advised by Philips.Your guarantee
will become invalid if such accessories or parts have been used.
◗Noise level: Lc = 86 dB(A)
Before first use
Thoroughly clean the parts that come into contact with food before
you use the appliance for the first time (see chapter 'Cleaning').
Preparing for use
C◗Wind excess mains cord round the base of the appliance.
Using the appliance
Blender
The blender is intended for:
- Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed
drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.
C1Mount the jar onto the motor unit. Fasten it by turning it in the
direction of the arrow.
The jar is properly fixed when the notch in its lower rim is in line with
the indications on the buttons on the motor unit.
ENGLISH 5
1
2

Do not exert too much pressure on the handle of the jar.
2Open the lid by pressing the projection on the handle with
your thumb.
3Put the ingredients in the jar.
Never fill the jar beyond the maximum level indication (1.5 litres),
particularly not if you are blending hot liquids (maximum 1.1 litres).
When you are blending foaming liquids, do not fill the jar beyond the
1.2-litre indication.
4Close the lid.
C5Insert the stopper into the opening in the lid.
To avoid spillage, always insert the stopper into the opening in the lid
before you start processing.
6Put the mains plug in the wall socket.
C7Press the appropriate speed button to switch the appliance on.
The speed buttons allow you to choose the right speed to obtain
optimal results. See the table for the recommended speeds.
C◗Press the pulse button (M-button) a few times to let the appliance
run for only a few seconds at a time.The appliance will stop when
you release the button. Press the pulse button as often as is
necessary.
Always switch the appliance off before you open the lid.
8Switch the appliance off by pressing the O-button.
Never switch the appliance on or off by turning the jar.
Recipes can be found in the 'Recipes' chapter below.
Tips
To avoid spillage, never fill the jar above the maximum level indication
(1.5 litres), particularly not if you are blending hot liquids (maximum
1.1 litres).
ENGLISH6
Speed
speed 1
speed 2
speed 3
Ingredients
liquid ingredients (e.g. chocolate milk, milk with fruit, mayonnaise)
heavier ingredients e.g. a combination of liquid and solid ingredients
(e.g. tomato sauce or pate)
heavy, mainly solid ingredients (e.g. ice cubes, soups, beans, etc.)

◗If you are blending foaming liquids, never fill the jar beyond the
1.2 l indication.
◗Liquid ingredients (e.g. oil) can be poured into the blender jar
through the opening in the lid while the appliance is running.
Do not let the blender run for more than 3 minutes at a time. If you
have not finished blending after 3 minutes, switch the appliance off for
one minute before you continue blending.
◗Dry ingredients must not be processed for more than 1 minute.
◗Cut solid ingredients into smaller pieces before putting them in
the blender jar. Do not process a large quantity of solid
ingredients at the same time. Process these ingredients in a series
of small batches instead.
◗If you are not satisfied with the result when blending solid
ingredients, switch the blender off and press the pulse button
(M-button) a few times to let the blender run briefly.You can also
stir the ingredients with a spatula (not while the blender is
running!) or pour out some of the contents of the jar and process
smaller amounts.
◗To crush ice cubes, drop them through the opening in the lid onto
the rotating blades.
◗To make tomato juice, cut the tomatoes in four and drop the
pieces through the opening in the lid onto the rotating blades.
Never reach into the jar with your fingers or an object (e.g. a spatula
while the blender is running.
◗If you are processing solid and liquid ingredients at the same time,
pour the liquid ingredients in the jar before switching the
appliance on.Add the solid ingredients while the appliance is
running.
Filter
You can use the filter accessory to obtain extra finely blended sauces,
fresh fruit juices or cocktails. All pips and skins will be caught in the
filter.
1Make sure the appliance is unplugged. remove the blender jar
from the appliance and out the filter in the blaender jar.
Make sure the filter is properly fitted onto the bottom of the jar.The
grooves of the filter and the ribs inside the blender jar will help you put
the filter in the right position.
C2Put the lid on the jar to fix the filter in its proper position.
ENGLISH 7

3Put the blender jar back on the motor unit and insert the plug
into the wall socket.
C4Put the ingredients in the filter through the opening in the lid.
Never fill the filter beyond its metal part. Do not use the filter to
process hot ingredients.
5Add water or another liquid.
C6Insert the stopper into the opening in the lid and press the
button for the highest speed to switch the appliance on. Let
the appliance run for max. 40 seconds.
C7Switch the appliance off. Pour out the drink through the
pouring lip of the blender jar.
8For optimal results, put the jar with the remaining ingredients
back onto the appliance and let it run for a few more seconds.
9Pour out the rest of the drink.
Tips
◗Particularly when you are processing large quantities, we advise
you not to put all the ingredients in the filter at the same time.
Start processing a small quantity, let the appliance run for a
moment, switch it off and then add another small quantity. Repeat
this procedure until you have processed all the ingredients.
◗For making soy milk:
Soak soy beans for 4 hours before processing them.You can process
max. 50 g of dry soy beans with max. 500 ml water at a time.
◗For making fruit juices and cocktails:
For the best results, add approx. 300 ml water (or another liquid if you
are making e.g. cocktails, etc.) to 150 g fruit.
ENGLISH8

Mill (only type HR1757)
The mill attachment can be used for grinding and chopping ingredients
such as peppercorns, sesame seeds, rice, wheat, coconut flesh, nuts
(shelled), coffee beans, soy beans, dried peas, cheese, breadcrumbs, etc.
Always process cloves, star anise and aniseed together with other
ingredients. If processed separately, these ingredients may attack the
plastic materials of the appliance.
The mill is not suitable for chopping very hard ingredients like nutmeg
and ice cubes.
C1Put the ingredients in the beaker.
Process only dry ingredients. Do not fill the beaker beyond the 'MAX'
indication. See the table for the advised quantities.
C2Make sure the rubber ring on the blade unit is properly placed.
C3Screw the blade unit onto the beaker.
If this requires some effort, moisten the rubber ring with a drop of
water.
ENGLISH 9
Quantities
5-25 g
10-50 g
25-75 g
25-75 g
25-75 g
25-75 g
25-50 g
25-75 g
20-40 g
25-50 g
25-75 g
Ingredients
peppercorns
sesame seed
rice, wheat
soy beans
dried peas
coconut flesh
coffee beans
cheese
breadcrumbs
sugar cubes
nuts (shelled)

C4Turn the assembled mill upside down and screw it onto the
motor unit in the direction of the arrow.
C5We advise you to operate the mill by means of the pulse
button (M-button).
Never use the mill for more than 30 seconds without interruption.
C◗After processing, you can use the shaker lid to sprinkle the
ingredients evenly onto a dish.
Cleaning
Cleaning of the appliance, its parts and the accessories is easiest
immediately after use.
Never clean the accessories or parts of the appliance in the
dishwasher.
Do not use abrasives, scourers, alcohol, etc.
1Unplug the appliance, detach the accessoiries and parts you
have used and clean them in warm soapy water.
2Then rinse these parts under the tap.
Quick cleaning of the blender jar
1Pour lukewarm water and some washing-up liquid into the
blender jar, up to the Quick Clean level indication (500 ml) on
the jar. Do not exceed this level when using the Quick Clean
function.
ENGLISH10