Philips HR2160/50 User manual

HR2170, HR2168, HR2167, HR2161, HR2160

2
20

3
11
10
17
21
20
19
23
22
18
9
8
16
15
7
6
14
13
512
3
4
2
1
HR2168, HR2167
HR2168HR2170 HR2168, HR2167
HR2161
HR2168, HR2167
HR2161, HR2160
1

4


 6
繁體中文 16
简体中文 25

6

Congratulations on your purchase and welcome to Philips! To fully benet from the support that
Philips offers, register your product at www.philips.com/welcome.
The appliance is equipped with a built-in safety system that prevents the appliance from functioning
if the accessories have been assembled incorrectly or have not been assembled at all.

 Motor unit with control knob
 Pulse setting
 Speed settings
 Ice button
 Plastic blender blade unit
 Plastic blender jar (HR2168/HR2167/HR2161/HR2160)
 Level indication
 Lid of plastic blender jar
 Opening in lid
 Measuring cup
 Filter (HR2168/HR2167 only)
 Glass blender blade unit
 Glass blender jar (HR2170 only)
 Level indication
 Lid of glass blender jar
 Opening in lid
 Measuring cup
 Coupling unit
 Chopper bowl (HR2168 only)
 Chopper blade unit
 Chopper lid
 Mill blade unit
 Mill beaker (HR2168/HR2167/HR2161 only)

Read this user manual carefully before you use the appliance and save it for future reference.


- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. Use only
a moist cloth to clean the motor unit.

- Check if the voltage indicated on the appliance corresponds to the local mains voltage before
you connect the appliance.
- If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by
Philips or similarly qualied persons in order to avoid a hazard.
- Do not use the appliance if the plug, the mains cord or other parts are damaged.
- Never use the blender jar, mill beaker (specic types only) or chopper bowl (specic types only)
to switch the appliance on and off.
- Never let the appliance run unattended.
- This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their
safety.


- Children should be supervised to ensure that they do not play with the appliance.
- Do not touch the blades, especially when the appliance is plugged in. The blades are very sharp.

- Always unplug the appliance before you assemble, disassemble or make adjustments to any of
the parts.
- Never use any accessories or parts from other manufacturers or that Philips does
not specically recommend. If you use such accessories or parts, your guarantee becomes
invalid.
- Do not exceed the maximum indication on the blender jar, the mill (specic types only) beaker
and the chopper bowl (specic types only).
- Do not exceed the maximum quantities and processing times indicated in the relevant table.
- The appliance can only be switched on if the blender jar, the mill beaker (specic types only) or
the chopper bowl (specic types only) is assembled on the motor unit correctly.


- Never reach into the blender jar with your ngers or an object while the appliance is running.
- Make sure the blade unit is securely fastened to the blender jar before you assemble the
blender jar onto the motor unit.
- Do not touch the cutting edges of the blender blade unit when you handle or clean it. They are
very sharp and you could easily cut your ngers on them.
- If the blade unit gets stuck, unplug the appliance before you remove the ingredients that block
the blades.

- Never ll the blender jar with ingredients hotter than 80ºC.
- To prevent spillage, do not put more than 1.5 litres of liquid in the blender jar, especially when
you process at a high speed. Do not put more than 1 litre in the blender jar when you process
hot liquids or ingredients that tend to foam.
- If food sticks to the wall of the blender jar, switch off the appliance and unplug it. Then use a
spatula to remove the food from the wall.
- Always make sure the lid is properly closed/assembled on the jar and the measuring cup is
inserted properly in the lid before you switch on the appliance.
- HR2170 only: The jar is made of glass and therefore breakable. Do not drop the jar on a hard
oor. Also avoid extreme thermal shocks. If the jar is very cold, rinse it well with lukewarm water
before you pour hot liquid into it. If the glass jar cracks, stop using it.


- Make sure the blade unit is securely fastened to the mill beaker before you assemble the mill
beaker onto the motor unit.
- Do not touch the cutting edges of the mill blade unit when you handle or clean it. They are very
sharp and you could easily cut your ngers on them.
- Never use the mill to grind very hard ingredients such as nutmeg and ice cubes.

- Never use the mill for more than 30 seconds without interruption. Let the mill cool down to
room temperature between processing cycles.
- Always process cloves, star anise and aniseed together with other ingredients. If processed
separately, these ingredients may attack the plastic materials of the appliance.
- The mill beaker may become discoloured when you use the mill to process ingredients such as
cloves, anise and cinnamon.
- The mill is not suitable for chopping raw meat. Use the blender or chopper instead.
 7

- Do not use the mill to process liquids such as fruit juice.


- Make sure the coupling unit is securely fastened to the chopper bowl before you assemble the
chopper onto the motor unit.
- Do not touch the cutting edges of the chopper blade unit when you handle or clean it. They are
very sharp and you could easily cut your ngers on them.
- Never reach into the chopper bowl with your ngers or an object while the appliance is
running.
- If the blade unit gets stuck, unplug the appliance before you remove the ingredients that block
the blades.

- Always make sure the lid is properly assembled on the chopper bowl before you switch on the
appliance.
- If food sticks to the wall of the chopper bowl, switch off the appliance and unplug it. Then use a
spatula to remove the food from the wall.


- Never use the lter to process ingredients hotter than 80°C.
- Never overload the lter. Do not ll the lter beyond its metal part.
- Always make sure the lid of the blender jar is closed/assembled properly and the measuring
cup is inserted properly in the lid before you switch on the appliance.
- Cut fruit into smaller pieces before you put it in the lter.
- Soak dried ingredients, such as soy beans, before you put them in the lter.

This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.

This feature ensures that you can only switch on the appliance if the blender jar and lid, the mill
beaker or the chopper bowl and lid (specic types only) are assembled on the motor unit properly.
If the blender jar and lid, the mill beaker or the chopper bowl and lid are correctly assembled, the
built-in safety lock will be unlocked.

The appliance is equipped with a motor circuit protector that switches off the motor if the motor
jams (which might occur during heavy processing jobs or if the appliance is not used according to
the instructions in the user manual). If this happens, rst switch off and unplug the appliance and let
it cool down to room temperature. Then check if the quantity of ingredients you are processing
does not exceed the quantity mentioned in the user manual or if something is blocking the blade
unit.

Thoroughly clean the parts that come into contact with food before you use the appliance for the
rst time (see chapter ‘Cleaning’).
8



,The blender is intended for:
- Blending uids, e.g. dairy products, sauces, fruit juices, soups, mixed drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.

1 Screw the blender blade unit clockwise onto the blender jar (Fig. 2).
2 Mount the blender jar with the blade unit attached to it onto the motor unit and turn it
clockwise until it locks into position (Fig. 3).
3 Put the ingredients in the blender jar.
Let hot ingredients cool down before you put them in the blender jar (max. temperature
80°C/175°F).
4 HR2170 only: fasten the lid on the jar by pressing it down (1) and turning it clockwise
(2). (Fig. 4)
Note: Make sure that the sieve in the lid is positioned in front of the spout of the jar to be able to pour
out liquids.
5 HR2168/HR2167/HR2161/HR2160 only: close the lid.
6 Insert the measuring cup into the lid (Fig. 5).
Note: To disassemble the blender, follow the instructions above in reverse order and direction.

Never reach into the jar with your ngers or an object (e.g. a spatula), while the blender is
running.
Do not exceed the maximum level indicated on the blender jar.
1 Put the mains plug in the wall socket.
2 Switch on the appliance. (Fig. 6)
Note: See the blender table at the end of this user manual for the recommended quantities, speed
settings and processing times.
- To process ingredients at a particular speed, turn the control knob to the required speed setting.
Do not let the appliance run for more than 2 minutes at a time. Let the appliance cool down to
room temperature before you continue processing.
- To process ingredients very briey, turn the control knob to the pulse setting (P) several times.
Never use the pulse setting longer than a few seconds at a time.
- To crush ice, press the ICE button.
3 When you have nished processing, set the control knob to 0 and unplug the appliance.
Always set the control knob to 0 before your open the lid.

- To prevent spillage, do not put more than 1.5 litres of liquid in the blender jar, especially when
you process at a high speed. Do not put more than 1 litre in the blender jar when you process
hot liquids or ingredients that tend to foam.
- You can use the opening in the lid to add ingredients while the appliance is running (Fig. 7).
 9

- Do not process dry ingredients for more than 1 minute.
- Cut solid ingredients into smaller pieces before you put them in the blender jar. Do not process
a large quantity of solid ingredients at the same time. Process these ingredients in a series of
small batches instead.
- If you are not satised with the results when you blend solid ingredients, use the pulse setting a
few times to let the blender run briey. If you want to use a spatula, switch off the appliance,
open the lid and then stir the ingredients. You can also remove some of the contents of the jar
and process smaller amounts.
- To crush ice cubes, put max. 5 cubes in the jar at a time and press the ICE button a few times.
HR2170 only: The jar is made of glass and therefore breakable. Do not drop the jar on a hard
oor. Also avoid extreme thermal shocks. If the jar is very cold, rinse it well with lukewarm water
before you pour hot liquid into it. If the glass jar cracks, stop using it.

You can use the lter to obtain extra nely blended sauces, fresh fruit juices or cocktails. All pips and
skins are caught in the lter.
HR2170/HR2160: You can order the lter (type number HR2963) from your Philips dealer.
Never ll the lter beyond its metal part.
Do not use the lter to process hot ingredients.

1 Assemble the blender jar onto the motor unit (see section ‘Preparing the blender for use’ in
this chapter).
2 Put the lter in the blender jar (Fig. 8).
Make sure the lter is placed properly on the bottom of the jar.
The grooves of the lter and the ribs inside the blender jar help you put the lter in the right
position.
3 Close the lid.

1 Put the ingredients in the lter through the opening in the lid.
Cut fruits into smaller pieces and soak dried pulses, such as soy beans, before you process them in
the lter.
2 Add water or another liquid.
3 Put the measuring cup in the lid, set the control knob to the highest speed and let the
appliance run for max. 40 seconds.
4 Set the control knob to 0 and remove the blender jar from the motor unit.
5 Pour out the drink through the spout of the blender jar (Fig. 9).
Make sure the lid is closed and the measuring cup is in the lid. This prevents pulp and skins from
ending up in your drink.
6 For optimal results, put the jar with the remaining ingredients back onto the appliance,
without opening/removing the lid. Then let the appliance run for a few more seconds.
7 Pour out the rest of the drink.
8 When you have nished processing, set the control knob to 0 and unplug the appliance.
10


- When you process a large quantity, we advise you not to put all the ingredients in the lter at
the same time. Start to process a small quantity and let the appliance run for a few seconds.
Then switch off the appliance and add another small quantity. Repeat this procedure until you
have processed all the ingredients. Always keep the lid on the blender jar during processing.
- To get the best result when you make fruit juices and cocktails, add approx. 300ml water to
150g fruit. You can also use other liquids, e.g. to make cocktails.
- To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the
lid onto the rotating blades.

You can use the mill to grind and chop ingredients such as peppercorns, sesame seeds, rice, wheat,
coconut esh, nuts (shelled), coffee beans, dried soy beans, dried peas, cheese, breadcrumbs, etc.
Always process cloves, star anise and aniseed together with other ingredients. If processed
separately, these ingredients may attack the plastic materials of the appliance.
The mill is not suitable for chopping very hard ingredients like nutmeg and ice cubes.
Do not exceed the maximum level indicated on the mill beaker.

1 Put the ingredients in the mill beaker (Fig. 10).
Note: See the mill table at the end of this user manual for the recommended quantities and processing
times.
2 Screw the mill blade unit clockwise onto the mill beaker (Fig. 11).
3 Turn the assembled mill upside down and screw it clockwise onto the motor unit (Fig. 12).

1 Switch on the appliance.
We advise you to use the pulse setting or speed setting 5.
Never let the mill run for more than 30 seconds without interruption.
2 When you have nished processing, set the control knob to 0 and unplug the appliance.
3 To remove the mill from the motor unit, turn the mill anticlockwise.

You can use the chopper to chop ingredients such as onions, meat, herbs, vegetables, fruit, chocolate,
rm cheese, baby food and nuts.
HR2170/HR2161/HR2160: You can order the chopper (type number HR2965) from your Philips
dealer.
Do not use the chopper to mix liquids. Use the blender for this purpose.
1 Insert the coupling unit of the chopper into the bottom of the chopper bowl (1). Turn the
coupling unit anticlockwise to x it (2) (Fig. 13).
2 Place the chopper bowl (1) on the motor unit and turn it clockwise to x it (2). (Fig. 14)
3 Place the chopper blade unit in the chopper bowl (Fig. 15).
4 Put the ingredients in the chopper bowl (Fig. 16).
 11

Note: See the chopper table at the end of this user manual for the recommended quantities and
processing times.
Do not exceed the maximum quantities indicated in the table.
Tip: Precut large pieces of food into pieces of 1-2cm.
5 Put the lid on the chopper bowl (1) and turn it clockwise to x it (2) (Fig. 17).
Note: Make sure the lid is properly xed before you switch on the appliance.
6 Switch on the appliance.
Note: If the appliance shakes because the food is not evenly distributed, put your hand on the lid.
Note: The chopper does its work in a few seconds. Never let it run longer than a few seconds.
7 When you have nished processing, set the control knob to 0 and unplug the appliance.
8 Turn the chopper bowl anticlockwise (1) and remove it from the motor unit (2). (Fig. 18)
9 Turn the coupling unit clockwise (1) and remove it from the bottom of the chopper
bowl (2) (Fig. 19).
10 Remove the lid and the blade unit from the chopper bowl.
Be careful when you handle the blade unit. The cutting edges of the blade unit are sharp.
11 Empty the chopper bowl.
Always remove blade unit from the chopper bowl and the chopper from the motor unit before
you empty the chopper bowl.

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
1 Switch off and unplug the appliance.
2 Disassemble all removable parts before you clean them.
3 Clean the different parts of the appliance as indicated in the cleaning table.
Tips:
- Cleaning the appliance and its parts is easiest immediately after use.
- If necessary, clean the mesh of the lter with a very soft brush.

1 Fill the blender halfway with warm water and add a few drops of washing-up liquid.
2 Turn the control knob to the pulse setting a few times.
3 Detach the blender jar, empty it and rinse it under the tap.

1 To store the mains cord, push it into the cord storage compartment in the base (Fig. 21).
2 Store the appliance in a safe and dry place.
12


- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 22).

If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country (you nd its phone
number in the worldwide guarantee leaet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.

For more recipes, visit our website www.philips.com/kitchen.


- 250g cooked chicken meat
- 250g cooked potatoes
- 250g cooked green beans
- 450ml milk
1 Assemble the blender jar onto the motor unit (see section ‘Using the appliance’).
2 Precut the ingredients into pieces of 2x2x2cm.
3 Put the ingredients in the blender jar.
4 Blend the ingredients for 25 seconds (or longer for a ner result).
Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before
you process the next batch of ingredients.


- 180g soy beans (soaked)
- 500ml warm water
1 Soak the soy beans in fresh water for at least 4 hours until they are soft.
2 Process the soaked soy beans with 500ml warm water in the blender for approx 60 seconds
until you have obtained a smooth liquid.
Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before
you process the next batch of ingredients.


- 2g aniseed
- 2g star anise
- 2g Chinese cassia
- 2g cloves
- 2g Chinese liquorice
1 Put all ingredients in the mill beaker.
2 Grind the ingredients for 30 seconds.
 13

Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before
you process the next batch of ingredients.


- 20g shallots
- 15g garlic
- 7g galangal
- 9g lemongrass
- 2 cloves
- 1 tbsp coriander seeds
- 1 tbsp cumin seeds
- 3 dried chillies
- 5 peppercorns
- 1 tbsp shrimp paste
- 1 tbsp salt
1 Cut the galangal into slices of approx. 1cm.
2 Put all ingredients in the mill beaker.
3 Grind the ingredients for 30 seconds.
Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before
you process the next batch of ingredients.


- 20g fresh red chillies
- 30g shallots
- 2 cloves garlic
1 Cut the chillies and shallots into large pieces that t into the chopper bowl.
2 Put the chillies, shallots and garlic in the chopper bowl.
3 Chop the ingredients for 30 seconds.
Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before
you process the next batch of ingredients.
14


If the appliance does not work or does not work properly, rst check the list below or visit the
Philips website at www.philips.com/welcome. If the problem is not mentioned in this list or on the
internet, the appliance probably has a defect. In that case we advise you to take the appliance to
your dealer or to an authorised Philips service centre.
Question Answer
Why doesn’t the
appliance work?
This appliance is equipped with a safety system. The appliance does not
work if the blender jar with lid, the chopper bowl with lid (specic types
only) or the mill beaker (specic types only) are not assembled correctly
on the motor unit or are not assembled at all. Check if you have
assembled the blender jar with lid, the chopper bowl with lid or the mill
beaker correctly (see the various sections in this user manual). Set the
control knob to 0 rst.
Can I clean all
removable parts in the
dishwasher?
Yes, except the motor unit and the coupling unit of the chopper (specic
types only).
What does ‘pulse’
mean?
When you turn the control knob to the pulse setting, the appliance runs
at its highest speed as long as you keep the knob in this position. Use the
pulse setting if you want to have more control over the processing jobs.
Can I pour boiling hot
liquids into the
blender jar?
No, let hot liquids cool down to 80°C/175°F to avoid damage to the jar.
Why does the motor
produce an unpleasant
smell during
processing?
It is common for a new appliance to give off an unpleasant smell or emit
some smoke the rst few times it is used. This phenomenon stops after
you have used the appliance a number of times. The appliance may also
give off an unpleasant smell or emit some smoke if it has been used too
long. In this case, set the control knob to 0 and let the appliance cool
down for 60 minutes.
The appliance stopped
running because the
blade unit is blocked.
What should I do?
Set the control knob to 0 and use a spatula to dislodge the ingredients
that block the blade unit. We also advise you to process a smaller
quantity.
Why does the fruit
juice or soy milk
contain a lot of pulp
or skins?
To prevent pulp and skins from ending up in your drink, make sure that
the lter (specic types only) is placed properly in the jar, the lid is closed
and the measuring cup is inserted in the lid.
The blender jar leaks.
What should I do?
Set the control knob to 0 and pour out the ingredients. Make sure that
the sealing ring is properly in place on the blade unit. Also make sure
that the blade unit is assembled correctly.
 15

16
簡介
恭喜您購買本產品並歡迎加入飛利浦！請於 www.philips.com/welcome 註冊您的產品，
以善用飛利浦提供的支援。
本產品配備內建式安全裝置，如果附件安裝有誤或尚未安裝時，機器將無法運作。
一般說明 (圖 1)
 馬達座 (附控制鈕)
 瞬間開關
 速度設定
 碎冰按鈕
 塑膠果汁機刀組
 塑膠果汁壺 (HR2168/HR2167/HR2161/HR2160)
 刻度標示
 塑膠果汁壺蓋
 蓋子開口
 量杯
 濾網 (限 HR2168/HR2167)
 玻璃果汁機刀組
 玻璃果汁壺 (限 HR2170)
 刻度標示
 玻璃果汁壺蓋
 蓋子開口
 量杯
 組合座
 攪拌槽 (限 HR2168)
 切碎機刀組
 攪拌槽蓋
 研磨刀組
 研磨機容器 (限 HR2168/HR2167/HR2161)
重要事項
在使用本產品前，請先仔細閱讀本使用手冊，並保留說明以供日後參考。
一般
危險
-不可將馬達座整個浸在水中或其他液體裡，亦不可將其放在水龍頭下沖洗；請以濕布
清潔馬達座。
警示
-在您連接產品電源時，請先檢查產品上所標示的電壓是否與當地主電壓吻合。
-如果電線損壞，則必須交由飛利浦、飛利浦授權之服務中心，或是具備相同資格的技
師更換，以免發生危險。
-插頭、電線或其他組件受損時，請勿使用本產品。
-切勿使用果汁壺、研磨機容器 (限特定機型) 或攪拌槽 (限特定機型) 來開啟或關閉產品
電源。
-不可在無人看顧的情況下任由產品運作。
-基於安全考慮，在缺乏監督及適當指示之下，本產品不適用於孩童及任何身體、知
覺、或心理功能障礙者，或缺乏使用經驗及知識者。
-請勿讓孩童使用本產品或當成玩具。
-請勿觸碰刀片，尤其是當果汁機插上電源時。刀片非常銳利。
繁體中文

警告
-在您組裝、拆解或調整任何零件之前，請務必拔除本產品插頭。
-請勿使用其他製造商的任何配件或零件，或非飛利浦建議之配件或零件。如果您使用
此類配件或零件，保修即會失效。
-請勿超過果汁壺、研磨機容器 (限特定機型)、攪拌槽 (限特定機型) 上的最高容量刻
度。
-請勿超過相關表格中註明的最大用量與處理時間。
-只有果汁壺、研磨機容器 (限特定機型) 或攪拌槽 (限特定機型) 正確組裝在馬達座上
後，才能開啟本產品電源。
果汁機
警示
-當產品運轉時，絕對不可以將手指或其他物品伸入內。
-將攪拌杯組裝到馬達座上之前，確定刀組已穩固安裝在攪拌杯中。
-清潔時避免觸碰研磨機刀組的刀鋒。刀鋒相當鋒利，接觸刀鋒很容易會割傷手指。
-如果刀組卡住，請先拔掉插頭，再將卡住刀片的食材取出。
警告
-請勿將溫度超過 80ºC 的食材放入果汁壺中。
-為了避免溢出，果汁壺內不可倒入超過 1.5 公升的液體，特別是以高速處理時。當處
理高溫液體或會產生泡沫的食材時，放入果汁壺內的食材不可超過 1 公升。
-如果食材黏附在果汁壺的壁面，將產品的電源關閉，並拔除插頭，然後用刮刀將食材
刮下。
-在您開啟果汁機電源之前，請務必確認已妥善蓋好/裝好蓋子，也確實將量杯插入蓋
中。
-限 HR2170：果汁壺是以玻璃製成，因此屬於易碎品。請避免果汁壺掉落到硬質的地
板上，此外也須避免過於激烈的溫度變化。如果果汁壺很冰，倒入高溫液體之前，先
以溫水沖淋一番。玻璃果汁壺若出現裂痕，請停止使用。
研磨機 (限 HR2168/HR2167/HR2161)
警示
-將研磨機容器裝到馬達座上之前，確定刀組已穩固安裝在研磨機容器中。
-清潔時避免觸碰研磨刀組的刀鋒。刀鋒相當鋒利，接觸刀鋒很容易會割傷手指。
-切勿使用研磨機研磨非常硬的材料，例如肉豆蔻和冰塊。
警告
-研磨機的連續操作時間不可超過 30 秒。每次處理的間隔時間，要讓研磨機冷卻至室
溫。
-攪拌丁香、大茴香與洋茴香時，務必加入其他食材。如果單獨處理，這些香料對本電
器的塑膠材料會有不好的影響。
-當研磨機用來處理如丁香、大茴香和肉桂這類食材時，研磨機容器可能會變色。
-研磨機並不適合用來攪碎生肉；若要攪碎生肉，請使用攪拌機或切碎機。
-請勿使用研磨機處理液態物質，如果汁。
切碎機 (限 HR2168)
警示
-將切碎機裝到馬達座之前，請先確定組合座已穩當固定在攪拌槽中。
-清潔時避免觸碰切碎機刀組的刀鋒。刀鋒相當鋒利，接觸刀鋒很容易會割傷手指。
-產品運轉時，絕對不可以將手指或其他物品伸入切碎槽內。
-如果刀組卡住，請先拔掉插頭，再將卡住刀片的食材取出。
警告
-開啟產品電源前，請務必確認蓋子已妥善組裝在切碎槽上。
繁體中文 17

-如果食材黏附在切碎槽的壁面，請將電源關閉，並拔除插頭，然後用刮刀將食材刮
下。
濾網 (限 HR2168/HR2167)
警告
-切勿使用濾網處理溫度超過 80°C 的食材。
-請勿超過濾網的負荷。濾網的盛裝量不可超過金屬部分。
-請隨時注意：在您開啟電源前，請先確定已妥善蓋好/裝好蓋子，也確實將量杯插入蓋
中。
-請先將水果切成小塊後再放入濾網。
-乾燥的食材，如黃豆，在放入濾網前先經過浸泡。
電磁波 (EMF)
本飛利浦產品符合電磁波 (Electromagnetic fields，EMF) 所有相關標準。只要使用方式正
確並依照本使用手冊之說明進行操作，根據現有的科學研究資料，使用本產品並無安全顧
慮。
內置安全鎖
這項功能可確保只有在果汁壺及蓋子、研磨機容器或切碎碗槽及蓋子 (僅限特定機型) 正確
組裝在馬達座上後，才能開啟產品電源。如果果汁壺及蓋子、研磨機容器、或切碎碗槽及
蓋子組裝正確，內置安全鎖即自動解除。
馬達電路保護裝置
本產品配有馬達電路保護裝置，當馬達卡住時 (在處理大量食材或沒有依照使用手冊中的
說明使用本產品時，可能會發生這種情況)，會自動關閉馬達。若發生這種情況，請先關閉
本產品電源並拔下插頭，待產品溫度降低至室溫。然後再檢查您處理的食材是否超過使用
手冊所述數量，或者刀組是否被卡住。
第一次使用前
第一次使用本產品前，請先徹底清潔會接觸食物的機身部分 (請參閱「清潔」單元)。
使用此產品
果汁機
,攪拌機的用途：
-攪拌液體，例如乳製品、醬汁、果汁、湯、混合飲料、奶昔等。
-攪拌軟質食材，例如煎餅糊或美乃滋。
-攪爛煮熟的食材，例如製作嬰兒食品。
準備使用果汁機
1 依順時針方向，將攪拌杯刀組旋緊到果汁壺上。 (圖 2)
2 將裝好刀組的果汁壺接到馬達座上，再依照順時針方向轉動，至鎖入定位為止。 (圖 3)
3 將材料放入果汁壺。
先讓熱食材冷卻，再放入攪拌杯 (最高溫度 80°C/175°F)。
4 限 2170：將蓋子固定到果汁壺的方法 - 先下壓 (1) 再以順時針方向旋轉 (2)。 (圖 4)
注意： 確定蓋子所附篩網的位置是在壺嘴前方，以便能將液體倒出。
5 限 HR2168/HR2167/HR2161/HR2160：蓋上蓋子。
6 將量杯插入蓋中。 (圖 5)
注意： 若要拆卸果汁機，請依相反順序與方向，執行上述說明。
繁體中文18

使用果汁機
攪拌機轉動時，切勿將手指或其他物件 (例如橡皮刮刀等) 伸進果汁壺中。
容量不得超過攪拌杯的最高容量刻度。
1 將電源插頭插入牆上插座。
2 開啟產品。 (圖 6)
注意： 有關建議的用量、速度調整位置及處理時間，請參閱本使用手冊最後的「果汁機」
表格。
-如果要以特定速度處理食材，請將控制鈕轉到想要的速度設定。
本產品運轉時間一次不可超過 2 分鐘。請先讓本產品冷卻至室溫，然後再繼續進行處理。
-如果要非常快速處理食材，請將控制鈕轉到瞬間開關 (P) 數次。
瞬間開關一次不可使用超過數秒時間。
-如果要碎冰，請按下 ICE (碎冰鈕)。
3 完成處理後，請將控制撥鈕轉到「0」，並拔除電源插頭。
開啟蓋子前，請務必將控制鈕轉到「0」。
提示
-為了避免溢出，攪拌杯內不可倒入超過 1.5 公升的液體，特別是以高速處理時。當處
理高溫液體或會產生泡沫的食材時，放入攪拌杯內的食材不可超過 1 公升。
-產品運轉時，您可以利用蓋子的開口加入食材。 (圖 7)
-乾燥食材的處理時間請勿超過 1 分鐘。
-先將固體食材切成小塊狀，再放入攪拌杯裡。請勿一次處理大量的固體食材；請改以
少量多次的方式來進行處理。
-固體食材經過攪打之後，若尚未達到滿意的效果，請按壓幾次瞬間開關，讓果汁機短
促運轉。如果您想使用刮刀，請先關閉本產品，再打開蓋子攪拌食材。您也可以取出
壺中的某些食材，分小量處理。
-若要打碎冰塊，壺中最多一次可放 5 個冰塊，然後按下 ICE (碎冰鈕) 數次。
限 HR2170：果汁壺是以玻璃製成，因此屬於易碎品。請避免果汁壺掉落到硬質的地板
上，此外也須避免過於激烈的溫度變化。如果果汁壺很冰，倒入高溫液體之前，先以溫水
沖淋一番。玻璃果汁壺若出現裂痕，請停止使用。
濾網 (限 HR2168/HR2167)
濾網附件可以用來攪打出特別綿密的醬料，新鮮果汁或雞尾酒。核籽和果皮都會完全留在
濾網中。
HR2170/HR2160：您可以向飛利浦經銷商訂購濾網 (型號 HR2963)。
濾網的盛裝量不可超過金屬部分。
不可用本濾網處理熱的食材。
準備使用濾網
1 將攪拌杯組裝到馬達座上 (請見本章節中的「準備使用果汁機」單元)。
2 將濾網放入果汁壺中。 (圖 8)
確定濾網妥善安裝在攪拌杯的底部。
濾網的溝槽和攪拌杯內的起伏紋路可方便您將濾網放在正確位置。
3 蓋上蓋子。
繁體中文 19

使用濾網
1 從蓋子的開口將食材放入濾網中。
以濾網處理食材之前，如為水果，請先切成小塊，乾貨例如黃豆等則須事先浸泡。
2 加入水或其他的液體。
3 將量杯插入蓋中，再把控制鈕調到最高速度，讓果汁機運轉最多約 40 秒。
4 將控制鈕轉到「0」，從馬達座拆下攪拌杯。
5 從攪拌杯的杯口倒出飲料。 (圖 9)
確定蓋子已蓋上，量杯也在蓋子內，如此可避免飲料之中殘留核籽和果皮。
6 為達最佳效果，請不要打開/取下蓋子，並將盛裝其餘食材的果汁壺放回產品上，再多
打幾秒鐘。
7 這時即可將其餘的飲料倒出。
8 完成處理後，請將控制撥鈕轉到「0」，並拔除電源插頭。
提示
-請注意，當您處理大量食材時，我們建議不要將所有的食材一次放入濾網內。一開始
先處理少量的食材，並讓果汁機運轉幾秒鐘，之後關閉果汁機電源，再另外加入少量
的食材。重複這個步驟直到您處理完所有食材為止。在處理期間，果汁壺一定要蓋上
蓋子。
-製作果汁或雞尾酒時，為達到最佳效果，150 公克的水果約搭配 300 毫升的水。您也
可以使用其他液體，例如製作雞尾酒。
-如果要打蕃茄汁，請將蕃茄切成四等份，再從蓋子開口將切塊的蕃茄投入轉動的刀片
中。
研磨機 (限 HR2168/HR2167/HR2161)
您可以使用研磨機，研磨或切碎胡椒粒、芝麻、米、小麥、椰肉、(去殼) 堅果、咖啡豆、
大豆、豌豆乾、起司、麵包粉等材料。
攪拌丁香、大茴香與洋茴香時，務必加入其他食材。如果單獨處理，這些香料對本電器的
塑膠材料會有不好的影響。
研磨機不適合用來切剁太硬的食材，例如肉豆蔻與冰塊。
容量不得超過研磨機容器的最高容量刻度。
準備使用研磨機
1 將食材放入研磨機的容器中。 (圖 10)
注意： 有關建議的用量及處理時間，請參閱本使用手冊最後的「研磨機」表格。
2 將研磨機的刀組以順時針方向鎖到研磨機的容器上。 (圖 11)
3 將組裝好的研磨機上下倒置，再以順時針方向鎖到馬達座上。 (圖 12)
使用研磨機
1 開啟產品。
建議使用瞬間開關，或將速度調整位置調到 5。
研磨機的連續操作時間不可超過 30 秒。
2 完成處理後，請將控制撥鈕轉到「0」，並拔除電源插頭。
3 如果要從馬達座拆下研磨機，請以逆時針旋轉研磨機。
繁體中文20