Philips CEM5100X/78 User manual

CEM5100
Register your product and get support at
www.philips.com/welcome
EN User manual 3
PT-BR Manual do Usuário 31

3
English
8 Adjust sound 22
Adjust volume 22
Mute 22
Turn Dynamic Bass Boost (DBB) on/off 22
Turn MAX sound on/off 22
Select preset equalizer 22
Switch music listening zone 22
Turn on/off full sound 22
Other sound settings 23
9 Adjust system settings 23
BT mode 23
Turn beep sound on/off 23
Select blackout setting 23
Turn demo mode on/off 24
Dimmer 24
Dance 24
LCD Color 24
Audiobook 24
Reset 25
10 Additional information 25
Detach the front panel 25
Replace fuse 25
Remove the unit 26
11 Product information 26
12 Troubleshooting 27
About Bluetooth device 28
13 Glossary 29
Contents
1 Important 4
Safety 4
Notice 4
2 Your car audio system 6
Introduction 6
What’s in the box 6
Overview of the main unit 7
Overview of the remote control 8
3 Get started 9
Install the car audio 9
Install remote control battery 12
Turn on 13
Select country/region 13
Set clock 13
4 Listen to radio 14
Tune to a radio station 14
Store radio stations in memory 14
Tune to a preset station 14
5 Use bluetooth devices 15
Pairing bluetooth devices 15
Make a call 15
Call transfer 15
Receive call 16
Terminate call 16
 
6 Play with RDS 16
Turn on RDS 16
Select program type 16
Select alternate frequencies 17
 
Set RDS clock 18
  
Play a disc 18
Play from USB 19
Insert a card 19
Play from iPod/iPhone 19
Play options 20
Connect external sound source 21

4
 Do not place any sources of danger on the

candles).
Notice
The making of unauthorized copies of copy-



copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Windows Media and the Windows logo

Microsoft Corporation in the United States
and/or other countries.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been


the developer to meet Apple performance
standards.Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards. Please note that

may affect wireless performance.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.

registered in the U.S. and other countries.
1 Important
Safety
 Read and understand all instructions
before you use your apparatus. If damage is

warranty does not apply.
 This apparatus is designed for negative
ground (earth) 12 V DC operation only.
 
a safe and comfortable level.
 Improper fuses can cause damage or

consult a professional.
 Use only the supplied mounting hardware
for a safe and secure installation.
 

control batteries to rain or water.
 Never insert objects into the ventilation
slots or other openings on the apparatus.
 
damp cloth. Never use substances such as

on the apparatus.
 Never place any objects other than discs
into the apparatus.
 

anti-static sprays intended for discs.
 Visible and invisible laser radiation when
open.Avoid exposure to beam.
 Risk of damage to the apparatus screen!

with any object.
Caution
 Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
 The apparatus shall not be exposed to
dripping or splashing.
EN

5
English
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to

polystyrene foam (buffer) and polyethylene

Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of

equipment.

device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2011 © Koninklijke Philips Electronics N.V. All
rights reserved.

notice.Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
This apparatus includes this label:
Recycling
Your product is designed and manufactured

which can be recycled and reused.
When you see the crossed-out wheel bin

product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products.The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by the

be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
This product complies with the radio
interference requirements of the European
Community.
EN

6
kQuick start guide
a
f
c
b
kji
h
g
2 Your car audio
system



at www.philips.com/welcome.
Introduction

your drive while you listen to:
 FM or AM (MW) radio
 Audio from CD or MP3 disc
 Audio from your mobile phone
 Audio from a USB drive
 Audio from a SD/SDHC card
 Audio from external devices

up a call on the audio system.
What’s in the box
Check and identify the contents of your
package:
aMain unit (with a sleeve)
bRemote control
cFront panel
dTrim plate
eCarrying case for front panel
fISO male connector
gRubber cushion
hScrew x 1 pc
iDisassembly tools x 2 pcs
jUser manual
EN

7
English
 Access music search in iPod/iPhone
mode.
d/
 Turn the unit on or off.
 
 Mute or unmute sound.
 Rotate to adjust volume.
eZONE /
 Select tuner band.
Overview of the main unit
aSOURCE
 Select audio source.
 Display LCD color.
b
 Press to answer or redial a call.
 Press and hold to transfer call.
cMENU
 Press and hold to access system menu.
 Return to previous menu.
m pnohrq
f
g
adc b
us t
lkji
e
EN

8
r
 Press to terminate call.
sRESET
 Restore default settings.
tSD card slot
uDisc slot
Overview of the remote
control
aVOL +/-
 Adjust volume.
b/
 Select tuner band.
 Scroll up/down menu.
 Select MP3/WMA folder.
c/
 Tune to a radio station
 Skip track.
 Fast backward/forward playback
a
b
d
c
e
f
 Select MP3/WMA folder.
 Switch music listening zone.
 Turn on or off full sound.
 Enter iPod/iPhone control mode.
f
 Eject disc.
g
 USB socket.
hMP3 LINK
 Connect external audio device.
i
 6281'
 Turn maximizing volume on or off.
 View clock.
jDBB
 Turn Dynamic Bass Boost (DBB)
sound on or off.
 Access to tuner auto store.
k
 Select preset radio station No.6.
 Start play.
 Pause or resume play.
lREP / SHUF
 Repeat play.
 
 Select preset radio station No.3/4.
m/
 Select preset radio station No.1/2.
 Search for track/folder.
n/
 Tune for radio station.
 Skip/search for track.
 Fast backward/forward playback.
oDISP
 Display current status.
 Turn the dimmer on or off.
pEQ / AUDIO
 Select equalizer (EQ) setting.
 Access audio setting menu.
q
 Unlock the panel.
EN

9
English
3 Get started
Caution
 Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.

model and serial number of your apparatus.The
model number and serial number are on the
bottom of your apparatus.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install the car audio
These instructions are for a typical installation.

make the corresponding adjustment. If you have

your Philips car audio dealer.
Caution
 This unit is designed for negative ground (earth) 12 V
DC operation only.
 Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
 
the ignition is off.
 Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
 Ensure that all loose leads are insulated with electrical
tape.
 Ensure that the leads do not get caught under screws
orin parts that will move (e.g. seat rail).
 Ensure that all ground (earth) leads are run to a
common ground (earth) point.
 Use only the supplied mounting hardware for a safe
and secure installation.
 

dSOURCE
 Select audio source.
eEQ
 Select equalizer (EQ) settings.
fOFF / /
 Turn the unit on or off.
 Mute or restore volume.
EN

10
1 Green/black
strip
Left speaker (Rear)
2 White/black
strip
Left speaker (Front)
3 Gray/black
strip
Right speaker (Front)
4 Purple/black
strip
Right speaker (Rear)
e Red Ignition key +12V DC
when ON/ACC
f Blue Motor/electric antenna
relay control lead
g Blue/white 
lead
h Black Ground
i Yellow To the +12V car
battery which is
energized at all times
3 

Note on the power supply lead (yellow)
 When you connect other devices to this

circuit is higher than the total fuse value of
all the connected devices.
Notes on speaker connection
 Never connect speaker wires to the metal
body or chassis of the car.
 Never connect speaker wires with stripes
to one another.
Connection: for cars with ISO
connectors
Caution
 Ensure that all loose leads are insulated with electrical
tape.
Note
 Consult a professional to connect CEM5100 as
instructed below.
1Connect the supplied male connector to
the unit.
2Check the car’s wiring carefully and
connect them to the the supplied male
connector.
Note
 Risk of danger! Please consult a professional to perform
the steps below!
EN

11
English
 If you disconnect the car battery in
a car that has an on-board drive or

may lose its memory.
 

bare wires do not touch each other.
2Ensure that car dashboard opening is
within these measurements:
3Remove the mounting sleeve with the
supplied disassembly tools.
4Install the sleeve into the dashboard and

Note
 

183 mm
53mm
5mm
Connector Connect to
1 ANTENNA Antenna
2 FRONT LINE OUT
R (Socket)
Front right
speaker
3 FRONT LINE OUT L
(Socket)
Front left
speaker
4 REAR LINE OUT R
(Socket)
Rear right
speaker
5 REAR LINE OUT L
(Socket)
Rear left
speaker
6 OE REMOTE
(Purple)
OE Remote
7 SUBWOOFER (Blue) Subwoofer
8 REAR AUX LINE
OUT R
Rear Aux
right
9 REAR AUX LINE
OUT L
Rear Aux left
Tip
 The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Be sure to make
proper connections to prevent damage to the unit.
Mount into the dashboard
1If the car does not have an on-board drive

negative terminal of the car battery.
f
g
h
REAR FRONT
R
L
REAR AUX
LR
i
EN

12
7Reconnect the negative terminal of the car
battery.
Attach the front panel
1Attach the trim plate.
2Insert the right side of the panel in the
chassis until it is correctly engaged.
3Press the left side of the panel until the
mechanism locks it into place.
Install remote control battery
Caution
 

 Risk of decreased battery life! Never mix different
brands or types of batteries.
 Risk of product damage! When the remote control is

 Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.

Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1Open the battery compartment.
5Place the supplied rubber cushion over the
end of the mounting bolt.
6Slide the unit into the dashboard until you
hear a click sound.
183 mm
53.5 mm
EN

13
English
 [M-EAST] (Middle East)
 [ASIA]
 [JAP] (Japan)
 [AUST] (Australia)
3Press 
Set clock
1Press MENU repeatedly until current time

2Rotate to set hour.
3Press 
4Rotate to set minute.
5Press 
Set clock format
1Press MENU.
2Press or repeatedly until [CLOCK
FORMAT] is displayed.
3Rotate to select a setting:
 [CLOCK 12H]
 [CLOCK 24H]
View clock
MAX SOUND
until the clock is displayed.
 Press any key to cancel the clock display.
2Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3Close the battery compartment.
Turn on

 press .

 press and hold until the unit is
turned off.
Select country/region
Note
 
the unit can not work properly.
1Press to turn the unit on.
»[SELECT OPERATING REGION] is
displayed.
2Rotate to select an option:
 [USA] (United States)
 [LATIN] (Latin America)
 [EUROPE] (Western Europe)
 [RUS] (Russia)
EN

14
 [LOCAL ON] (local on): Only
stations with strong signal can be
broadcast.
 [LOCAL OFF] (local off): Stations
with strong and weak signals can be
broadcast.
Store radio stations in
memory
You can store up to six stations in each band.
Store stations automatically
1 DBB until
[STORE - - -] is displayed.
2Press 
»The six strongest stations of the
selected band are saved in the preset
channel automatically.
Store stations manually
1Tune to a station that you want to store.
(see ‘Tune to a radio station’ on page 14)
2Press a numeric button for three seconds.
»The station is saved in the selected
channel.
Tune to a preset station
1  / to select band.
2Press a numeric key to select a preset
station.
4 Listen to radio
Tune to a radio station
1Press SOURCE repeatedly to select radio
mode.
2Press / repeatedly to select band:
[FM1][FM2][FM3][AM1][AM2] .
3Press and hold or until the

4Press or to tune to a radio station
manually.
»The radio station is broadcast.
 To search for a radio station
 or .
Select tuner region
You can select suitable country/region of the
radio.
1Press SOURCE to select radio mode.
2Press and hold MENU repeatedly until
[AREA] is displayed..
3Rotate to select:
 [USA] (United States)
 [LATIN] (Latin America)
 [EUROPE] (Western Europe)
 [RUS] (Russia)
 [M-EAST] (Middle East)
 [ASIA]
 [JAP] (Japan)
 [AUST] (Australia)
4Press 
Select tuner sensitivity
To receive more radio stations or only stations

sensitivity.
1Press and hold MENU repeatedly until
[LOCAL] is displayed.
2Rotate to select a setting:
EN

15
English
»[CONNECTED] is displayed if
connection is successful.
»[FAILED] is displayed if connection is
failed.
Make a call
Note
 
connection between the unit and the phone must be
active.
You can dial number through the mobile phone.
To make call through the mobile phone.
1Use the Mobile Phone to dial and make an
outgoing call.
2 [CALLING] is
displayed.
 To redial number.
1Press .
»[REDIAL] is displayed.
2Press / again.
»[CALLING] is displayed and the unit
starts dialing the number dialed last
time.
Call transfer
You can transfer voice from loudspeaker to
mobile phones during call.
Press and hold until [TRANSFER] is
displayed.
»Voice transfers from loudspeaker to mobile
phone.
5 Use bluetooth
devices


if bluetooth connection is available on your
phone or player.
Pairing bluetooth devices
You can pair your bluetooth device with the
unit as follows:
Note
 [BT
MODE] on the unit.
1Turn on bluetooth function on your device.
2Search for other bluetooth devices that
can pair with your device.
3Select “Philips” in the pairing list.
4Enter default password “0000”.
»[PAIR OK] is displayed on the panel if
pairing is successful.
»The paired device connect to the car
audio system automatically.
 To disconnect the bluetooth
1Press and hold MENU.
»[BT DISCONN] is displayed.
2Press / .
»[DISCONN OK] is displaysedif
disconnection is successful.
 To connect the bluetooth
1Press and hold MENU.
»[BT CONNECT] is displayed.
2Press / .
»[WAITING] is displayed.
EN

16
6 Play with RDS
The RDS (Radio Data System) function
operates only in areas with FM stations
broadcasting RDS signals. If you tune to an RDS

Turn on RDS
Note
 The default setting for RDS is on.
1Press and hold MENU.
2Press or repeatedly until [RDS] is
displayed.
3Rotate to select RDS ON:
»The RDS function is turned on.
Select program type

program type and let the unit search only for
programs of the selected category.
1Press and hold MENU.
2Press or repeatedly until [PTY] is
displayed.
3Press 
4Rotate  to

Receive call
1 
is displayed.
 if the incoming call has no phone
[PHONE IN] is displayed.
2Press to answer/accept the call.
Terminate call
Press to terminate call.

bluetooth devices
You can listen to audio from a bluetooth device
and control playback with the unit.
Press SOURCErepeatedly to select [BT
AUDIO].
  / .
Note
 
to start play manually.
 Some mobile phone needs to open the Media Players

  / again.
  / .
EN

17
English
Select alternate frequencies

Frequency) to search for another station with
stronger signal.
1Press and hold MENU.
2Press or repeatedly until [AF] is
displayed.
3Rotate to select a setting:
 [AF ON]: turn the AF mode on.
 [AF OFF]: turn the AF mode off.
Set region for AF tuning

[REG ON] Only stations in current region
can be tuned to automatically.
[REG OFF] All stations can be tuned to
automatically.
1Press and hold MENU.
2Press or repeatedly until [REG] is
displayed.
3Rotate to select a setting.




1Press and hold MENU.
2Press or repeatedly until [TA] is
displayed.
3Rotate to select a setting:
 [TA ON]

to the tuner mode (regardless of
the current mode) and begins to


returns to the previous mode.
Item Program type Description
1 NEWS News services
2 AFFAIRS Politics and
current affairs
3 INFO Special
information
programs
4 SPORT Sports
5 EDUCATE Education and
advanced training
6 DRAMA Radio plays and
literature
7CULTURE 
and society
8SCIENCE Science
9VARIED Entertainment
programs
10 POP M Pop music
11 ROCK M Rock music
12 EASY M Light music
13 LIGHT M Light classical
music
14 CLASSICS Classical music
15 OTHER M Special music
programs
16 WEATHER Weather
17 FINANCE Finance
18 CHILDREN Children’s
programs
19 SOCIAL Social Affairs
20 RELIGION Religion
21 PHONE IN Phone In
22 TRAVEL Travel
23 LEISURE Leisure
24 JAZZ Jazz Music
25 COUNTRY Country Music
26 NATION M National Music
27 OLDIES Oldies Music
28 FOLK M Folk Music
29 DOCUMENT Documentary
30 TEST AlarmTest
31 ALARM Alarm
EN

18
7 Play audio files
Note
 
Play a disc
Note
 You cannot play CDs encoded with copyright
protection technologies.
You can play commercially available audio CDs
and these discs:
 CD-Recordables (CD-R)
 CD-Re-writables (CD-RW)
 MP3 CDs
 WMA CDs
Note
 Ensure that the disc contains playable content.
Insert a CD with the printed side facing up.
»Play starts automatically.
  .
  again.
 
or .
 To search backward/forward rapidly within
 or for 3
seconds.
Remove the CD
 on the front panel.
 [TA OFF]
not cut in.
Note
 If the current received TA signal remains weak for

automatically.TheTA Seek will seek for other station
with good condition ofTA signal.
Tip
 
press 
unit will resume to previous playback mode.
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1Press and hold MENU.
2Press or repeatedly until [CT] is
displayed.
3Rotate to select a setting:
 [CT ON]: turn the RDS clock on.
Time shown on the unit synchronizes
with that on the RDS station.
 [CT OFF]: turn the RDS clock off.
Tip
 The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
EN

19
English
»The unit starts playing from the card
automatically.
Remove the card
1Press to turn the unit off.
2Press the card until you hear a click.
»The card is now disengaged.
3Remove the card.
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through
this unit.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin
dock connector:
Made for.
 iPod nano (2nd generation)
 iPod nano (3rd generation 4GB)
 iPod nano (3rd generation 8GB)
 iPod nano (4th generation)
 iPod nano (5th generation)
 iPod nano (6th generation)
 iPod classic (1st generation)
 iPod classic (2nd generation)
 iPod touch (1st generation)
 iPod touch (2nd generation)
 iPod touch (3rd generation)
 iPod video (30GB & 80GB)
Works with.
Tip
 
hold until the disc comes out.
Play from USB
Note
 Ensure that the USB device contains playable music.
Insert the USB device
1Slide the USB socket cover marked to
the left.
2Insert the USB device into the USB socket.
»The unit starts playing from the USB
device automatically.
Remove the USB device
1Press to turn the unit off.
2Remove the USB device.
Insert a card
Note
 This unit supports SD and SDHC cards.
1Press to release the panel.
2Insert the card into the card slot.
3Close the front panel.
EN

20
To control playback under audio control
mode:
  .
  / .
  /

   to
 
Search for a track
1Press SOURCE repeatedly to select iPod
mode.
2Press to browse iPod/iPhone menu.
3Rotate 
and press 
4Press DISP to search alphabetically.
5Rotate 
press 
6Rotate to select desired song in current
album.
7Press to start play.
Note
 User cannot control the music via iPod/iPhone under
audio control mode.
Play options
Search for an MP3/WMA track
Search within the current folder
1Press .
»The name of the current track is
displayed.
2Rotate to select anther track in current
folder.
3Press 
Search in other folder
1Press .
 iPhone
 iPhone 3G
 iPhone 3GS
 iPhone 4
Connect iPod/iPhone
1Slide the USB socket cover marked to
the left.
2Insert USB adaptor on one end of iPod/
iPhone cable to the USB socket on the
main unit.
3Insert the other end of the iPod/iPhone
cable to the iPod/iPhone socket.
»The unit starts playing from the USB
device automatically.
Control music playback on iPod/
iPhone
1Ensure that the iPod/iPhone is connected
correctly.
2Press SOURCE to select iPod USB mode.
3Press repeatedly to toggle between the
two control modes:
 iPod control mode: Use the buttons/
touch screen on iPod/iPhone to
control the music.
 Audio control mode: Use the control
buttons on car audio to control the
music.
EN

21
English
 [SHUFFLE ALL]: start random play for
all tracks.
 [SHUFFLE OFF]
Connect external sound
source
1Connect the external sound source to
MP3 LINK socket with a 3.5 mm cable.
2Press SOURCE repeatedly until [MP3
LINK] is displayed.
3Operate the external component (refer to
the instructions supplied with the external
component).
»The name of the current folder is
displayed.
2Rotate to navigate through all folders.
3Press to access the selected folder.
»
from the selected folder automatically.
Tip
  .
View play information
DISP repeatedly to view:
 Track number and elapsed play time
 Folder
 File
 Album
 Artist
 Title
Repeat play
1 REP.
»[REPEAT] is displayed.
2Rotate to select a setting.
 [REPEAT TRK] (repeat one track):
play current track repeatedly.
 [REPEAT FLD] (repeat a folder):
play all tracks in the current folder
repeatedly.
 [REPEAT ALL] (repeat all tracks): play
all tracks repeatedly.

You can play the tracks in random order:
1 SHUF.
»[SHUFFLE] is displayed.
2Rotate to select a setting:
 [SHUFFLE FLD]: start random play
for all tracks in the current folder.
EN