A
B
1
2
3
4
5
6
7
890!"$&
§%
18
19
/
20
21
22
a
b
c
d
183mm
53mm
Connect wires A B
Connector Connect to
1 Yellow wire The +12V car battery which is live at all times.
2 Blue/White wire The electric antenna control lead or power
supply lead of the antenna booster. If there is
no electric antenna or antenna booster, or it
is manually operated telescopic antenna, it is
unnecessary to connect this lead.
3 Black wire A metal surface of the car. Connect the black
ground (earth) lead before connect the yellow
and red power supply leads.
4 Red wire The +12V power terminal which is live in the
accessory (ACC) position of the ignition switch.
If there is no accessory position, connect to
the +12V car battery terminal that is always
live. Ensure that black ground (earth) lead is
5 Green and green/
black wires
Left speaker (Rear)
6 White and white/
black wires
Left speaker (Front)
7 Gray and gray/
black wires
Right speaker (Front)
8 Purple and
purple/black
wires
Right speaker (Rear)
Connector/Object Connect to/with
1 Pink wire Extension wire
2 Extension wire (not included) Parking brake (-)
3 Brake switch
4Ground
5 Purple wire Reverse camera (B+)
6 Gearbox switch
7 Reverse gear signal Black lamp lead +
8 ISO wires Connected in step 1 above
9 Yellow cable Video out
10 Red cable Rear line out (Right)
11 White cable Rear line out (Left)
12 Red cable Front line out (Right)
13 White cable Front line out (Left)
14 Red cable Audio in (Right)
15 White cable Audio in (Left)
16 Yellow cable Video in
17 Brown cable Camera in
18 Blue cable Subwoofer
19 White wire OE remote
20 Black wire Radio antenna
21 Black wire External microphone
22 Black wire GPS smart antenna
What’s in the box
Main unit and front
panel (with a sleeve)
Audio and
Video cable
Trim plateRemote control
Rubber
cushion
Remote control
battery
Carrying case for
front panel
Hexagon head
screwpanel
Screws
M4x8mm (x4)
User manual
ISO standard
connector Quick start
guide
ÁQuick start guide Turn on
1Press to turn the unit on.
» The available OSD (On-Screen Display) languages are displayed.
2
» The OSD language is changed to the selected language
immediately.
3
» The OSD region is changed to the selected radio region
immediately.
4
Pair the Bluetooth-enabled devices
Pairing with unit
1 Tap to display home menu.
2 Tap .
» The setting menu is displayed.
3 Tap to display Bluetooth setting menu.
4 Tap [New Pairing] to search for Bluetooth device with your device.
5 Select the name of desired device in the pairing list.
6 Enter default password “0000” in your device.
» iI the pairing succeeds. the phone call record is displayed.
Pairing with mobile phone
1 Open your mobile phone and switch on Bluetooth.
2Search for other Bluetooth device with your device.
3Select “CED780” in the pairing list.
4Enter default password “0000”.
» If the pairing succeeds, the dial screen is displayed.
Make a call
1Tap on top of the screen.
» The dial screen is displayed.
2Tap number icons directly to input phone number.
Tap to clear the last input.
Tap to clear all input.
Tap to go back to previous screen.
3 Tap to start calling.
4 During talking, tap to display the keypad.
Receive call
1If there is an incoming call, [Incoming call…] is displayed on the
screen.
2Tap (green) to answer/accept the call.
3When conversation ends, tap (red) to terminate the call.
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
CED780_QSG_98_V1.0
Register your product and get support at
CED780
EN Quick start guide
ZH-HK ҄ઢܞڲ
