Philips xenium x806 User manual

Discover your phone
Philips continuously strives to improve its products. Therefore, Philips reserves the rights to revise
this user guide or withdraw it at any time without prior notice. Philips provides this user guide "as is"
and does not accept, except as required by the applicable law, liability for any error, omission or
discrepancy between this user guide and the product described. The device is meant to be connected
to GSM/GPRS/EDGE networks.
Status pull-down
menu
USB port/charger &
headset connector
262K TFT LCD
touch screen
Power on/off key,
Unlock/lock key
+/- Volume key
Camera key
Hang-up key
Camera flash/
Torch
SIM settings
shortcut
Functional displays
Light sensor
Slide bar
Pick-up key
Back of phone
5.0MP
camera
lens
Loud
speaker
Shortcut icons
Microphone

1
How to...
Switch the phone On/Off Long press the power on/off key )on the top of the phone.
Enter your PIN code Enter your PIN code through the on-screen keypad and tap on
OK to confirm.
Unlock/lock the screen Short press )on the top of the phone. To lock the screen,
short press ).
Enter SIM settings on the idle
screen
On the idle screen, tap SIM settings shortcut .
Make a call On the idle screen, tap on to select a contact, or to
enter a phone number, and then, press A.
Answer a call When the phone rings, press A.
Mute the ringing call or sounding
alarm
When the phone/alarm rings, turn over the phone, front side
to the back, or back side to the front (if you have turned on the
options in > Settings > General > Motion sensor).
Activate/Deactivate handsfree
mode
During a call, tap on H-Free/H-Held.
End a call Press B.

2
View prompt screen of new
message/missed call
If receiving a new message/missed call, the prompt icon will
keep flashing on the idle screen. Tap on the icon to check for
new message/missed call.
Check or write messages On the idle screen, tap on .
Access the main menu On the idle screen, tap on .
Quickly return
to idle when browsing menus
Press B.
Show functional displays on the
idle screen
Go to > Settings > Dashboard. Select and turn on your
desired displays.
Switch between displays Slide the bar below displays. Or, tap on or .
Access the status pull-down menu Tap on at the top of idle screen. Tap to select options.
Enter the camera/video mode Long press the Camera key on idle screen. Tap / to select
the camera/video mode.

3
Select on-screen input keypads/
modes
Qwerty keypad : On the editing screen, turn the phone
counterclockwise by 90 degrees, vertical to horizontal.
Alphanumeric keypad : Turn the horizontal phone
clockwise by 90 degrees, horizontal to vertical.
Handwriting recognition mode : Tap on /
to switch between the two modes.
Tap on the language, numeric, or input method icon to select.

4
Quick access to functions
You can quickly access functions directly from
the idle screen (using the shortcut icons,
functional displays, or status pull-down menu),
or through the main menu.
Shortcut icons
On the idle screen, the four shortcut icons lead
you directly to four functional displays.
: Quick access to messaging
: Quick access to phonebooks
: Quick access to dial pad
: Quick access to main menu
Main menu
The main menu gives you access to all the
different features of your mobile phone. The
table below summarizes the functional icons on
the main menu. To find more information about
their functions, refer to the pages. Tap on on idle screen to access the main
Fun Browser Music
page 62 page 50 page 64
Camera Messaging My files
page 52 page 26 page 70
Tools Contacts Profiles
page 42 page 37 page 78
Bluetooth Calls Settings
page 75 page 73 page 79

5
menu. To select your option, tap on the icons
and lists, and then OK. Tap on Options to access
the options related to the selected item. Tap on
Back to return to the previous menu. Press B
to return to the idle screen.
Functional displays
On the idle screen, you can switch between up
to 9 displays. You can use the empty idle screen,
show clock time (if you select Analog or Digital in
Settings > General > Time & date > Display time),
or select a functional display.
With such functional displays, you can quickly
check world clock (World clock); or check or edit
to-do list (Calendar) or memos (Quick notes); or
conveniently send messages to up to 3 recent
contacts/numbers of outgoing messages
(Messaging); or place a call to preset contacts
just by a long tap (Quick call); or play music
(Music) or listen to radio (FM radio) from the
idle screen.
Customize functional displays
Select up to 7 functional displays as needed.
1. Go to Settings > Dashboard.
2. Select your option. Tap on On/Off to select
or unselect.
3. Tap on Done to finish setting.
Switch between different displays
• Slide the bar below displays.
•Or,tapon / .
Status pull-down menu
By dragging at the top of the idle screen, you
can quickly turn on/off the alarm, torch,
Bluetooth, or silent mode; check battery level;
and select your desired profile, or ring type for
incoming calls or messages.

6
SIM settings shortcut and prompt
screen
SIM settings shortcut and prompt screen are
located under status bar.
Tap SIM settings shoutcut icon to set your SIM
card slot1 and slot2.(see "SIM settings" on
page 79).
The prompt screen displays current prompt
informatin of phone. If receiving a new message,
E-mail or missed call, the prompt icon will
keep flashing. Tap on this icon to open prompt
screen, and tap to select the desired
information.
Stylus
The touch screen allows you to enter text by
directly writing on the screen, or tap to select
the desired option. The supplied stylus makes it
easier to do so.
The first time you switch on the phone, you are
asked to do calibration for the stylus. Thus,
strokes or taps by the stylus will be precisely
displayed on the screen.
You can also do the calibration in Settings >
General > Pen calibration by following the screen
instructions.
Sensor
With built-in motion and light sensors, the
phone can react to motion and ambient
luminance as desired or necessary.
To use the motion sensor
•InSettings > General > Motion sensor > Mute
incoming call or Snooze alarm, select On.

7
If a call rings, turn over the phone (front side to
back, or back side to front) to mute the
ringtone.
To interrupt the sounding alarm in the same
way, check that the Snooze is set to a time
interval in Tools > Alarm (see "To set an alarm"
on page 45). To stop the alarm, tap on Stop (see
"To use an alarm" on page 45).
To use the light sensor
•InSettings > Display > Light sensor, select On.
The phone will adjust backlight level
automatically according to ambient brightness.
For power-saving purposes, always turn on the
light sensor.
Power-saving mode
After the set time span, the phone has the idle
screen turned off automatically. To exit the
power-saving mode, press any key. For power-
saving purpose, set the time span to a low value
in Settings > Display > Backlight duration.
Auto screen lock
In the idle mode, your phone can have the
screen locked automatically after the set time
span. When the screen is locked, a set of
concentric circles keep moving on the screen.
To set the auto screen lock
Go to Settings > General > Auto screen lock.
To unlock the screen
Short press )on the top of the phone. Or,
drag out the innermost dot.
To lock the screen manually
Short press )on the top of the phone.

8Table of contents
Table of contents
1 Getting Started 12
Insert the SIM card 12
Charge the battery 14
Set clock 15
Display local and
international clocks 16
Insert the micro-SD card 16
2 Text Entry 17
Using the Qwerty keypad 17
Using the supplied stylus
(the handwriting recognition mode) 18
Using the alphanumeric keypad 18
3 Calling 21
Making a call 21
Answering and ending a call 22
Options during a call 23
Handling multiple calls
(Network-dependent) 24
Making an emergency call 25
4 Messaging 26
Creating messages 26
Sending messages from idle screen 28
Organizing your messages 29
Defining your message settings 30
E-mail 32
Broadcast messages 35
5 Contacts 37
Adding or editing contacts 37
Searching for a contact 38
Managing your contacts 39
Sharing contact information
with others 40
Table of contents

Table of contents 9
Backing up important contacts 40
Special numbers 41
6 Tools 42
Using your business organizer
Create your to-do list 42
Check your calendar 43
Edit your to-do list 43
Delete expired tasks 43
Using your memo
Display a text memo
on the idle screen 43
Record a sound memo 44
Using your clock and timer
Alarm 45
World clock 46
Stopwatch 46
Text reader 46
Using the torch 47
Using your business assistant
Back up your phonebook 48
Firewall 48
Calculator 49
Currency converter 49
7 Browser 50
Managing your browser 51
Accessing web sites 50
Enabling/ disabling push messages 50
STK 51
8 Camera 52
Camera 52
Video recorder 58
9 Fun 62
Java 62

10 Table of contents
Sensor games 63
10 Music 64
Music player 64
FM radio 67
11 My files 70
Finding your files 70
Managing your files 70
Sharing your files 71
Using your files 72
12 Calls 73
Call history 73
Call options 73
13 Bluetooth 75
About Bluetooth 75
Connecting to a Bluetooth device 75
Getting connected by
a Bluetooth device 76
Editing your device list 77
14 Profiles 78
Adjusting ringer settings to
different scenes 78
15 Settings 79
SIM settings 79
Customize the functional displays
on idle screen 80
General 80
Display 83
Sounds 83
Connectivity 84
Icons & Symbols 86
Precautions 88

Table of contents 11
Tips 94
Troubleshooting 95
Philips Authentic Accessories 99
Trademark Declaration 102
Specific Absorption Rate Information 103
Limited Warranty 105
Declaration of Conformity 109

12 Getting Started
1 Getting Started
Congratulations on your purchase and welcome
to Philips!
To get the most of your product and enjoy all
Philips has to offer, register your product at
www. philips. com/welcome.
Please read the safety instructions in the
"Precautions" section before use.
To use your phone, you must insert a valid SIM
card supplied by your GSM operator or retailer.
The SIM card contains your subscription
information, your mobile telephone number,
and a memory in which you can store phone
numbers and messages.
Insert the SIM card
Follow the steps below to insert your new SIM
card. Remember to switch off your mobile
phone before removing the back cover.
1. Press on the back cover and slide the cover
as shown.

Getting Started 13
2. As shown, take out the battery.
You may lose all your personal settings if you
remove the battery when the phone is switched
on.
3. As shown, align your SIM card with the SIM
card slot, clipped corner facing you and gold
contact downwards. Insert your SIM card
under the metal clip holder.
Figure 1
Figure 2

14 Getting Started
4. As shown, align the metallic connectors on
the battery and battery slot. Press the
battery down until it is locked.
5. As shown, slide the back cover along the
slots until it is locked.
Remove the protective film covering the screen
and camera lens before using the phone.
Charge the battery
Your phone is powered by a rechargeable
battery. A new battery is partially charged. The
battery symbol indicates the state of the battery.
To charge the battery, plug in the connector as
shown below. Then plug the other end into a
power socket.
During charging, the battery symbol scrolls.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not

Getting Started 15
damage the battery. The only way to turn off the
charger is to unplug it, so it is advisable to use an
easily accessible power socket.
If you do not intend to use your phone for
several days, we recommend that you remove
the battery.
You can use the phone while it is charging. If the
phone is extremely low on power, the low
battery images will only appear after a few
minutes of charging.
Set clock
1. Check that your phone is switched on. Long
press the power on/off key )if
necessary. Enter the PIN code if required. A
PIN code is a 4- to 8-digit secret code of
your SIM card. It is preconfigured and
communicated to you by your network
operator or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
2. On the idle screen, tap on and go to
Settings > General > Time & date.
Set format: Select the time (12-hour or 24-
hour clock) and date format by tapping the
desired options, and or .
Set time / Set date: Enter the time and date.
Tap on the box to be defined. To enter
your desired digits, tap or
repeatedly, or long press or until
you reach the desired digits.
3. To select how to display the time, go to
Settings > General > Time & date > Display
time:
Analog: Tap to show the time in a clock.
Digital: Tap to show the time in digits.
Ta p OK to confirm.

16 Getting Started
4. To show the clock display on idle screen,
slide the bar below displays (see "Switch
between different displays" on page 5).
Display local and international clocks
You can display two clocks on the idle screen,
one showing your local time and one the time of
your destination.
1. Check that you have set your local time and
date.
2. Go to Tools > World clock.
Local setting/Foreign setting: Tap or
repeatedly to select a city. If necessary, tap
Options to turn Daylight saving/Daylight saving
for foreign city on or off.
3. Check that you have set world clock as your
functional display on the idle screen (see
"Functional displays" on page 5).
Insert a micro-SD card (memory
card)
You can expand the memory of your phone by
adding a micro-SD card.
Storage capacity: up to 8 GB
1. Follow Step 1 and 2 under “Insert the SIM
card”.
2. As shown, push down the card holder and
lift it up. Align your micro-SD card with the
slot. Put it in place.
3. Press down the card holder and pull it until
it is locked.

Text entry 17
2 Text entry
Your mobile phone supports text entry through
the on-screen Qwerty keypad, on-screen
alphanumeric keypad, or the supplied stylus
(handwriting format).
Using the Qwerty keypad
Select text entry modes
• On the editing screen, turn your phone, if in
the vertical position, counterclockwise by 90
degrees.
Check that you are in an input mode other
than or .
Enter text
1. Ta p t o s e l e c t
: for English entry
:Pinyin input for Simplified
Chinese
: for numeric entry
Depending on the language you select for your
phone, the supported input formats may vary.
2. Tap on the keys to enter your desired
letters or numbers.
: Tap to move to the beginning of the
next line.
: Tap to delete the previous character.
: Tap to enter a space.
:Tap to enter symbols and
punctuations. Tap again to exit.
/ : Tap to switch between upper and
lower cases (for English entry).
3. Tap on Done to complete editing.

18 Text entry
Using the supplied stylus (the
handwriting format)
Select text entry modes
1. On the editing screen, turn your phone, if in
the horizontal position, clockwise by 90
degrees.
2. If necessary, tap on to select
: text entry through the supplied stylus
(handwriting format)
Enter text
1. Ta p t o s e l e c t
: for English entry
: for the entry of Simplified
Chinese
: for the entry of Traditional
Chinese
: for numeric entry
Depending on the language you select for your
phone, the supported input methods may vary.
2. Write on the screen using the supplied
stylus, as you do on paper using a pen.
: Tap to move to the beginning of the
next line.
: Tap to enter a space.
: Tap to enter symbols and
punctuations. Tap again to exit.
Using the alphanumeric keypad
Select text entry modes
1. Follow Step 1 under "Using the supplied
stylus (the handwriting format)".
2. If necessary, tap on to select
: text entry through the alphanumeric
keypad
Enter text
1. Tap to select, or repeatedly press ,
/ / / : for English
entry
: stroke input for Traditional

Text entry 19
Chinese
: Pinyin input for Simplified
Chinese
: for numeric entry
- Long press to turn T9 input on or
off (for suitable input formats only).
- To set preferred input formats, long press
. On the screen, you will only find
the icons for preferred input formats.
Depending on the language you select for your
phone, the supported input formats may vary.
2. Tap on the keys to enter your desired
letters, numbers, or strokes.
to Tap to input letters (T9 input)
Tap repeatedly to input the desired
letter (multi-tap input)
to Tap to enter strokes (stroke
input)
/ Tap to browse candidate words
on the previous/next page.
Tap to input symbols and punctuations
Tap to input a space
Clear Short press to clear a letter,
long press to clear all entries.
If necessary, tap on Clear to exit
the input mode first.
- Tap on a candidate word or Select to
select.
- To move to the beginning of the next
line, tap on and select .
3. If necessary, tap on Clear to exit the input
mode.
T9®input
T9®predictive text input is an
intelligent editing mode for
messages, which includes a
comprehensive dictionary. It
allows you to quickly enter text.
You need to press only once on
the key corresponding to each letter needed to
spell a word: keystrokes input are analyzed and
Tegic Euro. Pat.
App. 0842463