Philips HD4937 User manual

Overview 概覽 Preparing for use 準備使用
Using the induction cooker 使用電磁爐
Using the timer 使用定時功能
Cleaning 清潔
Recommended types and sizes of cookware 建議的廚具種類和大小
Specifications are subject to change without notice
© 2016 Koninklijke Philips N.V.
All rights reserved.
HD4937_AUS_UM_v4.0
HD4937
Always there to help you
Register your product and get support at
www.philips.com/welcome
Preset time for delayed cooking 預約時間延時烹飪
English
1 Your induction cooker
Congratulations on your purchase and welcome to
Philips! To fully benet from the support that Philips
oers, register your product at www.philips.com/
welcome.
2 What’s in the box
Induction cooker main unit Warranty card
Important information leaet User manual
Magnet
Overview
aCooking plate dControl panel
bCooking zone eAir outlets
cAir inlet fPower cord
Controls overview
gCongee button qOn/O button
hSaute button rHot Pot button
iSteam/Stew button sBoil button
jRoast button tIncrease button
kSoup button uPreset/Timer button
lMilk/Fondue button vDecrease button
mPreset indicator wManual button
nDisplay screen xSlow Cook button
oTimer indicator yMenu button
pCooking power
3 Before first use
Remove all packaging materials from the induction
cooker.
Preparing for use
1 Place the appliance on a dry, stable and level
surface.
2 Make sure there is at least 10cm free space around
the appliance to prevent overheating.
3 Always place the cookware on the cooking zone
during cooking.
4 Make sure you use cookware of the correct types
and sizes (see the table below).
Recommended types and sizes of
cookware
Material Cookware with a bottom made of iron or
magnetic stainless steel
Shape Cookware with a at bottom
4 Using the induction cooker
There are ten cooking modes: Congee ( ), Saute
( ), Steam/Stew ( ), Roast ( ), Soup ( ),
Milk/Fondue ( ), Slow Cook ( ), Manual ( ),
Boil ( ) and Hot Pot ( ).
1 Follow the steps in “Preparing for use”.
2 Press the On/O button ( ), the On/O indicator
lights up.
3 Press the cooking buttons or the Menu button
to choose the desired cooking mode. The
corresponding indicator lights up and the
induction cooker starts working in the selected
mode.
4 When the cooking is nished, press the On/O
button ( ) to switch o the appliance.
5 Unplug the induction cooker after the fan stops
working.
Note
• During cooking, you can change the power level by
pressing the Increase ( ) or Decrease ( ) button.
• In Boil ( ), Soup ( ), Steam/Stew ( ), Congee ( )
and Milk/Fondue ( ) modes, the cooking power
automatically changes for better cooking result.
Default cooking time and temperature
Refer to below table for the default cooking time and
temperature of dierent cooking modes.
Cooking mode Default cooking power
Congee ( )
1400W (0-2 mins)
1600W (3-15 mins)
1400W (16-25 mins)
400W (26-60 mins)
100W (60 mins onwards)
Saute ( ) 1200W (adjustable)
Steam/Stew ( )
1800W (0-5 mins)
1400W (6-15 mins)
1200W (15 mins onwards)
Roast ( ) 1200W
EN User manual ZH-T 使用手冊
Cooking mode Default cooking power
Soup ( )
1400W (0-2 mins)
1600W (3-15 mins)
1400W (16-25 mins)
400W (26-60 mins)
100W (60 mins onwards)
Milk/Fondue ( ) 800W
Slow Cook ( )
1800W (0-2 mins)
1600W (3-15 mins)
1400W (16-25 mins)
400W (26 mins onwards)
Manual ( ) 1200W (adjustable)
Boil ( )
Starts with 1800W.
When water is brought to boil,
the power drops to 800W
and the appliance keeps the
water at boiling temperature
for another 3 minutes. After
that the appliance turns o
automatically.
Hot Pot ( ) 1800W (adjustable)
Cooking
mode
Default
cooking
time
Timer Ideas for Use
Congee ( ) 3 hrs 1-180 mins Lentils,
Legumes,
Beans
Saute ( ) 2 hrs 1-120 mins /
Steam/Stew
( )
1 hr 1-120 mins Casseroles
Stewing Fruit
Roast ( ) 2 hrs 1-120 mins /
Soup ( ) 3 hrs 1-180 mins /
Milk/Fondue
( )
20 mins /Good for Dairy
Chocolate/
Cheese Fondu
Slow Cook
( )
6 hrs 1-600
mins
Lamb Shanks
Manual ( ) 2 hrs 1-120 mins Boiling water
and leaving
it on boil for
your Pasta &
Noodle
Maker Dem-
onstrations
Boil ( ) 20 mins /Bring water
to boil for a
cuppa
www.philips.com/welcome
User manual
HD4937
www.philips.com/welcome
Safety leaet
HD4937
www.philips.com/welcome
Warranty
HD4937
10cm
10cm
c
a
b
d
e
f
g h i j k l n om p
u tvwxy rs q
• If the magnet sticks to your pan / cookware, then it will be suitable
for use on your Philips induction cooker. Please use the magnet in
the box for checking.
• 如果磁性貼可以貼住您的平底鍋/炊具，則該平底鍋/炊具適用于您的飛利浦
電磁爐。請使用包裝盒內的磁性貼進行檢測。
Material: Ferrous/Magnetic
材質：鐵制/磁性

Cooking
mode
Default
cooking
time
Timer Ideas for Use
Hot Pot ( ) 2 hrs 1-120 mins It’s
recomanded
to use it
as Manual
mode, as you
can change
the power
manually.
Note
• Depending on the cookware being used or the
ingredients in the cookware, the actual cooking
temperature may be dierent.
Using the timer
You can use the Preset/Cooking Time button to
decide how much time you want the appliance to
work at dierent cooking modes (not applicable in
Boil ( ) and Milk/Fondue ( ) modes).
1 Follow the steps in “Preparing for use”.
2 Press the On/O ( ) button, the On/O ( )
indicator lights up.
3 Choose the desired cooking mode.
4 Press the Preset/Cooking Time button ( ) twice
until the timer indicator lights up.
5 Press the Increase ( ) or Decrease ( ) button to
adjust the time.
6 When the time has elapsed, the induction cooker
turns o automatically.
Note
• After you have selected the cooking time, wait for a
few seconds before the induction cooker automatically
conrms it.
• After the timer is set, you can press the Preset/Cooking
Time button ( ) again to cancel the timer.
Preset time for delayed cooking
You can use the Preset/Cooking Time button ( ) to
set the time at which you want the appliance to start
cooking. The preset timer is available up to 24 hours.
1 Follow the steps in “Preparing to use”.
2 Press the On/O button ( ), the On/O indicator
lights up.
3 Choose the desired cooking mode.
4 Press the Preset/Cooking Time button ( ) once
until the preset indicator lights up.
5 Press the Increase ( ) or the Decrease ( ) button
to choose the desired preset time.
6 When the preset time has elapsed, you will hear a
few beeps and the induction cooker starts working
automatically.
Note
• The preset timer is available in the following cooking
modes: Congee ( ), Steam/Stew ( ), Soup ( ),
Milk/Fondue ( ), Slow Cook ( ) and Boil ( ).
• After you have selected the preset time, wait for a few
seconds before the induction cooker automatically
conrms it.
• When the induction cooker is at preset mode, you can
press the Preset/Cooking Time button ( ) again to
cancel the preset time.
5 Cleaning
1 Unplug the appliance after the fan stops working
and let it cool down.
2 Clean the appliance with a damp cloth and, if
necessary, with some mild cleaning agent.
6 Recycling
Do not throw away the product with the normal
household waste at the end of its life, but hand it in
at an ocial collection point for recycling. By doing
this, you help to preserve the environment.
7 Guarantee and service
If you need service or information or if you have
a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer
Care Centre in your country (you will nd its phone
number in the worldwide guarantee leaet). If there
is no Consumer Care Centre in your country, go to
your local Philips dealer.
8 Troubleshooting
If your induction cooker does not function properly
or if the cooking quality is insucient, consult the
table below. If you are unable to solve the problem,
contact a Philips service centre or the Consumer
Care Centre in your country.
Problem Solution
The On/O
button ( ) does
not respond.
There is a connection problem.
Check if the induction cooker is
connected to the mains and if
the plug is inserted rmly into the
wall socket
Problem Solution
The appliance
beeps
continuously
and then stops
working.
You may have put unsuitable
cookware on the cooking plate
or you may have removed the
cookware from the cooking plate
during cooking. Make sure the
cookware is made of steel, iron
or aluminum with stainless steel
cladding base and has a base
diameter larger than 12cm.
You may have placed the
cookware outside of the cooking
zone.
The cookware
does not heat up
to the required
temperature.
The bottom of the cookware may
not be at. Use cookware with a
at bottom. If the problem still
exists, take the appliance to your
Philips dealer or a service center
authorised by Philips.
The appliance
stops working
suddenly.
The temperature of the cookware
might be too high. Let the
cookware cool down for a while.
The cooking
temperature
of the preset
modes are too
high or too low.
During cooking, you can change
the power level by pressing the
Increase ( ) or Decrease ( )
button.
When I press
one of the
cooking mode
buttons, the light
of the selected
mode does not
go on.
The light is defective. Take the
appliance to your Philips dealer
or a service centre authorised by
Philips.
The cooking
temperature
automatically
changes in some
preset modes.
In Boil ( ), Soup ( ), Steam/
Stew ( ), Congee ( ) and
Milk/Fondue ( ) modes,
the cooking temperature
automatically changes for better
cooking result.
Error code E1,
E2, E3, E4, or E7
is displayed on
the screen.
The induction cooker has
malfunction. Take the appliance
to your Philips dealer or a service
center authorised by Philips.
Error code E5 or
E6 is displayed
on the screen.
The voltage is either too high
or too low. Check if the voltage
in your home is suitable for the
induction cooker.
繁體中文
1 屬於您的電磁爐
恭喜你購買 Philips 產品，歡迎來到 Philips 世界！
要享受 Philips 為您提供的全面支援，請在以下網站
www.philips.com/welcome 註冊您的產品。
2 包裝盒內含物件
電磁爐主裝置 保用證
重要資訊單張 用戶手冊
磁性貼
概覽
a電磁爐板 d控制板面
b烹飪區 e排氣口
c進氣口 f電源線
控制鍵概覽
g煮粥按鈕 q開/關按鈕
h快炒按鈕 r火鍋按鈕
i蒸煮按鈕 s燒水按鈕
j鐵板燒按鈕 t增加按鈕
k煲湯按鈕 u預約/定時按鈕
l暖奶按鈕 v減少按鈕
m預約功能指示燈 w手動按鈕
n屏幕 x慢燉按鈕
o定時功能指示燈 y功能選擇按鈕
p烹飪火力
3 首次使用前
拆去電磁爐的所有包裝材料。
準備使用
1 將電磁爐放置於穩固、平坦的水平表面上。
2 確保機器周圍10公分內沒有其他物體，以防機器
過熱。
3 烹飪時請將廚具放置在烹飪區內。
4 確保您使用的廚具種類和大小正確。（請見下表）
建議的廚具種類和大小
材質 底部使用鐵或電磁不鏽鋼製做的廚具
外形 有平底的廚具
4 使用電磁爐
本產品共有十種烹調模式：煮粥（ ）、快炒（ ）、 蒸
煮（ ）、鐵板燒（ ）、煲湯（ ）、暖奶（ ）、 慢
燉（ ）、手動（ ）、燒水（ ）和火鍋（ ）。
1 遵照「準備使用」裡的步驟。
2 按下開/關按鈕（ ）， 開 /關指示燈便會亮起。
3 按下烹飪按鈕或功能選擇按鈕，即可選擇所要的烹飪
模式。相應的指示燈會亮起，而電磁爐會開始以所選
烹飪模式運作。
4 烹飪完畢後，按開/關按鈕（ ）關閉本產品。
5 等風扇停止運轉後，拔除電磁爐的插頭。
提示
• 烹飪時，您可以按增加按鈕（ ）或減少按鈕（ ）， 更
改火力等級。
• 在燒水（ ）、煲湯（ ）、蒸煮（ ）、煮粥（ ）和
暖奶（ ）模式中，烹調火力會自動按照最好的烹飪成果
進行變更。
預設烹飪時間和溫度
請參照下表，查看不同烹飪模式的預設烹飪時間和
火力。
烹飪模式 預設烹飪功率
煮粥 ( )
1400W (0-2 分鐘 )
1600W (3-15 分鐘 )
1400W (16-25 分鐘 )
400W (26-60 分鐘 )
100W (60 分鐘之後 )
快炒 ()1200W ( 可調節 )
蒸煮模式 ()
1800W (0-5 分鐘 )
1400W (6-15 分鐘 )
1200W (15 分鐘之後 )
鐵板燒 ( ) 1200W
煲湯 ( )
1400W (0-2 分鐘 )
1600W (3-15 分鐘 )
1400W (16-25 分鐘 )
400W (26-60 分鐘 )
100W (60 分鐘之後 )
暖奶 ()800W
慢燉 ( )
1800W (0-2 分鐘 )
1600W (3-15 分鐘 )
1400W (16-25 分鐘 )
400W (26 分鐘之後 )
手動 ( ) 1200W ( 可調節 )
烹飪模式 預設烹飪功率
燒水 ( )
起始功率為 1800W。 水煮沸
之後功率降為 800W。 產品繼
續工作 3 分鐘， 保持水為沸騰
狀態。 之後產品將自動關閉。
火鍋 ()1800W ( 可調節 )
烹飪模式 預設烹飪時間 定時時間
煮粥 () 3 小時 1-180 分鐘
快炒 () 2 小時 1-120 分鐘
蒸煮模式 () 1 小時 1-120 分鐘
鐵板燒 () 2 小時 1-120 分鐘
煲湯 () 3 小時 1-180 分鐘
暖奶 ()20 分鐘 /
慢燉 ( ) 6 小時 1-600 分鐘
手動 ( ) 2 小時 1-120 分鐘
燒水 ( ) 20 分鐘 /
火鍋 ( ) 2 小時 1-120 分鐘
使用定時功能
您可以使用預約/定時功能按鈕，選擇不同烹飪模式下
使用產品的時間（不適用於燒水（ ）和暖奶（ ）模
式）。
1 遵照「準備使用」裡的步驟。
2 按下開/關（ ）按鈕，開/關（ ）指示燈便會亮起。
3 選擇所需烹飪模式。
4 按下預約/定時功能按鈕（ ）兩次，定時功能指示燈
亮起為止。
5 按下增加（ ）或減少（ ）按鈕可調整時間。
6 時間過去之後，電磁爐會自動關閉。
提示
• 選好烹飪時間後，靜候數秒，電磁爐將會自動確認。
• 設定定時功能後，您可再次按下預約/定時功能按鈕（ ）
以取消定時功能。
預約時間延時烹飪
您可以利用預約/定時功能按鈕（ ）設定您想讓電磁爐
開始烹飪的時間。預約定時最長可達 24 小時。
1 遵照「準備使用」裡的步驟。
2 按下開/關按鈕（ ）， 開 /關指示燈便會亮起。
3 選擇所需烹飪模式。
4 按下預約/定時功能按鈕（ ）一次，預約指示燈亮
起為止。
5 按下增加（ ）或減少（ ）按鈕，選擇所要的預設
時間。
6 預設時間到時，您會聽到幾下嗶聲，電磁爐會自動開
始運作。
提示
• 您只能在以下模式中使用預約定時功能：燒水（ ）、
煮粥（ ）、蒸煮（ ）、煲湯（ ）、暖奶（ ）和
慢 燉（ ）。
• 選好預設時間後，靜候數秒，電磁爐將會自動確認。
• 當電磁爐在預約模式中時，您可以再次按下預約/定時功能
按鈕（ ）以取消預約時間。
5 清潔
風扇停止運轉後，拔除本產品的插頭，讓產品冷卻。
用濕布清潔本產品，必要時請使用溫和的清潔劑。
6 回收
請勿在本產品使用壽命結束後當作一般家庭垃圾廢棄，
應交給官方回收站作循環再用。這樣做有助保護環境。
7 保障及服務
如果您需要資料或有疑問，請前往 Philips 網站
www.philips.com，或聯絡您的國家的 Philips 顧客服
務中心（您會在全球保障小冊子上找到其電話號碼）。
如果您的國家沒有顧客服務中心，請前往當地的 Philips
經銷商。
8 疑難排解
若電磁爐無法正確運作，或電磁爐烹飪效率不佳，請參
照下表。若您無法解決問題，請聯絡飛利浦服務中心或
您所在國家的顧客服務中心。
問題 解決方案
開/關按鈕（ ）
沒有反應。
連接有誤。檢查電磁爐是否有連
接主電源，插頭和插座是否有鬆
脫。
產品持續發出嗶聲，
然後停止運作。
您可能在電磁爐板上放置不適合
的廚具，或者您在烹飪期間從電
磁爐板移走了廚具。確保廚具使
用鋼、鐵或鋁製成，備有不鏽鋼
電鍍的底部，而底部直徑超過 10
公分。
您或許將廚具放在烹飪區之外。
廚具沒有加熱到所
需溫度。
廚具底部或許並不平坦。使用有
平底的廚具。如果問題仍然持續，
請將產品拿至飛利浦經銷商或飛
利浦認可的服務中心。
產品突然停止運作。 廚具溫度可能過高。讓廚具冷卻
一會。
預設模式的烹飪溫
度過高或過低。
烹飪時，您可以按增加按鈕（
）或減少按鈕（ ），更改火力等級。
按下其中一個烹飪
模式按鈕後，已選
模式的燈沒有亮起。
指示燈損壞。請將產品拿至飛利
浦經銷商或飛利浦認可的服務中
心。
問題 解決方案
在部分預設模式中，
烹飪溫度會自動
變更。
在燒水（ ）、煲湯（ ）、蒸煮
（
）、煮粥（ ）和暖奶（ ）
模式中，烹調溫度會自動按照最
好的烹飪成果進行變更。
螢幕上顯示錯誤代
碼E1、E2、E3、
E4 或E7。
電磁爐出現故障。請將產品拿至
飛利浦經銷商或飛利浦認可的服
務中心。
屏幕顯示錯誤代碼
E5 或E6。
電壓過高或過低。檢查家中的電
壓是否適合電磁爐。